Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/07/22 in all areas

  1. As far as I have found out as long as the cable isn’t set for 24v power it shouldn’t pass through. I have 12/24v set up on my clipper 2 and it will only power 24v if the cable is wired for 24v. You can see if the cable is by simply removing the lemo connector and checking which cable is where. There should be an open port that is for 24v. But to double check it wouldn’t hurt to take a volt meter to the power ports and check
    1 point
×
×
  • Create New...