-
Posts
31 -
Joined
-
Last visited
Posts posted by Milan Holec
-
-
I just complet my old rig that is ready to fly I add new pictures and it is on EBay. Rig including : top stage, 2 plates, top J-box, tool free 1,5" centre post, Gimbal, monitor bracket, bottom J- box, battery hangar A B C, power cable, wrench for centre post, docking bracket, vest fit med -large. I'm asking for the lot 5000. Plus shipping. All is function and ready to fly. You just need monitor and arm. Thank you for watching.
-
-
I like to complete my rig Pro GPI STANDART ver. (not HD) and I only need 2-generation battery hanger. Just the battery hanger. Not the lower junction box. Anybody have some for sale for affordable price? That I can have finally after couple of year's full PRO rig.
Thank you Milan
mholec@bigpond.net.au
mob:610403122343
thank you guys for offers.
I dont need it any more :) i geting Hugo Lang (Rig Engineering) baterry hanger.
-
hi,
just have question pro cables are 8 pin lemo on both sides?
thank you milan
-
This is full function Pro gear sled. It was modifying byRig Engineering to compatible SD PRO sled. All parts are full function and samesetup as PRO SD (NO HD on this sled, even one bnc is mark as HD, but is not. Itis only loop for add. Video port. Top J box is longer than orig. PRO. I was useDonkey Box III on this top J box and no problem. Bottom J box have sameconnectors setup as PRO, only have 6 pin lemo connector for power supplied frombattery. That is modifying by Rig Engineering (same power connector on steadyrig).Center post is two part tools free. Bayonet mounting for TOP and BOTTOM J boxhave tool for easy lock and unlock from center post. Monitor bracket maybe needsome modification to attach you monitor. Docking bracket is including
Gimball, Top Stage, Battery Hangar, monitor is not include.
I asking $2500 plus shipping. Anybody interested?
-
-
STILL FOR SALE :)
-
:) Hello all.
I do have three motors Heden 26 and I use only one all time another two is justsitting in case. They maybe are use 10 if most. I like to sale this two and getdigital one, which I will use, for focus and last Heden26 I will use for irisif I need to. Anybody interested to buy one or two Heden 26? Price for each$1100.00 plus shipping. email me for pictures thank you for looking.
-
I like to complete my rig Pro GPI STANDART ver. (not HD) and I only need 2-generation battery hanger. Just the battery hanger. Not the lower junction box. Anybody have some for sale for affordable price? That I can have finally after couple of year’s full PRO rig.
Thank you Milan
mholec@bigpond.net.au
mob:610403122343
-
Hi Louis
Is DIGITAL receiver same size as old one?
thank you Milan
-
Do you have any pictures please thank you Milan
-
Bump:
* 1 x Gen. II PRO Monitor with Gen. III Power Supplies: $4000
* 1 x Superpost with hardwired Upper Junction Box (with Anvil case): $800
* New Gyro Cables 24" and 5': $85 each
Thanks
Ashley
Hi can you send my some detail picture of super post please (both end amd full link picture please if you can / I'm interested )
thank you MILAN
-
To all fellow steadicam operators, and members of the steadicam forum. I have heard of devastating news from our dearest friend and colleague; Hugo Lang, whose wife has only recently past. I ask of you that you help me empathies his loss, and support him in this uneasy change. (if you'd like to contribute your feelings, feel free to write him a message as oppose to ringing him, through this rough transition of his.)
As for Hugo, my dearest friend, my family and I are here for you, to support you in any mean possible. I am sincerely sorry for your loss. Please take care, I am only a phone call or message away.
Thinking of you, Milan Holec.
-
Hi Greg
Im interesting about center post can you send my better picture please
thank you MILAN
-
Hi Luke
I'm interesting about post and i live in Brisbane mob:0403122343
thx MILAN
-
Hi Joe
do you have picture please?
ty MILAN
This is a solid 19" center post GPI made for me when I was on a show with very little low mode and the same camera all the time. Standard definition cable installed. Compatible with bayonet GPI J-boxes.
$400 plus shipping
Located in Los Angles
Joe Broderick
818.968.2805
joe@offlevel.com
-
Hello there.
I looking for any good condition gimball fit 1,5" . If anybody have one spare and want to sale let my know please. need ASAP. THANK YOU Milan: mholec@bigpond.net.au
thank you very much to all! My problem is gone :rolleyes: i do have gimball now. thank you very much for your help :D
-
Hello there.
I looking for any good condition gimball fit 1,5" . If anybody have one spare and want to sale let my know please. need ASAP. THANK YOU Milan: mholec@bigpond.net.au
-
Hello
is this vest be to big if im 33-34 size ? thank you
and what is the price?
Milan
Klassen Vest
Size L-LX built for 220lbs person 5'11" with 38" waist.
Bought as part of complete kit but not suited to my size. Should fit someone that size give or take 10lbs and 2 inches.
Comes with travel bag, pump and leather arm bag. Effectively only one owner.
Had buyer but the vest did not fit.
REASONABLE OFFERS CONSIDERED.
CONTACT KEITH AT : 00353 872 500894
-
hello can you tell me what size can fit im 32-34 thank you
milan
Still Available :)
-
Hi do you still have it? do you have any pictures please thank you
Milan
Original retro fit handsfree transporter stick for handsfree operation of latest lean steer Segways - X2 and i2. As new condition. Bought new from 'Handsfree Transporter' 6 months ago for a film project which never materialised. Used for practice only. Fully adjustable, top of the range version. Swaps over with Segway steering stick in around 5 minutes. No hard mount, as the project involved stepping on and off the Segway. Great tool, and even with fully loaded ARRICam LT it works great. Fun too - even without the Steadicam !
Cost new €2500.00. Asking €1800/£1500/$2300 + shipping.
Please email for any further info. stuhow at me dot com
Low mileage Segway X2 also available in UK (Europe possible too - email)
Thanks
-
I really didn't know Jeff personally (I only knew by reputation) but we are as big family and it is big loss we’ll miss him Please give my condolences to his daughter and his family
Milan
-
Sorry guys my faul not 4000 us but AUD AppologyHello to all.I do have Chrosziel 5" green monitor in very good working order. Have cosmetic scratch, monitor and frame line generator is in perfect working conditions. I'm very happy with this monitor, but I have now transvideo 8,4" HD monitor that's way I selling this one. If anybody interested let me know I will asking $4000 AUD, but you can make me offer is well. Thank you for looking
Kind Regards Milan Holec
-
Hello to all.
I do have Chrosziel 5" green monitor in very good working order. Have cosmetic scratch, monitor and frame line generator is in perfect working conditions. I'm very happy with this monitor, but I have now transvideo 8,4” HD monitor that’s way I selling this one. If anybody interested let me know I will asking $4000us, but you can make me offer is well. Thank you for looking
Kind Regards Milan Holec
Betz Top Stage or Pro DB-3?
in Camera Stage/Donkey Box
Posted
I'm using BD3 for 4 years now and never have any problemart all. I never try Betz that I can't say anything about it, but I believe is very good too. I'm very happy with my DB3! Good luck and have great fly with your new tops stage don't meter which one you choose. All the best :)