All Activity

Steadicam Ultra Vest (Regular) - £3,000 (no VAT) In excellent condition, light use. Some minor marks to the metal work. Pads washed regularly. Includes large socket block. Based in Chertsey, Surrey UK. Dog not included but meets welcome.

Reduced to £160

Shall we “guess the price”?

$4100

Up

For sale my spare transvideo hd6 evolution (without electronic buble) I added isides rails, now o it has 1/4 and 3/8 mounting holes 650 euro Shopping Display has no scratches

BUMP! Tiffen ExoVest still available. Asking $4,000.00 USD Thanks, Mike

BUMP - Make me an offer!

Great shape hardly used with my G-zoom unit m-one analog motor complete set $600

Innovativ Axis stand wheel kit with brakes and 2 troughs. Never used. Located in Calgary. Asking $1650. Wheels were $1800 new and troughs are $425 each new.

Please read entire post carefully before emailing with questions. No window shopping please. For sale is an absolutely pristine, turnkey Ravensclaw High Payload (rare) version of Talon Head, complete with tons of accessories, upgrades and cables: *High Payload Talon Head: This is not the standard version of Talon Head which peaks at 50 pounds of payload. This is the High Payload version from Ravensclaw (the actual manufacturer) and is rated at 75 pounds (easily) of payload and is fully stable even without the outrigger. This head has been completely redone inside and out with the brushless motor upgrade, high payload bearing upgrade, the backpan/stabilization upgrade which can be individually turned on and off for each axis, all new electronics and wiring within. This is essentially a new head. *The Control Console/Wheels: Also completely redone inside and out with updated electronics, wiring and new carbon fiber casing outside. A brand new (new style) set of wheels which are as new/unused as well as the original style wheels included. Console is Mitchell mount with a castle nut. Comes with two wheel interconnect cables. *(Two) 2 inch risers (electronic connections). *Outrigger/Side stabilizer allows for even larger builds with more extreme dynamics. *Standard (Two of them and one is new/unused) and offset camera dovetail mounts. *Arri style dovetail mount as well as a brand new (still in plastic) Wooden Camera 12 inch dovetail. *Both the original standard unkeyed mitchell as well as a brand new/unused new style keyed Mitchell mount and two castle nuts and castle nut wrenches (two of each and one castle nut and castle nut wrench are new/unused). *Long Power and Control Cables with duplicates (and more) of each (one power cable is new/unused). *Block battery adapter cables (two and one is new/unused). *A/C power supply box. *Case included. This is a very complete, turnkey two axis remote head that is absolutely bulletproof. Has all the regular Talon Head features like repeatable moves, etc. Because it has been upgraded with the backpan/stabilization feature, this head is fantastic for car mounting, Jib and crane swings and other applications. Turn on or off each axis of stabilization depending on the situation. This is why most stabilized heads have an issue when mounted to the actual vehicle being shot. A typical stabilized head wants to maintain it’s heading even when the vehicle turns. With this Talon Head, you can turn the stabilization off for pan but keep it on for the tilt axis or off all together for both axis. The brushless motor upgrade makes this head even more accurate, repeatable and quiet even at high speeds. Never sub rented. Only used on my jobs. $45,000 plus if purchased new. Selling everything listed complete for: New Reduced Price is $28,000 US. This system can be upgraded to a wireless system easily through Ravensclaw and with a controller board upgrade, can be used with Inertia Wheels. Ask about a special stabilized third axis add on for a very special price for anyone who purchases this Talon Head which can be used separately off of the head as well. You can message me through the forum but i may or may not get it quickly so please email for questions, more details and more photos to: graysonaustin@me.com Grayson Grant Austin, SOC All photos were taken by me and are my property and are not to be used for any other purpose.

For sale is an absolutely unused/as new Flowcine Tranquilizer Vibration Isolator with the fantastic Industry Sherpa Upright modification and added air bladder. Here is what is included in this sale: *Flowcine Tranquilizer (which includes Shore 30 and 40 polymer ring sets, Shore 30 pan barrel set and passive weight plates set). New cost is $1830. Also included in this sale: *Shore 60 polymer ring set. New cost is $125. *Shore 70 pan barrel set. New cost is $460. *Male mitchell mount and castle nut. New cost is $425. *Female mitchell mount. New cost is $265. *Industry Sherpa Upright Mod and Air Bladder. New cost is $725. All together, the cost to purchase new is $3830. Selling everything listed in unused/as new condition for $2500 US. Shipping is not included. Buyer is responsible for shipping (and customs fees if out of the US). The additions made to polymer sets and pan barrels make this Tranquilizer equally great for smaller gimbals like Movi Pro and Ronin2 as well as larger gimbals and remote heads like the Movi XL and Arri SRH360, etc. The upright mod and air bladder make this Tranquilizer equally useful for upright mode (which the standard Tranquilizer and many other VI systems cannot do). This Tranquilizer was purchased as a secondary/backup system and is no longer needed. It has never been used on set. Workshop testing only. If you are a Ronin2 owner and doing off road/vehicle mounting, this is a must have. If you are a Trinity 2 owner and plan on getting the pan motor upgrade for remote head use, this is for you as well. Email for more photos or any questions related to the sale of this item. Below is the weight range chart for the different polymer ring sets. Serious only please. Grayson Grant Austin, SOC graysonaustin@me.com • Shore 20 weight range: up to 5.40 – 10.75kg •Shore 30 weight range: up to 6.70 – 13.25kg •Shore 40 weight range up to 11.25 – 22.50kg •Shore 50 weight range up to 13.75 – 27.50kg •Shore 60 weight range up to 19.00 – 34.50kg

