Premium Members Jerry Holway Posted December 6, 2022 Premium Members Report Share Posted December 6, 2022 (edited) Kit for balancing newer Volts The original Volt weights had a ¼-20 screw built into the weight. However, the weight on the newer Volts has a counter-bored hole in the center for a ¼-20 screw. The kit makes it possible to add weights (i.e., big washers) and/or custom lightweight spacers in various combinations to precisely balance the Volt on the gimbal. The kit: 1 exterior sleeve (5 grams), 4x custom plastic spacers, 3x 11 gram/(.4oz) washers, 1x 6 gram/.2oz washer, and a longer ¼-20 screw - it might be needed, depending on your set up. In use, the Tiffen weight is moved outward a minimum of .078 inches and up to .375 inches, with added weights of 11 grams/.4oz to at least 50 grams/1.75 oz. $40 includes shipping in the USA via Priority Mail. Contact jholway@comcast.net Edited December 6, 2022 by Jerry Holway Link to comment Share on other sites More sharing options...
Recommended Posts