Jump to content

ARRI Artemis EFP Pro HD-SDI 12/24volt, with some extras (volt compatible)


Recommended Posts

  • Premium Members

AVAILABLE FROM DECEMBER 1st, 2022

Upgrading to the Artemis 2 sled so selling my original Artemis 1 sled (formally from Sachtler before ARRI purchased the range). Selling with cables, additional plate with AC support, c-stand and SOS plate. Upgraded power for both 12/24 volt cameras. The top stage and upper junction box were recently serviced at ARRI Australia (July, 2022). Comes in a Pelican luggage case for convenient travel. The travel case weighs 23kgs (50.7lbs) with a c-stand hidden in the lid. 3rd battery hanger for the lower sled is included but not pictured.

TIFFEN VOLT READY AND COMPATIBLE (…despite what Tiffen says). I’ve been running the M2 Volt on it for the past year without problems. [photo attached but Volt not included]

 

·         1 x ARRI Artemis EFP Pro HD-SDI 12/24 volt 1.5" post

·         1 x Transvideo Cinemonitor HD6 Classic

·         1 x Pelican Elite 30” Luggage [DISCONTINUED] (custom foam inside)

·         1 x Avenger C-stand with turtle base (black)

·         1 x Sachtler docking bracket

·         1 x SOS plate

·         2 x ARRI baseplates (including 1 x 15mm AC support rails)

·         1 x Follow Focus Bracket

·         1 x ARRI post tool

·         1 x cam power cable, Artemis EFP Pro > ARRI Alexa Mini, Mini LF, Amira 12V

·         1 x cam power cable, Artemis EFP Pro > Panavision

·         1 x cam power cable, Artemis EFP Pro > 12-volt Camera XLR

·         1 x accessories power cable, Artemis EFP Pro > 4-pin XLR

·         1 x accessories power cable, Artemis EFP Pro > Transvideo HD6 Monitor

·         1 x accessories power cable, Artemis EFP Pro > 2-pin LEMO

·         1 x BNC Analog video cable for Transvideo HD6

 

Located in Melbourne, Australia [AVAILABLE FROM DECEMBER 1st, 2022]
 
$14,000 USD (plus shipping)
 
info@glennclayton.com
 

Steadicam Artemis PIC 6.jpg

Steadicam Artemis PIC 5.jpg

Steadicam Artemis PIC 4.jpg

Steadicam Artemis PIC 3.jpg

Steadicam Artemis PIC 2.jpg

Steadicam Artemis PIC 1.jpg

Artemis 1 Steadicam Setup.jpg

Steadicam+Volt DEMO.jpg

Edited by Glenn Clayton
  • Like 1
Link to comment
Share on other sites

  • Glenn Clayton changed the title to ARRI Artemis EFP Pro HD-SDI 12/24volt, with some extras (volt compatible)
  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 3 months later...
  • 2 weeks later...
  • 4 weeks later...
  • 5 weeks later...
×
×
  • Create New...