Joe Bullen

£5500.00 ($8293.00) plus shipping to your location. London based at present.

Fully rebuilt and checked by Optical Support of London after one spring snapped in the upper section. This section now has a replacement second-hand spring, and all the cables and pulleys have been replaced with undamaged second-hand parts. The elbows have been inspected and there are no cracks. The socket block is new from Tiffen and made of steel. Includes two spiral arm posts- standard length and twelve inch. Diameter is .510 inches. Please check this is right for your gimbal handle.

I'm selling as I have now got a Pro-arm.

Max rated load 63lbs (68ilbs detuned). Min approx: 40lbs. Also comes with spare upper arm bone.

Inspection encouraged prior to purchase- if possible. Ideal as a back-up or for someone starting out.

This arm has really been looked after and serviced regularly in the UK. All removable joints and bearings striped out and replaced approximately 3 years ago by Brian Bees of Moys UK.

Please email me on joe@joebullensteadicam.com should you have any queries.

Thanks for looking.

Dear Forum,

I'm selling my master series arm as I'm upgrading to a pro.

It's been exceptionally well looked after and has two new top arm bones. The rest of the arm has been re- anodised and fully serviced by Brian Bees of Moys Engineering UK. All bearings were replaced as well. Flys beautifully, and the adjusters are really easy on the fingers! Foamed Peli gun case included, also used.

Max load flown 70lb for 3D set-up. Arm was more than comfortable.

The arm was purchased second-hand from an operator in Greece, who many of us may know through the forum or the Facebook group: Stefanos K. Between the two of us- this arm has been very well looked after and maintained.

£5000.00 plus shipping to your location. Paypal preferred. Please email or call should you have any queries: joe@joebullensteadicam.com, or call on the number below.

Photos on request, as the forum does not accept any of reasonable quality.

Thank-you for looking, and I wish you all a great Holiday,

Dear All,

Posting on this thread roughly six months after the last comment. Please accept my apologies if this has been answered elsewhere on the site but, what is the current thinking about the best baseplate for the Alexa at the start of 2014? In the market for one and wondered what people now thought was the best?

Kind Regards,

Joe Bullen

joebullensteadicam.com

As above. Please email joe@joebullensteadicam.com in the first instance. Thanks for looking.

Master series arm section for sale. Second hand- used. Re-anodised- £30.00 plus shipping. Replaced as other section had broken and wanted new matching sections. Solid and perfectly usable. Swapped out by Brian Busby of Moys on 16th July 2013.

Please contact Joe in the first instance on joe@joebullensteadicam.com or +44 7791 212263.

Thanks for looking.

Master series arm section for sale. Second hand- used. Re-anodised- £100.00 plus shipping. Replaced as other section had broken and wanted new matching sections. Solid and perfectly usable. Swapped out by Brian Busby of Moys on 16th July 2013.

Please contact Joe in the first instance on joe@joebullensteadicam.com or +44 7791 212263.

Thanks for looking.

Some parts form my MK/V Evolution that are no longer needed.

x2 sets of cross braces for an evolution cage, (with rubber feet as they were taken off the bottom of the cage)

J box baseplate.

Any offers plus shipping considered. Also spare strap from my old Walter Klassen vest. Unused and with brass rivets.

Please email me joe@joebullensteadicam.com in the first instance. Thanks for looking.

Bought for £300.00 in 2007. Very rarely use it now so thought I would give it a good home. A few minor scratches from being in a case with a k clamp but that's it- as good as new.

Blue anodized Machined steel with internal rubber pads to protect the camera handle. Screws captive on one side but can be undone. Takes seconds to attach to a standard Steadicam plate. Comes with the usual caveats about over tightening on a camcorder handle. Go easy!

£150.00 + shipping.

Please call Joe on +44 7791212263 or email joe@joebullensteadicam.com in the first instance.

Thanks for looking.

Selling due to upgrade. Excellent Condition. Specs below taken form the Marell website;


Housed in rugged shock resistant CNC machined aluminum housings with whip and flat antennas provided as standard. 1.394 GHz, W.T. Licence Exempt. Colour composite video. PAL/NTSC/SECAM.

