Camera Truck Dock

[Alfeo Dixon SOC]

Hi All,

 

Looking for a good and safe solution to hang the rig in the camera truck for transport. I know the case is the best option, but wanted to look for other solutions.

 

thanks

 

-Alfeo

[Lawrence Karman]

Hi All,

 

Looking for a good and safe solution to hang the rig in the camera truck for transport. I know the case is the best option, but wanted to look for other solutions.

 

thanks

 

-Alfeo

 

 

I use a 4" thick foam "bed" with a cut-out that fits the rig. I just lay it down on a shelf with a shot bag across the post to keep it from bouncing out.

[Louis Puli SOC]

Hi All,

 

Looking for a good and safe solution to hang the rig in the camera truck for transport. I know the case is the best option, but wanted to look for other solutions.

 

thanks

 

-Alfeo

Hi Alfeo

I made up this case when I was on a long series.On rap I would just put the rig as is in case ,close the side and the 2nd AC would put it in the camera truck .Its made from plywood and velcro and has foam all over .Saves time at both ends of the day .Works well.

Good luck

Louis from down under B)

[denis moran]

I've never actually seen one of these on a show but I own a few things from Mike and love his work.

 

http://meinardus.com/sdcm/index.html

 

 

Denis Moran

[AaronPazanti]

Hi All,

 

Looking for a good and safe solution to hang the rig in the camera truck for transport. I know the case is the best option, but wanted to look for other solutions.

 

thanks

 

-Alfeo

[AaronPazanti]

I've never actually seen one of these on a show but I own a few things from Mike and love his work.

 

http://meinardus.com/sdcm/index.html

 

 

Denis Moran

[Eric Fletcher S.O.C.]

I use a 4" thick foam "bed" with a cut-out that fits the rig. I just lay it down on a shelf with a shot bag across the post to keep it from bouncing out.

 

Where did you get the foam?

 

Thanks

[nick franco]

Where did you get the foam?

 

Thanks

Give these guys a try, lots of good stuff.

http://www.foammart.com/foammarthome.html

[Eric Fletcher S.O.C.]

Give these guys a try, lots of good stuff. http://www.foammart.com/foammarthome.html

 

 

Thanks!

[Lawrence Karman]

I use a 4" thick foam "bed" with a cut-out that fits the rig. I just lay it down on a shelf with a shot bag across the post to keep it from bouncing out.

 

Where did you get the foam?

 

Thanks

 

It was a large piece of set dressing foam from some show (free). I cut pieces and glued it to the top to fit around the rig. I think you can purchse foam at Diamond fabrics/foam on LaBrea just N of Wilshire.