Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. What're the benefit of premium ?
  3. Today
  4. Yesterday
  5. Selling this for a friend. He purchased this from a Vancouver rental house where it barely got used; It is in pristine condition. Includes: Sled, Vest, Arm, American stand and docking bracket. Plus case. Located in Vancouver, Canada. $6500 USD + shipping
  6. I am looking for nodo Weels. Do you sell separately? kind regards Martin
  7. ARRI TRINITY gold mount for sale with Sachtler battery stage (before Curt went to ARRI) .Rig is in good condition and works perfectly .Just finished a Feature with it Yesterday no problems throughout the shoot.I had the Topstage serviced at ARRI a while back also the Trinity head was modified by Alex from FOMA SYSTEMS.Upgrades included : New brighter yellow LCD display that switches off after about 20 seconds (display) to avoid sun damage.24 V upgrade and changed the horrible SMA connectors to BNC connectors.Everyting works great.There is a remote control that works but it needs a new LCD display as this went.You can still tilt and roll remotely without the display.. List includes : -ARRI docking bracket -ARRI TRINITY 1 head 24 V upgrade BNC and Brighter display -TRINITY battery hanger Goldmount -Artemis Post with Gimbal ARRI top stage and SACHTLER Battery stage (Same as ARRI ) -ARRI Post extension -FOMA remote control -3 IDX Goldmount to V mount adapter plates -Portkeys 5 inch high bright monitor and 2 power cables -Trinity camera plate 20 cm -Artemis cam plate 23 cm -Artemis cam plate 18 cm -Head lock brcket - Tool for head adjustment -Tool to loosen/tighten Head or battery stage - 2 Trinity spare power cables 4pin Limo / 4 pin Lemo -Trinity spare power 3pin 12/24 / 3 pin 12/24 Lemo -Lemo 4 pin mini / Lemon 2 pin power for Preston or Teradek -2 spare main command cables with BNC -Alexa power cable Lemo 4 pin -Alexa power Demo 3 pin 12/24V -2 Venice power cables /4 pin Lemo 2-Mini /Amira/Mini LF/35 power cables 4 pin Lemo -Spare centre post cable -ARRI rain cover for battery stage -Case for head -Case for Sled Asking 35,000 EURO Equipment located in Budapest Hungary.
  8. It very crowded. Very competitive market and hard to get jobs. that is all I can tell you.
  9. Last week
  10. Up for sale on eBay. https://www.ebay.com/itm/315448646395
  11. - Betz wave 1 - XCS side to side camera plate - d-tap / 3 pin / 2 pin power cables - original HPRC hard case dani.dagher@hotmail.com IMG_1378.HEICIMG_1377.HEICIMG_1376.HEICIMG_1379.HEIC IMG_1378.HEIC IMG_1377.HEIC
  12. I have a few Bingo Plates left. They have been a life saver on set the last year. Link below https://jbsteadicam.com/online-store/ols/products/steadicam-bingo-plate WHAT DOES THE BINGO PLATE DO? The Bingo Plate is a universal Steadicam dovetail that works with ALL Steadicam manufacturers and builds. (PRO, TIFFEN, XCS, BETZ, etc) Rarely are we given a perfectly balanced camera. With 14 years of Steadicam experience I knew that having more flexibility with left and right adjustments was a MUST. Most operators with whom I spoke, including myself, do not like having their top stage fully maxed to either side just to offset the weight up top. No more Jenga Tower builds! Nothing is more frustrating and time consuming than having the AC rip apart the build, move motors, transmitters, etc, just so you can balance the rig! Once again, pulling from my knowledge as a Steadicam Operator and countless conversations with other operators and camera assistants, I knew that making the plate modular was important. Most plates presently on the market are limited. I wanted to give operators as many mounting options as possible so they could build and mount accessories exactly how they wanted. The Bingo plate allows for multiple configurations using the standard 15mm iris rod bracket and an Arri style single-hole iris round mount. SPECS 14"/ 355mm long to accommodate larger builds. (11) 3/8 screw slots for easy left and right camera adjustment. No more MAXING OUT your top stage to the left and right. Multiple mounting points for 15mm mini rod bracket and Arri style single rod clamp. Engraved gridline system on the underside for tracking and remembering screw placement. Laser-etched ruler for precision alignment. End of plate safety screws.
  13. I'm the second owner of this arm. It was purchased new in 2008 and was kept in fantastic condition since I got it in 2019. A year ago, I had the entire arm serviced with all bearings replaced, and cans cleaned. the arm comes with a bag, can case, tools, replacements bits and bobs, 3 arm posts 6/10/12, and arm post spin adjustment kip handle. 'Starting at $15k will entertain offers. free delivery tri-state area.
  14. Walter Klassen Singleshot Rig with Vest (NOT Flex) / Harness Kit in excellent condition bought for a job now not using it so has to go, it's an awesome bit of kit. Comes with extra Elastics Heavy, Medium & Light. D ring, spare rollers, harness pads, pump, spare parts kit & padded case Included. Measurements for 186cm (6ft.2) height, weight 85kg (187lb) *Shipping extra & equipment is based in Sydney, Australia. USD$4950 + shipping AUD$7400 + gst IMG_4224.HEIC IMG_4223.HEIC IMG_4222.HEIC IMG_4221.heic IMG_4220.heic IMG_4219.heic IMG_4218.heic IMG_4217.heic
  15. XCS STUBBY PLATE got this for my Wave, but its a reserve plate. Asking 250$ Located in Brazil if you want ask me about it +55 11 950307133 whatsapp
  16. Just paid. Thank you very much Tim! - Sean
  17. $4000 plus shipping. Includes both canisters and case. Great condition. Rarely used. New in 2013. Arm not included. (Canister, cannister, cannisters for search.)
  1. Load more activity
×
×
  • Create New...