The system provides solid pictures with minimal break-up, multiple channels (UK approved for use on 1.394Hz(1chan) and 2.4GHz(4chan)). Long operating range, High Gain Antennas, Omni-directional, Excellent reliability record, Safe to use.

The kit is supplied ready for immediate use in a tough rugged and lightweight Pelicase. Lamintaed instruction sheet and box contents list included. Lemo Power in on both devices.

Some velcro is still stuck onto the metal cases- but the anodising is in very good condition. Both units were fully serviced by Marell just before Christmas 2011. The kit was bought second-hand in the UK in 2007. The price then was £1200.00 plus VAT.

I really look after my gear so this unit is a good choice for someone starting out or as a back-up.

£600.00 plus shipping. Paypal accepted. Any questions? Please email joe@joebullensteadicam.com or call +44 7791 212263 in the first instance.

Thanks for looking.

Happy NY to you all. Hope your holiday was a peaceful one.

Selling due to upgrade. Excellent Condition. Specs below taken form the Marell website;

Housed in rugged shock resistant CNC machined aluminum housings with whip and flat antennas provided as standard. 1.394 GHz, W.T. Licence Exempt. Colour composite video. PAL/NTSC/SECAM.

The system provides solid pictures with minimal break-up, multiple channels (UK approved for use on 1.394Hz(1chan) and 2.4GHz(4chan)). Long operating range, High Gain Antennas, Omni-directional, Excellent reliability record, Safe to use.

The kit is supplied ready for immediate use in a tough rugged and lightweight Pelicase. Lamintaed instruction sheet and box contents list included.

Some velcro is still stuck onto the metal cases- but the anodising is in very good condition. Both units were fully serviced by Marell just before Christmas 2011. The kit was bought second-hand in the UK in 2007. The price then was £1200.00 plus VAT.

I really look after my gear so this unit is a good choice for someone starting out or as a back-up.

£600.00 plus shipping. Paypal accepted. Any questions? Please email joe@joebullensteadicam.com or call +44 7791 212263 in the first instance.

Thanks for looking.

Grip-track for a standard Steadiacm sliding baseplate for sale. New and unused. Made from brass by Bees engineering UK.

Any questions please call Joe on +44 (0) 7791 212263 or email joe@joebullensteadicam.com in the first instance.

£25.00 plus £2.00 delivery in UK- about £40.00 new... Comes with three tiny countersunk screws to secure the track to the topstage plate.

Thanks for looking.

15mm camera matte box bars. New and unused. 320mm in length. Bought for Steadicam use, but not needed. Fully dressed and and finished- totally smooth.

£69.00 pounds with VAT and shipping from Moys Engineering, Hatfield, UK.

£45.00 plus £3.00 shipping to you in the UK. Happy to ship abroad- please ask for a quote.

Any questions please call Joe on + 44(0) 7791212263 or visit my site www.joebullensteadicam.com.

Thanks for looking.

Sold. Thankyou.

We've all been there; getting to a shoot and there is no way to record sound without 2 XLR's going into the camera. Rather than use XLR's that are too stiff, I came across these two, (one with brown boots and one with red to help distinguish channels visually). They are made from very soft Canford cable, and so exert a relavively small amount of twist on the gimbal. You need to get them into a long loop from the back of the camera to your vest shoulder. Not perfect by any means; but can work out OK if you are stuck.

Red length 127cm and brown 141cm.

£40.00 the pair plus shipping to anywhare in the world

Please email joe@joebullensteadicam in the first instance or call +44 (0) 7791212263.

Thanks for looking.

This has served me well over the years; a handy 'get out of jail card' if my rig or my video assist required power from V locks. Having a major reorganisation now so this no longer required. A bit scratched on the V-lock side but perfectly functional. A life, (shoot) saver!

£50.00 plus shipping to anywhere in the world, (approx £180.00 without XLR when new).

Please email joe@joebullensteadicam.com or call +44 (0) 7791212263 in the first instance.

Thanks for looking

MK/V J box bracket for the original evolution top-stage, (not the deluxe). Secured with three allen bolts onto the top stage front bars.There are mounting holes for the J box between these screws, (see pictures) Any offers considered. Please email joe@joebullensteadicam.com in the first instance or call + (44) 7791212263.

Thanks for looking.

