Osvaldo Silvera SOC

Marshall HD/SDI Monitor $799 shipped in the US Paypal requires 3% additional.

$899 for the Sunday night birds. Paypal requires 3% additional. Shipped in the continental US.

The lower base is a Pro lite, not the Pro 2. More desirable in my opinion for a lightweight full size sled. I have the same sled but full HD, and with a different monitor. Flies excellent! Good luck on the sale, it's a sweet rig and can be upgraded to HD

I just saw this......no spirits for you...one year! I saw the title and was like...hmmm.... You guys are having way too much fun up there. Ozzie

Hi folks, helping out some folks to put together a system and I need leads on 1 or 2 Bartech/M-one or Heden Upright motor systems/kits. Analog systems at this time. Message me what you have and price please, thanks. Ozzie

take a look at the picture on the site, Looks like maybe double the length of the stick and a couple times wide...and then a bit more. ( that's a scientific term). I got it, just cause it will help broaden the camera signals I can feed it., No word yet on whether it passes the Audio thru it with this HD/SDI set up. Without it, and just using the HDMI out of a camera, the Audio does flow thru and you can plug in headphones on the receiver monitor if it's so equipped with a headphone jack. Hoping the same applies with the Crossbow. I'll see next week when I receive it and report back. Ozzie

Thanks for the link and news Libor. Just placed the order. Bummed they used the 2.1 connector for the power, but at least I already have several different power cables for that from my Decimator 2's

BTTT

Hi there folks. Just a little something to be on the lookout for. on Friday July 5th while working on a show in Miami at Greenwich Studios. 2 of my Anton Bauer HC Lithium batteries were stolen. Production replaced them right away with new ones, but I wanted to post the info here. One had Silvera poorly scratched into the underside (post side) and the other did not. Anton Bauer Lithium HC Serial # 10469W07S & #25927Z03S I waited to post this until the show stage was dismantled incase someone just grabbed them and tossed them under the stage just to be a dick, but nothing was found in the teardown. First time I had any gear stolen, Glad Production stepped up and I had 2 new ones by the next weeks taping. Ozzie

If they were Anton Bauer HC batts, take a look. 2 were stolen from me while shooting LaVoz kids at Greenwich Studios in North Miami 2 months ago. One had Silvera scratched into the post side and the other did not. Anton Bauer Lithium HC Serial # 10469W07S & #25927Z03S

BTTT, Anyone have anything cool to trade? Cinetronic 1? 4x5.650 Arri Clip on 2 stage Mattebox? ????

BTTT

Marshall HD/SDI Monitor still available $850 shipped in the continental US.

Hi there Tom, I believe you might find the answer and more help on a Glidecam forum, or other smaller stabilizer forum. the majority of the operators on here have bigger rigs, from the Zephyr from Tiffen to the XCS Ultimate and Pro Gen 3 and 4 HD sleds. I would venture to say a competent machinist would be able to look at your top stage and align anything you may need to be aligned or fixed. best of luck, Ozzie

Yes John shot this.

Price Drop... Without the Tally Cables......$4400. Same Paypal and Shipping as outlined above in Original AD.

Where was the spotter! And why wasnt he in DonJuan if he didnt have a spotter.

Just looked at the Ad in the current issue of ICG for Cinetronic on page 81, it's a Cinetronic Ad, but the Monitor is mounted on a Sachtler Yoke. What Yoke is this?

I got mine last week and used it all this week on an Award show, it's absolutely great!, Super stiff, and the monitor is still adjustable, stays where you put it, ...AND I RUN during one of these live award shows, never had to re adjust the monitor during the show. It just works! Pic below shows it with a Transvideo HD6 SBL (Blue Knob) on an XCS 2" post,

Just got the Matthias Bracket, and yoke for my Transvideo HD6, AMAZING!!!!!!!!!!!! I believe it's http://www.cam-jam.de/ Just my opinion.

Pics as requested

I am selling the GPI PRO Cinema HD Upper and Lower Junction Boxes. Will only be sold as a set. They are the Cinema HD (formally HD-Upgrade) electronics housings. These Have the Tally Option . And the Lower electronics housing has 12 volt out on the recorder lemo, instead of the 5v or 9v of the past. I use this to feed SD video and power a program monitor for live broadcast shows. I will include a Tally cable for the top that I had Terry custom make that has the sensor, as well as two other LED lights op top, so you can tape the sensor to the camera, and tape an LED to the top or bottom of your Lens shade/Mattebox, and have another LED to place on the side of the camera facing you while you operate so if your looking up when your camera goes live, you can react faster. At the bottom is a Cable that has a 90 deg Lemo for the bottom of the sled and a Bright LED you can tape or Velcro to the top of your monitor. Both Housings are in perfect working order. Condition is like new. You can purchase an HD Center Post cable from PRO for $665 and you're good to go. Pro sells the Cinema HD set for $5165 + $800 for Tally Option, Terry charged $250 to make the top and bottom Tally Cables, So we're talking $6215 plus shipping. Price for everything is $4700 and is available for immediate shipping. Located in Miami, prefer local sale. Will ship international at buyer's expense. I accept cash. I can also accept a credit card/PayPal payment with a 3% transaction fee. If you have any questions, please don't hesitate to ask. Email me off the forum for a faster reply. Ozzie@silverafilm.com

BTTT

$999 includes shipping. Paypal accepted with a 3% fee added.

XCS Bracket sold. Marshall HD/SDI monitor still available. $900 shipped.