Yookidoo71
-
Posts
6 -
Joined
-
Last visited
Posts posted by Yookidoo71
-
-
I'm selling off my PRO rig and associated gear. Here's a preliminary list, please feel free to email me if there is something specific you are looking for as I will be selling off my entire equipment package over the next few months. I'm happy to consider bundling various components together, drop me an email and we can discuss and I can supply pix etc.
Jeff
yookidoo71@gmail.com
PRO Gimbal - PRICE REDUCED $3000.00, Recently serviced by Jack at GPI
Old style clamp (used with a wrap grip) can be upgraded to current grips including VZ
PRO Donkey Box II - $1800.00
Ultra Vest - $1400.00
PRO Old style battery system - $500
10x Batteries in good mechanical condition but most/all must be re-celled
2x PAG-type chargers with BP-90 to PRO adapters
Anvil case for batteries and chargers -
My apologies for the delay in responses. I will address your emails today
J
-
Im selling off my PRO rig and associated gear. Heres a preliminary list, please feel free to email me if there is something specific you are looking for as I will be selling off my entire equipment package over the next few months. Im happy to consider bundling various components together, drop me an email and we can discuss and I can supply pix etc.
Jeff
yookidoo71@gmail.com
PRO Telescopic Center post - $500.00
Threaded connector on top
Bayonet style connector on bottom (can be retrofitted by pro to threaded) or I can supply a bayonet clamp for the lower j box if desired
PRO Telescopic Super post - $700.00
Threaded connector on top
Bayonet style connector on bottom (can be retrofitted by pro to threaded) or I can supply a bayonet clamp for the lower j box if desired
Includes Anvil Case
PRO upper J box - $500.00
PRO Gimbal - PRICE REDUCED $3000.00
Old style clamp (used with a wrap grip) can be upgraded to current grips including VZ
PRO Donkey Box II - $1800.00
Ultra Vest - $1700.00
PRO Old style lower j box - $500
From the original flat style PRO battery rack
Bayonet connector (possibly can be upgraded by PRO to threaded connector type)
Can be used with a Steadyrig battery hanger to allow Anton Bauer usage etc.
Toggle switch for 2 battery mode
Can be purchased seperately or with battery system below
PRO Old style battery system - $700
Rack is in great condition, never crashed
10x Batteries in good mechanical condition but ALL must be recelled
2x chargers with BP-90 to PRO adapters
Anvil case for batteries and chargers
Can be purchases seperately or with j box above
-
I’m selling off my PRO rig and associated gear. Here’s a preliminary list, please feel free to email me if there is something specific you are looking for as I will be selling off my entire equipment package over the next few months. I’m happy to consider bundling various components together, drop me an email and we can discuss and I can supply pix etc.
Jeff
yookidoo71@gmail.com
PRO Telescopic Center post - $500.00
- Threaded connector on top
- Bayonet style connector on bottom (can be retrofitted by pro to threaded) or I can supply a bayonet clamp for the lower j box if desired
PRO Telescopic Super post - $700.00
- Threaded connector on top
- Bayonet style connector on bottom (can be retrofitted by pro to threaded) or I can supply a bayonet clamp for the lower j box if desired
- Includes Anvil Case
PRO upper J box - $500.00
PRO Gimbal - $3500.00
- Old style clamp (used with a wrap grip) can be upgraded to current grips including VZ
PRO Donkey Box II - $1800.00
Ultra Vest - $1700.00
PRO Old style lower j box - $500
- From the original flat style PRO battery rack
- Bayonet connector (possibly can be upgraded by PRO to threaded connector type)
- Can be used with a Steadyrig battery hanger to allow Anton Bauer usage etc.
- Toggle switch for 2 battery mode
- Can be purchased seperately or with battery system below
PRO Old style battery system - $700
- Rack is in great condition, never crashed
- 10x Batteries in good mechanical condition but ALL must be recelled
- 2x chargers with BP-90 to PRO adapters
- Anvil case for batteries and chargers
- Can be purchases seperately or with j box above
-
SOLD....
Thanks for looking
Jeff
-
Selling a Preston system with the new HU3. Here's a rough break down of whats in the package (email for details, pix, etc)
HU3 with rings, batteries, chargers
MDR2 with transciever, power cable, USB cable, software
DM1 with cable and gears
DM2 with cable and gears
Run cables for all major camera packages
System is in excellent condition. This is an opporunity to purchase a like new system with a discounted price and zero factory lead time
$17,000 USD
Email with questions
Jeff
jeffclark42@gmail.com
-
Seling a Preston system with the new HU3. Here's a rough break down of whats in the package (email for details, pix, etc)
HU3 with rings, batteries, chargers
MDR2 with transciever, power cable, USB cable, software
DM1 with cable and gears
DM2 with cable and gears
Run cables for all major camera packages
System is in excellent condition. This is an opporunity to purchase a like new system with a discounted price and zero factory lead time
$17,500 USD
Email with questions
Jeff
jeffclark42@gmail.com
-
Seling a Preston system with the new HU3. Here's a rough break down of whats in the package (email for details, pix, etc)
HU3 with rings, batteries, chargers
MDR2 with transciever, power cable, USB cable, software
DM1 with cable and gears
DM2 with cable and gears
Run cables for all major camera packages
System is in excellent condition. This is an opporunity to purchase a like new system with a discounted price and zero factory lead time
$17,500 USD
Email with questions
Jeff
jeffclark42@gmail.com
-
-
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 OBO
http://www.jeffclarksteadicam.com/Gimbal.JPG
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
-
-
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 OBO
http://www.jeffclarksteadicam.com/Gimbal.JPG
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the threaded studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $6000.00 OBO.
