Grayson Austin

Motor is sold. Thanks. Grayson Grant Austin, SOC

Rig is sold. Thanks. Grayson Grant Austin, SOC

One package sold. One still available due to a sale falling through. Email me at: graysonaustin@me.com

Anything worth mentioning at Cinegear this year? Grayson Grant Austin, SOC

I don't even need to see a demo of the HD PDL to know how good it will be if Greg designed it. I'm in for one. My original PDL was always great. Put me on the "buy it" list Greg. Grayson Grant Austin, SOC

Will post some photos of it on the other monitors this weekend. Grayson Grant Austin, SOC

This is a great piece of kit. Highly recommended. It can also be used equally well on a SmallHD High Bright or any other monitor that has a 1/4-20 thread on top (or bottom if you use a yoke mount). Once flush, it only needs one screw to secure it onto your monitor. Two come with for the Cinetronic which it fits onto perfectly. Level vial pivots for correct positioning for level and then locks into place. One of my favorite little gadgets in quite awhile. A physical spirit level is something you should have on your rig. It never needs power and is always there in case your digital level freaks out or dies. Nicely done. Grayson Grant Austin, SOC

Their video shows quite a bit of lag from the time the wheels are moved till the camera moves. The PLC demo shows almost zero lag in their demo video. Big difference for operating precisely. Grayson Grant Austin, SOC

Paralinx Arrow + 1:3 wireless video transmitter/receiver systems for sale (two complete systems). Both systems have one transmitter and three paired receivers. One system is as new/unused. The other is barely used. Both work great and always beat out my Teradek Bolt in range time after time. One of the systems has a Paralinx Crossbow HD-SDI to HDMI converter (see photo). The other has a Paralinx shield for the transmitter. Each system has a SmallHD AC7 HD-SDI version monitor complete with IKAN director's monitor mount bracket for monitor and receiver. Each system has lots and lots of spare cables for power for each component. Each system comes with a Blackmagic HDMI to HD-SDI rugged converter with built in battery. Each monitor comes with a SmallHD sunhood. Each monitor bracket has a baby pin receiver on the bottom to be mounted on a stand when not being used handheld. The system with the Shield comes with a Decimator Down/Up Cross Converter. Special made cables for Arri two pin power and P tap power. These are both complete systems ready to work as Wireless Video systems. Send video to your focus puller, Director and DP at the same time. Buy both systems together for a complete two camera wireless video system. Each system is easily worth more than $4500 with all the bits and cables. Selling each system for $3500. Buy both systems for $6000. I'm not splitting up components in the systems at the moment. Email only please: graysonaustin@me.com Grayson Grant Austin, SOC

I've been asked if the rig and monitor could be sold separately. The answer is yes. Selling rig by itself for $19,000. Selling Cinetronic monitor with Cinetronic level and cables for $3500. Buy the full package as described above for $22,000 (I lowered the package price to make this a really great deal). Again, almost $29,000 worth of gear, most everything as new/unused for a fantastic price. Email Only Please. Also, please no window shopping. If you aren't prepared to buy now or don't have your finances in order, don't email. Grayson Grant Austin, SOC graysonaustin@me.com

Yes, Thumbscrew removes each individual battery plate (see photo) and PRO would probably exchange them for Anton Bauer mount versions since they have never been used but that would be totally on the buyer to ask about and take care of, however with the whole Anton Bauer thing lately and changes to battery cases over the years that do not center the batteries, I don't know why anyone uses the Anton Bauer mount anymore. They also have a lot of slop in them which causes vibration. Stopped using Anton Bauer mounts years ago. Please email with any other questions though. I don't always check the forum on a regualr basis. Thanks. Grayson Grant Austin, SOC graysonaustin@me.com

PM sent to you Zeb.

