Jump to content

Marco Dardari

Sustaining Members
  • Content Count

    92
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Marco Dardari

  1. Marco Dardari

    TVlogic F-7H 3600 nit

    Has anyone tried the new Tv-Logic F-7H with 3600 nit of brightness? thanks Marco
  2. Marco Dardari

    SMARTSYSTEM Sled/Vest/Arm

    No longer on sale for the moment thanks Marco
  3. Posting on behalf of a colleague He is selling his SmartSystem steadicam system in good working condition Set includes: - Matrix Sled - X1 Arm - 8 springs - Case - Vest lite - Docking bracket The system will be completely overhauled by SmartSystem labs at the time of sale Make an offer, buyer pays for shipping thanks Marco
  4. Marco Dardari

    MustHD 703S Hyper-Brite monitor 2200 Nits

    I do not agree. I tried the monitor but I was not satisfied. First, the quality of the construction is not good, especially the keys. According to the monitor has a problem of refreshing the panel, every 2/3 seconds loses some frames, also has a big problem of jittering on the color. Marco
  5. Marco Dardari

    TVlogic F-7H 3600 nit

    Grazie Mirko! Si conosco Carmine, ottima assistenza. Stai usando il tvlogic sulla steadi? Com'è la qualità/dinamica dell'immagine? Marco
  6. Marco Dardari

    Shadow-Volt Kit availability

    Ok thanks!
  7. Marco Dardari

    Shadow-Volt Kit availability

    Some news about the availability of the Tiffen Shadow Volt Kit?
  8. Marco Dardari

    Shadow-Volt Kit availability

    Yes
  9. Marco Dardari

    Steadicam M1 Volt

    Thanks Jerry, Another question: if over time the gilmbal goes out of center, is it possible to recalibrate it?
  10. Marco Dardari

    Steadicam M1 Volt

    Maybe the photo1 setup makes the monitor less visible for goofy operators? What do you think? Marco
  11. Brand new Betz Wave1 package for sale, no signs of wear and tear - n.1 Betz Wave1 - n.1 Universal Betz Dovetail Plate mid (23 cm/9") - n.1 D-tape power cable (12v) - n.1 3 pin Lemo 0B power cable (12v) - n.1 Hard Case with manual Still under warranty Selling all package for 6100 euro plus shipping (ex VAT) email: marco@dardari.it
  12. Marco Dardari

    Betz Wave1 for sale

    Sold.
  13. Marco Dardari

    Steadicam M1 Volt

    Thanks Jerry!
  14. Marco Dardari

    Steadicam M1 Volt

    what is the purpose of the display socket (with hirose connector) in the control unit?Thanks
  15. Marco Dardari

    Betz Wave1 for sale

    Hi Kevin, the Wave is great, works really well but for a moment I need money to buy a Transvideo 8" monitor and set of lights for a steadicam less project, and the wave is unfortunately the most expendable accessory.
  16. Marco Dardari

    Betz Wave1 for sale

    Still for sale Price reduced! 5900 euro for package
  17. For sale Betz Wave1 Bought directly from BetzTools - Betz Wave1 - Universal Betz Dovetail Plate mid (23 cm/9") - 1 x D-tape power cable (12v) - 1 x 3 pin Lemo 0B power cable (12v) - Hard Case Bought May 2017 Selling for 6200 euro plus shipping (ex VAT) marco@dardari.it
  18. Marco Dardari

    M1 Gimbal Adapter GPI Pro Sled

    And for Clipper3 sled?
  19. Marco Dardari

    Pro/Betz/XCS dovetail plate info

    Is the Pro/Betz/XCS dovetail plate width (8,4 mm) the same for all? Even the old 3a plate? thanks
  20. Marco Dardari

    G50X Arm maintenance

    Garrett wrote in February 2007: "Jerry Holway has agreed to help document the breakdown/assembly/parts replacement steps for G-50 and G-70 arms. Hope to have photos/text/diagrams as needed up on the web by the end of March, so these simple procedures can be done in the field with just a t-handle allen wrencn and a socket driver (and a cyclotron). best regards and thanks for the good posts on our 'geo' arms. Garrett Brown " But after ten years there is no document that helps disassembly the arm to clean it even because it is very exposed to external agents how it's done. It is very expensive to send it every time in USA or UK to service the arm.
  21. Marco Dardari

    G50X Arm maintenance

    Hi, I have a Tiffen G50x arm and want to make a maintenance, does anyone know how to disassemble it step by step and which lubricant to use? At least to clean the main bearings. thanks
  22. Marco Dardari

    G50X Arm maintenance

    Thanks Francisco, I also use ACF-50 but it's non enough , I need to disassemble it.
  23. Marco Dardari

    Pro/Betz/XCS dovetail plate info

    ah! ok, thank Jens ,but the other plate are it?
  24. Marco Dardari

    SmallHD 703 Ultra Bright

    Philip, according to your opinion, what is the best monitor between transvideo 8" and SmallHD 703?
  25. Marco Dardari

    Really disappointed by Tiffen

    I am really disappointed by Tiffen, I'm trying for a month to reach someone but they are all out of the office. I don't know what to do
×