http://www.jeffclarksteadicam.com/3A%20Arm.JPG
http://www.jeffclarksteadicam.com/Trunions.JPG
http://www.jeffclarksteadicam.com/Gold%20Springs.JPG
Please contact me for further information
Jeff Clark
jeffclark42@gmail.com
-
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 USD
http://www.jeffclarksteadicam.com/Gimbal.JPG
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
--------------------
Jeff L Clark, SOC
Los Angeles, CA
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the threaded studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $6000.00 USD
http://www.jeffclarksteadicam.com/3A%20Arm.JPG
http://www.jeffclarksteadicam.com/Trunions.JPG
http://www.jeffclarksteadicam.com/Gold%20Springs.JPG
Please contact me for further information
Jeff Clark
jeffclark42@gmail.com
--------------------
Jeff L Clark, SOC
Los Angeles, CA
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the threaded studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $6000.00 USD
http://www.jeffclarksteadicam.com/3A%20Arm.JPG
http://www.jeffclarksteadicam.com/Trunions.JPG
http://www.jeffclarksteadicam.com/Gold%20Springs.JPG
Please contact me for further information
Jeff Clark
jeffclark42@gmail.com
-
DONKEY BOX III for sale. Excellent condition. No plates included. $3800.00 USD
http://www.jeffclarksteadicam.com/Dbox.JPG
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 USD
http://www.jeffclarksteadicam.com/Gimbal.JPG
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the threaded studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $6000.00 USD
http://www.jeffclarksteadicam.com/3A%20Arm.JPG
http://www.jeffclarksteadicam.com/Trunions.JPG
http://www.jeffclarksteadicam.com/Gold%20Springs.JPG
Please contact me for further information
Jeff Clark
jeffclark42@gmail.com
-
DONKEY BOX III for sale. Excellent condition. No plates included. $3800.00 USD
http://www.jeffclarksteadicam.com/Dbox.JPG
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 USD
http://www.jeffclarksteadicam.com/Gimbal.JPG
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
-
DONKEY BOX III for sale. Excellent condition. No plates included. $3800.00 USD
VZ GIMBAL for sale. Excellent condition. Bearing recently cleaned. $6000.00 USD
Please contact for further information.
Jeff Clark
jeffclark42@gmail.com
http://www.jeffclarksteadicam.com/Dbox.JPG
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the threaded studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $7000.00 USD
Please contact me for further information
Jeff Clark
jeffclark42@gmail.com
http://www.jeffclarksteadicam.com/3A%20Arm.JPG
http://www.jeffclarksteadicam.com/Gold%20Springs.JPG
-
This arm has been well cared for and maintained. This is a late model arm as evidence by the heavy duty wrist piece at the base of the arm as well as the solid studs which run through the trunions. Bearings are clean, no twist in the cables or fraying. This is an excellent arm and very smooth. Includes padded arm bag and 2 piece Camera Essentials raincovers. $7500.00 USD
Please contact me for further information
Jeff Clark
jeffclark42@aol.com
-
SOLD....thanks for looking
-
This has been my backup / iris pull unit so it has very low hours and is in excellent cosmetic condition.
1x Bartech Hand Unit w/ 5 focus strips
1x Bartech Receiver/Motor Driver w/ mounting bracket and power cable
1x M-One motor
1x motor cable
6x Lens Gears (.4m/64p, .5m, .6m, 48p, .8m/32p, .8m/32p Wide)
1x 15mm rod bracket (on motor)
1x Panavision Run Cable
1x Arri 12v Run Cable (SR, BL)
1x Arri 24v Run Cable (SR3, 435, Arricam)
1x Moviecam Run Cable
1x Aaton Run Cable
Pictures
http://www.jeffclarksteadicam.com/PACKAGE.JPG
http://www.jeffclarksteadicam.com/TRANSMITTER.JPG
http://www.jeffclarksteadicam.com/RECEIVER.JPG
http://www.jeffclarksteadicam.com/MOTOR.JPG
http://www.jeffclarksteadicam.com/RUN%20CABLES.JPG
Package Price: $4300
Email jeffclark42@aol.com for further info.
PRO parts for sale - updated list
in Steadicam Marketplace - For Sale
Posted
Updated list.
Jeff
yookidoo71@gmail.com
Ultra Vest - PRICE REDUCED - $1200.00
PRO Old style battery system - PRICE REDUCED - $400
10x Batteries in good mechanical condition but most/all must be re-celled
2x PAG-type chargers with BP-90 to PRO adapters
Anvil case for batteries and chargers
PRO Gimbal - SOLD
PRO Donkey Box II - SOLD