For Sale is a beautiful PRO Rig that is fully upgraded for HD and has the new PRO post connectors. Most parts are as new/unused. This was an additional rig that I now don't need. Here is a list of the basics: * New/Unused PRO Donkey Box 2 (new version). *(2) New/Unused PRO long dovetail camera plates. *New Unused XCS Camera Dovetail Plate. *Choice of PRO or XCS Preston MDR mount, both new/unused. *PRO Upper Junction box (fully rewired for HD with PRO quick disconnect from post). *New/Unused PRO telescoping centerpost with PRO HD centerpost cable. *New/Unused PRO Gimbal with Handgrip Sleeve and Kipp Handle clamp. *Spare standard PRO Gimbal Collar. *PRO Lower Electronics Housing (fully rewired for HD as well). *New/Unused PRO Battery Rack 3 with IDX V Mounts plates. *(4) PRO Jumper Blocks. *New/Unused Cinetronic Monitor Mount/Post clamp assembly (complete). *New/Unused Cinetronic Monitor Yoke. *New/Unused Cinetronic Gen2 HD Monitor. *New/Unused Cinetronic Level Sensor. *New/Unused Cinetronic Level mount for PRO lower electronics housing. *New/Unused Cinetronic Level Sensor cables (3). *PRO 8 pin lemo Monitor Power Cable. *PRO Camera power cables Arri 24Volt (2), Panavision (2), Red (2).\ *PRO Gimbal Wrench, Post Wrench. *Docking Ring for Jerry Hill Gorelock. *Other Misc parts. *Shipping Case. Almost $29,000 worth if purchased new. Selling for $23,000. Serious Only. Email Only to: graysonaustin@me.com

Now that I have had a chance to look at the video on something bigger than my phone, I see the bracketry. Easy enough. The dual monitors. Easy enough. There is another person operating the Movi it seems and it looks like he is doing it with a set of wheels. Awesome. Is that custom? Its what Movi should offer anyway. A way to operate the head from a traditional set of remote style wheels instead of a joystick. A joystick is great for a gimbal mount so the steadicam op can do it all himself but for two man operating, wheels would be a great option. I'm looking forward to a bigger payload for the Movi. 15 to 20 lbs would be great. Grayson Grant Austin, SOC

I'm more interested in the articulating armature that connected the Movi to Larry's rig than I am in the Movi itself. There will be better versions of Movi type stabilizers but connecting them to the rig in a useful way is what I want to know about. Whats the story there? Grayson Grant Austin, SOC

Sale pending.

Sale pending.

I have for sale a Transvideo HD Cinemonitor Superbright for sale. It has been my main monitor and has never given me a minute of trouble. It has the Avenger level built in as well as all the other standard features of this monitor. It is very well taken care of and has been protected by a rubberized, textured material that I keep on it (the grey material in the photos). Also comes with the 1/4-20 slide mount on the bottom and an additional one for the back. Can be used with various yoke mounts as well as I did but I am not selling one with. New from Transvideo this monitor is $4150 US. Selling mine for $2100 US. Email only to: graysonaustin@me.com

Bump for the XCS Ultimate gimbal. Can also be purchased with the XCS centerpost I have listed with XCS mounts for a savings. Selling as new unused gimbal with right handed ergo handle and regular handle for $6000. Email only to: graysonaustin@me.com

Price reduced. Get a great deal on an XCS 2 inch custom length centerpost. 26 to 40 inches. XCS mounts. If you have a standard XCS rig post and want a little bit longer without getting a super post, this is it. I also still have for sale an unused as new XCS Ultimate gimbal for sale that can be purchased with this centerpost. I will make the deal even better for anyone who buys them together. Reduced price for centerpost: $2000 Email only to: graysonaustin@me.com

Reduced. Huge savings and no wait time for an as new Cinetronic Gen 2 setup. All the gear above included. New price for all: $6000 US. I'm still in Los Angeles for anyone there who wants a quick sale. Email only to: graysonaustin@me.com

Sold. Thanks. Grayson Grant Austin, SOC

Hello all, I've got a Heden 26VE digital motor in great shape for sale. Selling for $1800. This motor will work with all the popular lens controls. Preston, Cmotion, Digital Bartech, etc. Comes with a set of gears and 15mm rod spacer and a standard preston motor cable. I will put up some photos tomorrow when I get to set. Email only please. Grayson Grant Austin, SOC graysonaustin@me.com

Lots of interested and several who didn't have their funds in place. Price reduced for Unused XCS Ultimate 2 inch gimbal and right handed Ergo handle. New Price: $6000 I won't be reducing the price any further. If you ever wanted to own an XCS gimbal and want to save some serious money, now is your chance. If it doesn't sell, it will become a backup gimbal for me. Email only. I'm in Los Angeles still for a few more weeks for any of the locals. Thanks. Grayson Grant Austin, SOC graysonaustin@me.com

Wide version of this plate has sold. Sale of the other one fell through so I still have one available for sale. Price reduced for quick sale while I'm here in California. Selling now for $300. Email me at: graysonaustin@me.com