All Activity

Yes it's available. I had it as a spare for a M1 Tiffen Gimbal so do your research for fitting to a 2" post.

Hello, is this still for sale ? Also will it fit a 2” post ? Thank you

This arm was purchased new in 2014. It has been my personal arm ever since and was never abused, and it still works great. It went back for service in late 2019, and has been remarkably trouble-free through its life, only having one part fail, which was replaced under warranty. The arm includes all 8 canisters, which means it can carry any loads between 13 and 72 pounds. This has come in quite handy for carrying both small cameras on little rigs, as well as fully built 35mm camera packages. I am also including quite a few spares, tools, brand new parts, and upgrades, which you can easily swap in. I am including several of my own precision-machined Stainless Steel arm posts, which are much stronger and tougher than the original aluminum versions. The arm has special neoprene rubber bumpers on the center section to prevent vibration from moving down the arm when running, and rubber grip tape on the bones of the arm to allow for better grip, especially in cold climates or with sweaty hands. The arm also has an updated arm post friction system, which allows the arm post to be tightened more easily (with a tools-free Kipp handle) as well as having more friction available via a custom-machined sleeve inside of the arm. With a half turn of the Kipp handle, the arm post goes from completely free to fully locked, and can be set anywhere in between at a moments notice. This arm sells new (even with GPI PRO’s recent price drops) for $21,500, and it still works as well as it did when it was new. I’ve even heard an operator with a PRO arm call mine “an especially good one”. I’m asking $18,000 or best offer for the full package, which is in line with recent sales - these arms do not lose much value, and hold up exceedingly well over time. Email me for more info. Tom.Wills.Soc@gmail.com Includes: GPI PRO Titan Arm Chassis # 639 4x Blue Canisters 4x Black Canisters 6” Arm Post w/ 2 Collars 8” Arm Post w/ 2 Collars 12” Arm Post w/ 2 Collars Spare Rod Ends and Screws for Socket Block (brand new) QR Pin for Socket Block Adapter (allows for quick switching from regular to goofy) 7 Spare Pivot Nuts (a part often lost if it loosens up in travel) 2 Spare Canister Pins Kit of standard spare parts (washers, clips, etc…) 2 PRO Arm Tools Soft Bag for Arm Soft Bag for Canisters PRO Arm 5/32” wrench

SOLD

PRICE DROPS TO 1000 USD

SOLD

Price reduction on the Vaxis Cine 8 Monitor/Receiver. Now selling for $2000 US. Grayson Grant Austin, SOC

Bump. G70X in excellent condition. Recently serviced by Tiffen. Comes with rain/dust covers, travel bag and your choice of Tiffen size 6 and 12 inch armposts or PRO adapted end armposts. $9500 US. Grayson Grant Austin, SOC

Sold.

Price drop. Now selling for $1100 in unused/as new condition. Grayson Grant Austin, SOC

Bump. Teradek Bolt 6 (6ghz) XT Max. This is the 12G 4K SDI version with Max range using the uncluttered 6ghz band. Sells new for $13,590 without extras. Selling this one nearly new in pristine condition for $10,000. Grayson Grant Austin, SOC

$4,500.00 or best offer plus S&H The Segway X2 Off-road Glideseg allows traveling up to 21km/h. You can attach a Glidecam, Steadicam, Pro or other arm using the industry standard socket block connection The Glideseg opens up previously inaccessible grounds to operators using stabilizer arms without wearing the stabilizer weight load and achieving great smooth moving camera shots. The Off-Road version enables them to move away from smooth roads, paths or prepared ways. Weight: 50kg Capacity: 120 kg Power: 4 Horsepower's Speed: 21 km/h Possible Distance: With LION Battery HT up to 35km Charging Time: 5 Hours The unit was used at a few trade shows years ago and has been in storage for past 5+ years. The unit will need to have new batteries

BUMP Full kit - $34.000 Sled - $28.000 Sled is still under warranty until Dec 2025.

I fried my J Box last year and got great service, fast shipping and repair times plus phone support. 👍🏼

6k price will include half the weight cage - A 5kg plate (this is all you need tbh) as I want to keep a plate for training.

Bump

Steadicam Training Videos In the summer of 2022, I found myself sitting at a cottage (not my idea) in the midst of COVID, watching Youtube videos about how to operate a Steadicam. The most clear and concise video is the original Steadicam SK training video: Despite its age and the fact the original Steadicam SK is a single bone arm, I learned a lot from it. Another really key instructional video was the Steadicam EFP training tape: Again, really helpful information. What I didn't have at this cottage was the actual Steadicam rig, I was still repairing it. I think that would have really helped to practice while watching these videos. What really impressed me about these original videos was that they started with basic information, yet imparted expertise that many "beginner" YouTube videos don't. You can see by the way the evolution of the components of Steadicam, if not from the design, the manufacturing and cost reduction over the years. In the SK video, they go over the already simplified vest (that is missing the quick release rip cord functionality shown in the EFP video) and I could see how my Flyer vest was further cost reduced to remove parts while retaining the core functionality.

For sale is a mosespole Volt yoke with baby pin adapter and pin. You know you need this. low low price of 475 Shipping is on the buyer. thanks, Buzz Moyer

Bump

open to offers here. Everything is available except the arm, canisters, and arm posts. I still have the Klassen Rigid Socket block as well.

Hello, Looking to buy a steadicam arm post for 3A arm to Archer 2 sled. 5/8" to 1/2" if anyone has it please let me know. I'm based in Los Angeles. Thank you

Hi Keith, Greetings from a fellow ACS Steadicam operator! Hope you are well! I am interested in buying your Sneaker Dolly. Is it still available? I am currently in Toronto on a show and would love to have it as part of my kit. My numbers are +61 450 223 837 (416) 835 7637 richardwilmotproductions@gmail.com Look forward to hearing from you. Cheers, Richard

Bump

bump