Justin Painter

BLACK STEADICAM STAND WHEELS FOR AMERICAN GRIP STAND OR SIMILAR

THESE ARE USED BUT STILL IN GREAT CONDITION, ALL IN WORKING ORDER

I LIVE ON THE WESTSIDE IN LOS ANGELES, YOU CAN EITHER PICK THEM UP OR YOU PAY FOR SHIPPING.

$110

PAINTER4270@YAHOO.COM

SOLD!!!!!

310-283-5760

SOLD

Im selling my Antlers V2, I believe they are the newest Antlers Brant and Jerry have produced. The Antlers come with two differnt weight sets, 3 differnt size riser posts, sliding mount, and cross bar.

I have never used the Antlers so they are in perfect condition and have all the parts.

I bought the Anters in April of 07 for $915.00 Im sure they will go up in price the next time they make them.

Asking $800.00

You pay for shipping or pick up in Venice Beach Area

Im looking for a used Cine Remote Readout for a Cinetape , the wireless one! I would be open to the wired remote readout that C.E. sells too.

Thanks

Please email me directly

Hello,

 

Im working with a SR2 on Saturday and looking for a low mode adapter to rent. If you have one and want to rent it, email me painter4270@msn.com. Im in Los Angeles on the westside, shooting in Orange County on Saturday

 

thanks in advance,

 

Justin Painter

painter4270@msn.com

Found one, thanks!

Hello,

Im working with a SR2 on Saturday and looking for a low mode adapter to rent. If you have one and want to rent it, email me painter4270@msn.com. Im in Los Angeles on the westside, shooting in Orange County on Saturday

thanks in advance,

Justin Painter

painter4270@msn.com

I am looking for a Bartech Focus Device with or without a M1 motor. I am looking for a back up to my BFD. I have the M1 motor and would like the same set up. Im not needing any cables since it will be a back up/Iris for me.

 

Thanks

 

Justin Painter

Found it!

I seeking a wireless tuner! Im open to different types. I would prefer to have many powering options as the Transvideo Hermes. ( 4 pin xlr, AA batts)

 

Let me know

 

Thanks

 

Justin Painter

Found one, thanks!

I am looking for a Bartech Focus Device with or without a M1 motor. I am looking for a back up to my BFD. I have the M1 motor and would like the same set up. Im not needing any cables since it will be a back up/Iris for me.

Thanks

Justin Painter

I seeking a wireless tuner! Im open to different types. I would prefer to have many powering options as the Transvideo Hermes. ( 4 pin xlr, AA batts)

Let me know

Thanks

Justin Painter

[attachmen

=1706:steadicam_181.jpg]

 

Anton Bauer Interactive 2000 Dual charger and power supply with 4.2 software which will charge Dionics, Hytrons and every other Anton Bauer battery. Im pretty sure this is the latest software. The Charger DOESNT have the discharge module (DDM). I am also selling a hard to find Xm 2002 Dual charger that work with the Anton Bauer Dual. The XM will not charge Dionics or Hytrons but will charge propacs, trimpacs, proformers ect.. Both items are in perfect condition!!!

 

$1150 for both

 

Thanks

Justin Painter

Painter4270@msn.com

 

 

New Price!!! Anton Bauer Dual $650.00 plus shipping Anton Bauer XM two Bank Charger $300 plus shipping

 

XM is SOLD! THE DUAL IS STILL FOR SALE!!! $650 OBO

Both items are for sale on ebay! ebay item number: 220153747778

Marell HBM-5M used once! I bought a HBM-5m in May of last year, used it as my main monitor all year. The monitor is great, it has a frame lines and cross hair. I sent it back to Marell for a software up grade and in which they upgraded and sent it back to me in less than a week.

Anyway the monitor was damaged in shipping on the way back to me, so Dave Ellis over nighted me a brand new one. I offered to send the new one back after my shoot, but he told me just to keep the new one. A week later I found a TB6 for a great price, so now the brand new HBM-5m is sitting and looking for a new home. Its in perfect condition even smells new!!!!

 

I cant say enough about the customer service at Marell, the BEST!

 

Check out the specs on the website listed!

 

http://www.marell.co.uk/monitors/HBM-5M/

 

It comes with the CP spigot you will need a kip handle, I needed it for my TB6. http://www.marell.co.uk/mounts/MT-MK3/

 

To buy the monitor from Marrel it would be $3980.00 (1975.00 pounds) plus $54.00 (27.00 pounds) for the spigot. Total $4034.00 plus shipping from the UK.

 

$3500 OBO plus shipping

Justin Painter

painter4270@msn.com

310-283-5760

 

 

 

Still for sale!!!!

SOLD!!!!

Marell HBM-5M used once! I bought a HBM-5m in May of last year, used it as my main monitor all year. The monitor is great, it has a frame lines and cross hair. I sent it back to Marell for a software up grade and in which they upgraded and sent it back to me in less than a week.

Anyway the monitor was damaged in shipping on the way back to me, so Dave Ellis over nighted me a brand new one. I offered to send the new one back after my shoot, but he told me just to keep the new one. A week later I found a TB6 for a great price, so now the brand new HBM-5m is sitting and looking for a new home. Its in perfect condition even smells new!!!!

 

I cant say enough about the customer service at Marell, the BEST!

 

Check out the specs on the website listed!

