All Activity

I am selling my steadicam zephyr due to a hip injury I got from running a couple of years ago and sadly I've been unable to recover well enough to return to operating... It's a sad day but time to let it go. Includes all standard zephyr equipment. All is in fantastic condition with the odd scuff here and there. Sled Arm Vest Docking bracket Dovetail plate Steadicam HD anti reflective high brightness monitor from Marshal. 6pin hirose to video/4pin XLR power (+tally) 3pin Lemo to 4pin XLR Original monitor mount HD-SDI cable Rolling case. Plus extras: 2nd battery plate (AB/Gold) enables 24v Weights Lowmode/F bracket Sky magic CG monitor mount Sky magic grip Camtec plate with 15mm rods and 3d printed extension (for broadcast cameras) 3pin Lemo to 4x Dtap 6pin hirose to 4 pin XLR 2x short HD-SDI DIY Tally system Arm bag Throwing in 2 swit batteries and charger but they don't hold a charge well so not much use for anything other than practice, they will power the monitor for a couple of hours but not much else. Camera and C-stand are NOT included. Based near Glasgow, UK. Looking for £6000. (no VAT)

Hey everyone, I just wanted to share that Apex is now offering PRO Compatible Steadicam Components! We just released our new Battery Rack 1, 4:1 Smart Jumper Block, and Monitor Yoke - they are all available for pre-order now. Please check out the website listings to read more about them and let us know if you have any questions! https://apexcinemagear.com/collections/pro-compatible-steadicam-components

SOLD thanks

FULL STEADICAM ARCHER 2 VOLT w/ G50x KIT Full Kit Price - $25k Steadicam Archer 2 Sled (V-Mount) Steadicam Volt Upgrade for Archer2 Steadicam Exovest with Large Socket Block Steadicam G50X Arm Bag for the arm Dovetail Plate 7x RED V Mount Batteries 2x RED V Mount Chargers Pelican Case For Batteries and Chargers Low mode bracket Long Arm Post Steadicam Docking Bracket Thermodyne Hard Case for Sled and Arm Steadicam Tally Cable VFA-2 Alexa Mini Viewfinder Adapter 1x 12V Lemo to XLR 4-pin cable 1x 24V Lemo to Fischer, Alexa power cable 1x 24V Lemo to Fischer, Alexa Mini/Amira power cable 1x Tally Light Cable Located in Los Angeles, CA Email: russelltandy1@gmail.com

Still selling these!

Sure! I have sent you a PM.

It is the steady of a friend who wants to sell it, I leave his contact information. base in Spain price 30.000€ full pack Amando Crespo steady-bros@steady-bros.es

Is this still available by chance ? thanks, Ian

IMG_1131.mov Thanks Benoit, I do have the Apex plate, and I’ve also used a heavier and more solid plate, and that actually helped reducing the trepidation. But the problem is in the lock/female/ Bud - 1 from Arri (I've already tried 3 of them) . The small lock as you mentioned or something about it’s structure seems to be the problem... I’ve recorded this small video where is possible to see where the problem is… no problems in light lenses, but on the really heavy ones when running the plate doesn’t handle the vibration…

Do you sell the Betz rider separately ? Thank you

Is this still for sale?

Hi Ariel, I am not 100% sure I understand your question, but the best plate around is certainly APEX’s. Lightweight and super solid. https://apexcinemagear.com/products/arri-35-universal-stabilizer-plate Always been super solid, no vibrations and no issues. Since I got that plate, I like the BUD-1 System, very low profile and easy to use. It gets the camera so close to the top stage! I would like the locking area to be larger, and the safety release to be on the same side as the lever, but it’s still really good, didn’t get any slippage. Gunk sometimes builds up in the safety release but easy to clean.

Bump

680.00

3000.00

sold

sold

I’m selling the GLINK with 3 sets of springs ranging from light to super heavy. The vest is not included, so all you need is the X-Spine and you are ready to fly! Save thousands and it ships in the USA. It comes with the Ring and the dock, as well as spare posts and every other spare they offer. It’s in great condition and it’s a great tool for gimbal operating. I also included the hand held riser for any hand held non-gimbal use in the ring. The only reason I’m selling it is because I wont be able to be in a vest for a couple years and I could use some spare change. I want it to go to a good home. Feel free to message me for any details! Asking price: $4,999

Hello , I'm selling my whole kit due to a new direction in my career: - Ultra 2 cine: 12/24v (V-mount) , Volt compatible, with tilt head, fully serviced at Planning Camera (Paris, FR) - G70 with X upgrade fully serviced at Planning Camera (Paris,FR) - Master vest (the leather one) - Transvideo 8" (grey button version+ virtual horizon 2 upgrade) - 2 docking brackets - 2 steadicam dovetails - 2 arm posts - 1 F-bracket - A bunch of cables and BNC - Hard mount kit including hihat and euro mount - 1 wind killer (slightly used) - 1 cat griller - 2 weight plates (2.2 kg each) - 1 Chrosziel 401-120 Vmount camera QRP - 1 Small rig BP compatible dovetail - Manfrotto 070 stand, modified with headless screws for more clearance around the sled, indoor wheels included. Everything is located in Normandy (France , 1h30 from Paris by car or train) where you are welcome for any testing you want, we can also meet in Paris under proper conditions. Asking 25.000€ excl VAT, buyer pay shipping. Kit is for sale as a whole, no breaking it for now. EU buyers prefered FYI I also have a sh*t load of accessories, used parts, spares, tools and workshop junk that are gonna be for sale after this kit is gone, a bundle can be proposed of interested.

I’m selling my BETZ WAVE 1 and WAVE RIDER Great equipment! Never had any issues with it. Comes with: Betz WAVE 1 Betz WAVERider Dovetail medium (23 cm/9“) Dovetail short (18 cm/7”) Power Cables: WAVE 1 – D-Tap WAVE 1 – Lemo 3pin for GPI-PRO Cam/Power (60 cm/24’’) WAVE 1 – Lemo 3pin for GPI-PRO Cam/Power (30 cm/12”) WAVE 1 – Lemo 4pin for GPI-PRO Focus 4mm Allen key 4 x 3/8 screws Case Cable bag Manual Gear located in Berlin/Germany Invoice possible Buyer will pay for shipping and customs duty Asking price EURO € 5 200.00

Hi, does anyone know if there is a better female plate lock for the BUD-1 system from Arri? I’ve been facing some trepidation in heavy setups when running fast with Arri’s original plate lock. I’ve tried changing plates, changing the “female dovetail lock” but it’s possible to see that has to do with the sliding plate on the arri lock structure. This happens even more when in low mode having the camera upside down… Thanks in advance for any possible solutions.

$5000

bump $11500

I have a MKV with a volt under 20k email me kjacobsen.ny@gmail.com

Willing to negotiate price and separate items