Following

68000$ new price

Kenyon ks-6 and inverter. Excellent condition MKV Power cable. P-tap power cable Works flawlessly Located London £1200 feel free to WhatsApp me +447599465514

Excellent condition Super smooth 1.8” gimbal not being used/backup is the reason for sale Located in London feel free to WhatsApp me +447599465514

Hi All, I’m selling my reliable and sturdy Tiffen Steadicam Flyer LE. It is an excellent starter rig for anyone wanting to get into Steadicam and learn the basics and it is capable of taking some decent camera payloads (approx 8,5kg / 20 lbs). Included in the package is: - Flyer Sled 
(HD-SDI converted) 12/24 Volt - Flyer Arm 
(up to 25-30 lbs / 11-13 kg) with bag - Flyer Vest - Long Dovetail Plate 
 - (2x) IDX Powercube V-lock batteries (90mAh) - (1x) Dual V-lock battery charger 
 - (2x) BNC cable (0,4m) - (1x) Spare IDX V-Lock battery Plate - (1x) 3-pin Lemo - 4-pin XLR power cable - (1x) Dtap – 4 pin XLR power cable - Monitor Marshall V-LCD70XHB-3GSDI 7-Inch HD-SDI https://marshall-usa.com/discontinued/camera-top-monitors/V-LCD70XHB-3GSDI.php - 5/32” T-Allen Wrench 
 - Docking Bracket (Short) - Docking Bracket (Long) - Carbon Steadicam Stand (one locking section is broken, check pictures) - Soft Carry Case 
 For the record, it left the factory in 2010, was bought by a very careful man who cleaned it every time it went out, then I bought it 2 years ago to train at home. It must have been flown about fifteen times, which explains its condition, even cosmetically, almost new. The gimbal reacts very well, no friction, total fluidity. 3000$ + Shipping (can be worldwide), Located in Paris France Please let me know if you are interested, want more photos o have any questions or would like to make an offer. IMG_9436 1.mp4 IMG_9412.HEIC

Located in France! Bought it new in 2020. Never used. Asking 1800€ ex VAT Paypal only. Buyer pays shipping. IMG_2927.pdf IMG_2928.pdf IMG_2929.pdf

Located in France! I bought it new, in 2020. Almost never used it, as it was a spare. Sold with a kit of spare straps ect... No case, no bag. Asking 3800 € ex VAT Buyer pays shipping Paypal only. IMG_2930.pdf IMG_2931.pdf IMG_2932.pdf IMG_2933.pdf IMG_2934.pdf IMG_2935.pdf

$25.00: Arri III/SR II Low Mode Bracket (Hill). Buyer covers shipping charges. Please contact David at dscmove@yahoo.com.

$35.00: Video Camera Handle Low Mode Bracket: extra screws included. Please contact David at dscmove@yahoo.com.

Pana Bracket $35.00: Pana Bracket (Hill) for use with Panavision Light Weight, includes 5” square/round rod. Buyer covers shipping charges. Please contact David at dscmove@yahoo.com.

Following accessories purchased from Jerry Hill Products. D bracket: $35.00. Dog Bones (set of 4) Set- $80.00: 2- 15mm 1.5” dog bone, 2- 15mm 2” dog bone. Iris Rods (set of 3) Set- $25.00: 15mm 2”, 4”, 6” iris rods. 2N1 mount; Arri Iris Clamp and 3.5”, 5”, 7” 15mm sq/rd rod: Set $35.00 - includes 2N1 mount (Arri Rosette to square/round); Arri Iris Clamp (Arri dovetail to sq/rd) and 15mm sq/rd rods 3.5”, 5”, 7”. Buyer covers shipping charges. Please contact David at dscmove@yahoo.com.

Hey all, My wife and I have been back and forth on a huge life decision to move from Canada to somewhere in Europe. We are thinking Spain (somewhere near Barcelona) but I have no connects in Europe so I have no sense of how busy it is over there. I’m looking to get some insight from a few of you to give me a sense in there’s enough steadicam / traditional operating work over there. and insight from y’all will help! thanks

2- BFD Focus with 2- Heden M28VP motor $ 1,250.00: Both complete units (focus and iris covered) with cables/accessories Or separately: $ 600.00: 1- BFD with Heden M28VP motor BarTech Focus Device s/n T10242 and Receiver s/n R10242 Heden Vertical Motor M28VP s/n 20270 (2 cables, 3 mounting rod adapters, 4 focus gear sizes) $ 800.00: 1- BarTech Focus Device s/n T10243 and Receiver s/n R10243 Heden Vertical Motor M28VP s/n 20271 (2 cables, 3 mounting rod adapters, 4 focus gear sizes, 2 oversize focus gears) Panavision (2) run & (1) power, Arri 2 pin fisher (2) run & (1) power, Arri 11 pin fisher (2) run & power, Moviecam 2 pin fisher run; BarTech cables: data cable, power cable, jumper cable to power both receivers; butterfly bracket for both hand controls; rods mounting bracket. Buyer covers shipping charges. Please contact David at dscmove@yahoo.com.