Pin configuration tables

[RobVanGelder]

I am looking for a website or a document that has the pin configuration of all camera´s for start/stop, power and what more, film and video too.

 

Does anybody know this?

Searching through the archives does bring up something but it is all scattered and not what i need right now.

 

Now i need the 3-pin config from Arri

[Matt Petrosky]

Now i need the 3-pin config from Arri

 

Assuming you are talking about the small "RS" port on the 24 volt ARRIs.

 

1 = Ground

 

2 = +24 vdc (be careful, on Arricams this is NOT regulated below 32 volts, so it depends on what the battery is feeding the camera)

 

3 = Remote Start/Stop [momentary] (also output for shutter pulse when camera runs)

 

 

 

Hope this helps,

Matt

[Fred Davis]

Now i need the 3-pin config from Arri

 

Assuming you are talking about the small "RS" port on the 24 volt ARRIs.

 

1 = Ground

2 = +24 vdc (be careful, on Arricams this is NOT regulated below 32 volts, so it depends on what the battery is feeding the camera)

3 = Remote Start/Stop [momentary] (also output for shutter pulse when camera runs)

 

Hope this helps,

Matt

 

I confirm Matt's post/ those are the correct contact assignments on the FISCHER P/N S102A 052 -130+ (3-pin).

As U can imagine, I have alot os information about pin assignments, and I urge U to contact me with any questions.