Jameson Johnson

I posted in the previous thread as well. I contacted Tiffen and they sent me two shims of different thickness. I started with the thinner of the two and it did the trick. The lock has been much more firm now and hasn't unlocked one time since. I've had the sled loaded down pretty well too, not a problem at all.

Mike - thank you for the response. As I stated above, I appreciate how involved you are in this forum and with your customers in general. You reflect well upon the company. I will not be a customer of the extended service plan, and I think the initial advertising is misleading - in general, extended warranties cause me to question products. However, I do appreciate the willingness to help customers and plan to continue being a Teradek customer.

I agree with your assessment. I like Teradek, I like the product, and that's why I bought a Bolt Pro in the first place. IMO, they had the best combination of tech and form for the price. I've also recommended and sold clients of mine on Teradek products. What I do see so often these days are companies that take the position that they are more important to the customer than the customer is to them. I would hate to see that happen to Teradek. They have indeed released new featured, firmware, etc. They currently have several products that I am looking at purchasing, and actively developing a market base for them. Perhaps it is simply bad marketing or communication on their part on this one. And perhaps I did not give enough credit. Mike Gailing has been extremely involved in this forum alone, addressing issues publicly and head on. He represents the kind of service and support I expect from a company. This kind of service and the product experience I have had is why I would put my name behind Teradek as well. That said, we operate in an industry made up of small businesses and entrepreneurs looking to do their best in life. I do get very defensive of this group (small business) when I feel like an entity is trying to take advantage. Inwardly, if I endorse a product/company to my clients and then feel as through things may turn, it would reflect poorly on my business as well. I hope that I am wrong in this assessment, and wish them success. I intend to be a loyal customer of Teradek myself.

I own a Teradek Bolt Pro, and it works great! It does what I need it to do, when I need it to do that. I paid retail price directly from Teradek.

I just received the email about the new service extension offered by Teradek. To be honest, this makes me really question whether to buy another product from Teradek. I'll explain. For a seemingly significant amount of money, I get to extend a warranty that covers only defects for 2 years - even though the email and the tagline on the sales page says "last a lifetime." 1 or 2 years, in fact, not a lifetime. Moreover - this "offer" to cover only maufacturer defects, not accidental damage makes me question whether Teradek will actually stand by it's products. If it is in fact a "defect," as the manufacturer you should repair or fix the problem at no cost to the customer. That's what a good customer oriented company that wants to develop a long lasting, loyal customer would do. And to make a "limited time offer" to extend a defect only coverage at a price makes me think that Teradek has discovered a potential defect and is hedging against future returns, rather than deal with the problem before a project or client relationship is compromised. Why else would I be asked to pay extra for a 2-year "lifetime" defect support warranty? In short - stand by your products, and don't try to sell me on expensive coverage for a manufacturer defect! Regards, Jameson Johnson

I agree - I've had mine for a year and a half. It's been very reliable and on every live show I've done since I got it.

I have run into the same problem, but even after tightening the screw I'm not confident in the grip. It doesn't take much force to unlock the lever, and the same to lock it in place. I'll check with Tiffen for a thicker shim. Good suggestion from Evrim though.

Same here...

...Although the knee pads are a nice touch.

Hey Bryan - I'm on the show with you. I've got a Boxx Tallis system coming for you. I've used this system with live Steadi before and it works well. The tally receiver is PTap. We were initially misquoted on the remote paint capability of the camera we're using. That's why the late effort for tally.

Very excited about these new offers! Any word on ship date?

I've used the utility several times - there are no steps beyond Step 7. After you've paired, Step 7 asks you to restart once more while holding the reset button; this I believe re-enters the menu at which point you click the "confirm pair" button. I believe that click sends commands to lock in the pair and exit the menus and return to normal.