 

http://www.marell.co.uk/monitors/HBM-5M/

 

It comes with the CP spigot you will need a kip handle, I needed it for my TB6. http://www.marell.co.uk/mounts/MT-MK3/

 

To buy the monitor from Marrel it would be $3980.00 (1975.00 pounds) plus $54.00 (27.00 pounds) for the spigot. Total $4034.00 plus shipping from the UK.

 

$3500 OBO plus shipping

Justin Painter

painter4270@msn.com

310-283-5760

 

Still for sale!!!!

Im looking for a two inch docking bracket for my magliner.

still looking

Marell HBM-5M used once! I bought a HBM-5m in May of last year, used it as my main monitor all year. The monitor is great, it has a frame lines and cross hair. I sent it back to Marell for a software up grade and in which they upgraded and sent it back to me in less than a week.

Anyway the monitor was damaged in shipping on the way back to me, so Dave Ellis over nighted me a brand new one. I offered to send the new one back after my shoot, but he told me just to keep the new one. A week later I found a TB6 for a great price, so now the brand new HBM-5m is sitting and looking for a new home. Its in perfect condition even smells new!!!!

I cant say enough about the customer service at Marell, the BEST!

Check out the specs on the website listed!

http://www.marell.co.uk/monitors/HBM-5M/

It comes with the CP spigot you will need a kip handle, I needed it for my TB6. http://www.marell.co.uk/mounts/MT-MK3/

To buy the monitor from Marrel it would be $3980.00 (1975.00 pounds) plus $54.00 (27.00 pounds) for the spigot. Total $4034.00 plus shipping from the UK.

$3500 OBO plus shipping

Justin Painter

painter4270@msn.com

310-283-5760

[attachmen

=1706:steadicam_181.jpg]

 

Anton Bauer Interactive 2000 Dual charger and power supply with 4.2 software which will charge Dionics, Hytrons and every other Anton Bauer battery. Im pretty sure this is the latest software. The Charger DOESNT have the discharge module (DDM). I am also selling a hard to find Xm 2002 Dual charger that work with the Anton Bauer Dual. The XM will not charge Dionics or Hytrons but will charge propacs, trimpacs, proformers ect.. Both items are in perfect condition!!!

 

$1150 for both

 

Thanks

Justin Painter

Painter4270@msn.com

 

 

New Price!!! Anton Bauer Dual $650.00 plus shipping Anton Bauer XM two Bank Charger $300 plus shipping

XM is SOLD! THE DUAL IS STILL FOR SALE!!! $650 OBO

[attachmen

=1706:steadicam_181.jpg]

 

Anton Bauer Interactive 2000 Dual charger and power supply with 4.2 software which will charge Dionics, Hytrons and every other Anton Bauer battery. Im pretty sure this is the latest software. The Charger DOESNT have the discharge module (DDM). I am also selling a hard to find Xm 2002 Dual charger that work with the Anton Bauer Dual. The XM will not charge Dionics or Hytrons but will charge propacs, trimpacs, proformers ect.. Both items are in perfect condition!!!

 

$1150 for both

 

Thanks

Justin Painter

Painter4270@msn.com

New Price!!! Anton Bauer Dual $650.00 plus shipping Anton Bauer XM two Bank Charger $300 plus shipping

[attachmen

=1706:steadicam_181.jpg]

Anton Bauer Interactive 2000 Dual charger and power supply with 4.2 software which will charge Dionics, Hytrons and every other Anton Bauer battery. Im pretty sure this is the latest software. The Charger DOESNT have the discharge module (DDM). I am also selling a hard to find Xm 2002 Dual charger that work with the Anton Bauer Dual. The XM will not charge Dionics or Hytrons but will charge propacs, trimpacs, proformers ect.. Both items are in perfect condition!!!

$1150 for both

Thanks

Justin Painter

Painter4270@msn.com

Im looking for a two inch docking bracket for my magliner.

Looking for a Modulus in good condition!

thanks

Justin Painter

310-283-5760

http://www.marell.co.uk/

Hi guys!!!

I bought two new highbright marell monitors and they are really good.Very similar to PRO or TB6,green screen,frame liner,fade borders...etc.But the price is 5 times cheaper than PRO or TB6.

best regards.Juan M.Ramos

 

Hi Juan, can you tell me where i can find a Marrell dealer?

I have tried to look a suplier up on line with no success...

thanks,

henwa

 

Anton Bauer XM 2004 Expansion Charger.

This will work with Anton Bauer 2701,2702,2722 that have the serial port. It will charger nicad and hytrons but will not charge dionics. The charger is in great condition, has engraving of the original owner on the bottom.

Please call Anton Bauer to see if this will work for you before you buy.

 

$500, plus US Priority Post Shipping

 

Thanks,

 

Justin Painter

310-283-5760

SOLD!!!!!!

Anton Bauer XM 2004 Expansion Charger.

This will work with Anton Bauer 2701,2702,2722 that have the serial port. It will charger nicad and hytrons but will not charge dionics. The charger is in great condition, has engraving of the original owner on the bottom.

Please call Anton Bauer to see if this will work for you before you buy.

$500, plus US Priority Post Shipping

Thanks,

Justin Painter

310-283-5760

Looking for a xcs ergo handle!

thanks,

Justin Painter

painter4270@msn.com

Looking for a used Murphy Cart!!!!!!

Thanks.

Justin Painter

Painter4270@msn.com

310-283-5760