Mark OKane

Bump

Alec - thanks for the kind words - I was surprised how long this took to sell - Thanks for the interest - but it has SOLD

I have received 29 e-mails mostly asking " Gyros - why and when " . Gyros were such a valuable part of my Steadicam kit that I would love to answer them all. To avoid repetition and guide those with interest to the right places besides the Marketplace, I would suggest you start with your own research. A good start would be at the beginning with this link sent to me by Erwin Landau http://www.steadicamoperators.org/files/v4n4july95.pdf . I think you will find the issue very interesting -What a snapshot of the times. Larry does a good job of articulating Gyro theory and use. It is also theTed Churchill Memorial Issue - . Put "gyros" in the search box in The Forum. A lot of info will come up. Anything by Larry McConkey will be worth a read. He spent a great deal of time with them and was generous enough to publish his results. There are also many other worthwhile contributions. I used the KS-4s on lightweight / running rigs to add mass and lessen the wind effect and several handheld configurations where weight was an issue . With all the lightweight cameras and rigs out now the KS-4s would seem to be pretty useful. Good Luck and before I forget that - yes - this is the Marketplace Price $ 3,500.00 ---------------------------- OBO

BUMP -------------------------------- $ 575.00

PRICE $ 3,500.00 OBO

This was sold. When I was finishing up the payment and shipping with the operator he told me what use they were intended for and asked for my opinion. He got it. Soooo now they are back on the market. TWO KS-4 Gyros, one with the GPI Cable and flange conversion, one is stock. Both have been given the total rebuild by Kenyon. Everything was replaced except for the wheels - new casings , new motor, ect. The only run time has been for testing and the only shipping they have seen is to get them here. They are obviously in great shape. Each gyro comes with a standard 12 volt inverter, but I have also included (2) 28 volt inverters and a 12 and 28 volt heavier duty inverter for spares. I have included factory pricing for reference since GPI still sells the parts, but they are presently not listed in their online catalog. Moving the price to $ 3,700.00 to get this sold ITEMS FACTORY PRICE Kenyon KS-4 Gyro w/ PRO Conversion GYRO $ 1,700.00 GPI Lemo Block $ 175.00 GPI Mounting Flange $ 332.65 12 volt inverter $ 325.00 Cables GPI Lemo to invertor 8 ft $ 125.00 (2) GPI Lemo to Lemo 2ft $ 250.00 Kenyon KS-4 Gyro Stock w/1/4- 20 mount $ 1,700.00 12 v inverter $ 325.00 Gyro to inverter cable Kenyon Inverter Spares (2) 28 volt, (1) Kenyon 12 v -KI-12-6, ( 1) 28V , KI-28-6 GPI Brackets not included above GPI Post Adaptor 1.5" $ 400.00 (2) GPI Mounting Spuds $ 168.00 GPI Spud Clamp $ 232.65 Custom Adaptors 3A Plate / Custom Delrin Spacer for GPI Spud w/ tilt bracket (needs plate lockdown fastener ) $ 200.00 + Custom 1.5" Adaptor for 1/4-20 $ 200.00 + mounting screw ( can be modified for GPI Spud with thread adaptors contact me off Forum in the message app or markokane@earthlink.net

This posted before I was finished so i cleared it

I am dropping the price to $ 3,900. OBO

I have been getting requests to break up the kit for various items. I will go for the Best Reasonable offer for the complete kit before I go through the joy of parting it out. So ------- Best Offer Thanks

If you are interested - make an offer

Dropping the Asking Price to $ 600.00 . That's about $25 per dogbone and $ 12.00 per Mattrod ------------------------