Peter - Is this the CW-5 or the CW-7? I've used the IDX wireless on jobs before, and have had problems with it taking hits in all environments. I've had good luck in a rehearsal, then bad for show. I've even had it break up in a corn field away from other 5Ghz RF, explain that.... If you do find a fix, I'm sure a lot of people will be very interested in the solution! Jameson

I've only flown the Cabrio once on a demo, but with my G-zoom I experienced the same issue - slow zoom speed for sure, but slower on the zoom out. I thought I had a problem with the controller, but like yours, it worked fine on other ENG lenses.

Mike - I haven't seen the final cut, but I had a usually picky pair of director/producer watching the feed and both said they didn't see a single dropout. I was within 200' of the receiver during the show, but in our wireless tests ahead of time, I got 500+ feet from the receiver through at least 1 layer of cinder block before it started to sparkle. I did have high gain antennas on the receiver for the show that were after market, but still provided from Boxx LA. I did test with the stock 5-way antennas, 3- 2020 and 2-205, without a problem to 300 feet. Still waiting on the line cut myself. I've got the system again on a national conference for a large financial corporation in November. Are there specific things I could test or check for you? The environment will be a 2500 seat auditorium at the Minneapolis Convention Center downtown. Lots of errant wifi in the area, but outside the range of the 5.16 that the Meridian works best in. I want to put it though it's paces next summer on a few outdoor music shows too - that's a way off though.

Not live television, but live multicam corporate. I use Boxx Meridian with the OB receiver - cuts in nicely since there's less than 1 frame delay. Generally a GV LDK8000 or GV DMC1000 (discontinued) The DMC1000 is cool for GrassValley because you can have full paint control via wifi. Grass has a new compact version of the new LDX that has ethernet paint control; plug in a wifi adaptor and you're off and flying with full telemetry and tally. I have not flown with this camera yet, but I'm anxious to. http://www.grassvalley.com/products/ldx_compact Cheers

I wonder how flexible it would be if applied to cloth...

Check out the offerings from AJA also. I use these on a regular basis and they work great. http://www.aja.com/en/category/mini-converters/

HDSDI is actually a voltage carried over the cable, not an RF signal as described, though it would be possible for other high powered transmitters nearby to introduce voltage into the cable and cause interference in your picture. However, that's not what was described. If the sound department is getting interference from you when you plug in, then it's not an issue of your gear receiving RF interference, but them getting it from you. But this is an odd situation given that your HDSDI monitor cable shouldn't have anything to do with their wireless transmitters. You mentioned you were in a TV studio - are you using a studio camera and tethered to their system or wireless? Which camera is it? What else is on your sled? Do you have any transmitters of any kind? Does sound have any devices on your rig? This one has be intrigued, so at the very least I'm curious what the solution is, but I'd love to help troubleshoot.

Maybe modularity is the answer here! If I had a universal handle that worked with all brands, I could interchange my fork head for a spoon head in 5 minutes! If I fall and break a fork off, there are plenty of other oper-eaters in the area that can lend me their fork. Much faster than running to the drawer to get a new one.

Maybe there's a cheaper, more modular brand that works with my fork. Maybe there's a brand that doesn't jiggle when I walk with it, then again it could just be my footwork.

I found out that it's very difficult to eat Jello with a fork.

Is there an English version of the website? What kind of price are we talking about?

I would ask your accountant, if you have one. An accountant would be able to advise best for your situation. I'm not sure what the exact process is, but I think you can transfer it to the LLC without a penalty. I haven't needed to transfer yet, but my accountant and I are discussing plans for a future transfer of property.

I asked them about this at NAB - they don't have official specs on it yet, but they did say they were aiming for later this year, perhaps fall for a release. I'm not sure they know the performance specs yet either, but I think they're shooting for around 600ft range? This could all change, and is pretty speculative at this point, but they're working on it. They also had a prototype for an SDI input dock, essentially. Dock the arrow TX into it, it allows HDSDI in - no loop-through at this point. And it sounds like it's going to beat the comp. for pricing - but again, speculation at this point. It was enough to sell me on the Arrow+ though.