MK/V cable marked video assist. Lemo 4 pin one end- 12 pin Hirose at the other. Bought as part of a cable pack from them but never used. Over 1ft long measured from the end of each cable boot. Please email Joe in the first instance: joe@joebullensteadicam.com or call +44 (0) 7791212263. £40.00 plus shipping to anywhere in world. Paypal accepted.

Thanks for looking.

Mk/V Monitor cable for sale, (power and video). Originally bought as part of an evolution rig for the original evolution monitor. Two Lemos either end, one at ninety degrees. Eight pins either end, (seven round the outside- one in the centre). Approx 4ft long, measured from the end of each cable boot.

£40.00 plus shiiping anywhere in world. Approx £90.00 when new.Paypal accepted. Please email joe@joebullensteadicam.com in the first instance or call +44 (0) 7791212263.

Thanks for looking.

Dear All,

Thanks for looking- but I have withdrawn the top-stage from sale as there appears to be a problem with it. It wouldn't be fair to sell it when there appears to be a vibration problem with it...

Best Wishes to you all for Christmas and New Year,

Kind Regards,

Joe.

www.joebullensteadicam.com.

Selling as I am upgrading to a Betz top-stage which has a tilt section.

Originally priced at £2300.00 approx. Selling for £1000.00 plus shipping- to anywhere in the world. No Dovetail plate included, but four allen screws for post mounting are. Some minor scratches from standard use- but other wise in very good condition. I have owned this stage for about eight months when it was bought from new. Although a copy of an existing deisgn on the market- the locking mechanism is exceptional.

Please see photos. If interested please contact

x4 cable safety ties, (largest two rated at 16kn) ideal for vehicle tie-offs but could also to hold rolls of tape.

x1 one carry strap from a Pelicube 1610, (unused and can be used for any sort of bag I guess). The carabiners at either end look pretty heavy duty....

x1 'Doughty' Scaffoling clamp, (rated 750kg) also good for vehicle/ Garfield mounts etc; I use the other one I own as an umbrella clamp for my docking stand! The Allen bolt can that holds them together in the middle can be adjusted so that the clamps can spin to any position relative to each other.

Any reasonable offers considered with shipping- just need to get rid! Please email Joe@joebullensteadicam.com in the first instance,

Thanks for looking.

Dear All,

Last week I had a bit of a clear-out and thought I had got rid of all the bits I needed to. Unfortunately one sale didn't go through, and I have upgraded my docking stand so I'm putting the last few bits up here.

Any resonable offers considered with shipping. Any questions, or to buy- please email joe@joebullensteadicam.com in the first instance.

1/ MK-V bar work off the back of a monitor. This is all modular so can be broken down into any configuartion required with a Ero/ metric Allen key.

2/ x3 'American' wheels off a stand adapted for Steadicam use. I'm selling these as I have now upgraded to pneumatic tyres.

3/ Mk 3 A Arm post, (shown here with a Hill handle- also for sale).

Please see shots below, thanks for looking,

Kind Regards,

Joe

Dear All,

Thank-you for taking the time to look at this advert.

All the items have been sold as of todays date on this reply,

Best Wishes to you all,

Regards,

Joe.

www.joebullensteadicam.com

Dear All,

Hope this finds you well and busy.

Please find attatched some shots of stuff I have been trying to sell recently. To be honest I haven't had much luck shifting them- so I'm putting them up here on an 'any reasonable offer considered' basis. I need the space in my house back!

The items are: MK-V Padded post case by Doggy Bag UK

Soft Case for Garfield mount

Padded Steadicam arm bag

Padded leather arm cover for Klassen vest arms

Arm-post for Cinema Products 3a Arm

MK-V bracket work, (screws and bars)-

which used to fly on the front of the old MK- V evolution monitor- for balance I think....

If you have any questions plese email me on joe@joebullensteadicam.com or vsit my site: www.joebullensteadicam.com where there are more shots and slightly more detailed descriptions of said items,

Best Wishes,

Kind Regards,

Joe.

Steadicam Arm post for a Cinema products 3A Arm. Worn on the edges as has been used. Any questions please call Joe on + 44 7791 212263, or email joe@joebullensteadicam.com

Thanks for looking.