TWO KS-4 Gyros, one with GPI conversion, the other stock, that have been given the total “ like new “ redo by the Kenyon factory. The only run time on them has been for testing. Comes with a selection of GPI and custom accessories and 12 and 28 volt invertors. The invertors have stock connectors so the buyer can do what he/she desires (XLR - LEMO ? ) I didn't use them so they are in great shape. If you add it all up including ONLY 4 invertors @ $ 325.00 (6 is overkill ? even though the heavier duty ones are useful ) it comes to about $ 6,750.00 in value. Two basic Stock Gyros w/ invertor setups from Kenyon run about $4,000.00 together with no accessories. ASKING PRICE FOR KIT $ 4,600.00 ITEMS FACTORY PRICE KS-4 GYRO $1,700.00 GPI LEMO BLOCK $ 175.00 GPI MOUNTING FLANGE $ 332.65 KS-4 GYRO STOCK 1/4-20 $ 1,700.00 XLR CONNECTOR TWO KENYON KI-12-1 INVERTORS TWO KENYON KI-28-1 INVERTORS 1 KENYON KI-12-6 INVERTOR 1 KENYON KI-28-6 INVERTER KENYON SELLS THEIR INVERTERS FOR $ 325.00 EACH (6) total in package GPI LEMO To INVERTER 8 FT CABLE $ $125.00 (2) GPI LEMO TO LEMO 2 FT CABLES $ 250.00 (2) XLR POWER TO INVERTER CABLES INC GPI FLANGE CLAMP 1.5” $ 232.65 can be used in the conversion of the stock gyro to GPI fittings/ spuds (2) GPI MOUNTING SPUDS $ 168.00 GPI POST ADAPTOR $ 400.00 3A PLATE / CUSTOM DELRIN SPACER FOR GPI SPUD/ W/ TILT BRACKET $ 200.00 ( needs plate lockdown fastener) CUSTOM 1.5 POST ADAPTOR FOR 1/4-20 MOUNTING SCREW (can be modified for GPI spud with thread adaptors) $ 200.00 Contact me off Forum in the message app or markokane@earthlink.net

SOLD - Thanks

Dogbones and Mattrods. Posted these awhile back. They ended up not changing hands. --- Good kit with a decent price ---- Price for all items in kit $ 650.00 USD Dogbones ( 14 Total ) 15MM (7) piece custom set ( Grey ) I had these made up to fit where the stock ones would not. (1) .70", (2) 1",(1) 2.25" , (1) adjustable 2.30 to 2.40 approximate, (1) 2.75", (1) 3" (6) Piece stock set (3) Chriozel short ( Black ) --- (3) Chroizel medium ( 2 grey, 1 blue ) (1) Custom 3" blue Matt Rods ( 21 ) Total 15MM (1) 10" Black, (2) DeRose Arri 6" (1) 3" Derose Arri Custom Made Thinwall Rods ( nice job by the machinist ) (3) 6" (2) 4" (1) Chroizel 3.5" Stainless Steel Rods (1) 5", (1) 3", (1) 2.5" w/ Preston Motor screw, (1) 1.75", (1) 1.50", Preston (1) 3" (2) 1.5 " Jerry Hill Rods w/ (3 ) round tiedown adaptors (1) 3.5" (1) 2" (1) 7" Contact me @ markokane@earthlink.net - or off forum

Fits 1.5 " Posts $ 250.00 Contact me off Forum with the Message Function or markokane@earthlink.net

Sold

best offer takes it

best offer takes it

It has been so long I didn't remember - thanks John

Cinema Products 3A Topstage PRICE $ 750.00 (2) Standard Dovetail plates, (1) 12" Dovetail plate - probably for some ancient video camera ( CP Phillips ? ) might be handy for some of the DSLR rigs tight fit in the dovetail - needs to be relieved a bit . (2) 3" mattrods, (2) 6.5" mattrods, Reply by personal conversation or markokane@earthlink.net

SOLD - Thanks

FITS 1.5" POSTS $ 275.00 USD

Dogbones and Mattrods for all occasions. Price for all items in kit $ 1050.00 USD Dogbones ( 14 Total ) 15MM (7) piece custom set ( Grey ) I had these made up because I got tired of the stock ones almost maybe fitting . (1) .70", (2) 1",(1) 2.25" , (1) adjustable 2.30 to 2.40 approximate, (1) 2.75", (1) 3" (6) Piece stock set (3) Chriozel short ( Black ) --- (3) Chroizel medium ( 2 grey, 1 blue ) (1) Custom 3" blue Matt Rods ( 21 ) Total 15MM (1) 10" Black, (2) DeRose Arri 6" ( you cut the square off to fit the need ) (1) 3" Derose Arri Custom Made Thinwall Rods ( nice job by the machinist ) (3) 6" (2) 4" (1) Chroizel 3.5" Stainless Steel Rods (1) 5", (1) 3", (1) 2.5" w/ Preston Motor screw, (1) 1.75", (1) 1.50", Preston (1) 3" (2) 1.5 " Jerry Hill Rods w/ (3 ) round adaptors (1) 3.5" (1) 2" (1) 7" ( not shown ) Contact me @ markokane@earthlink.net - not on the forum

SORRY MATHIEU - THE UNIT IS SOLD

SOLD - THANKS FOR THE INTEREST