alexis marcoux

Selling my Duclos 11-16mm EF mount. I been the only owner and user. Great little zoom!!! It in perfect condition! With a coasted clear from Zeiss as an extra. The waiting time at Duclos was more than 5 months when I bought it... Asking 3000$+shipping. Non negotiable. Please email me if interested: alexismarcoux@hotmail.com

In perfect condition. 2200$+shipping as shown on pictures. No worry, sold on this site many time before. alexismarcoux@hotmail.com

STILL ON SALE

SOLD!! Thank you

Selling the complet Gore link kit with Turret/hook. In perfect condition. Not a scrach. It 1875$ USD new. Im selling for 1275$ USD + shipping. Email: alexismarcoux@hotmail.com *Infos and price: http://www.walterkla...held/gore-link/

Im selling my Traditional Deluxe. Probably the best backmount vest there is! It come with 1 extra arm for low mode shots. In great condition! It for goofy operator!!! Check photos. It cost me 10000$ USD new. Im selling for 6000$ USD + shipping. The pelican case come with it. My email: alexismarcoux@hotmail.com TRADITIONNAL DELUXE HARNESS COMPLET KIT(GOOFY) (with Pelican case) *NEW : 10000$ with second arm(Low mode arm) 1x Walter Klassen Traditional Deluxe vest with Low profile arm *7300$ 1x Low mode arm *2700$ *My measurements(in inches) are : Top :12-8½ Bottom :13¾ X 9. *Walter Kassen FX say that the harness are ajustable by about 15lbs and 2 inchs either way between users. *Im average size. *Measure yourself : http://www.walterkla...uring-yourself/ All infos and prices : *Walter Klassen : http://www.walterkla...itional-deluxe/

SOLD! Thank you

Im sadly selling my beloved steadicam equipment. They have served me well but it time to move on. Theses gears are top of the line. They are a real pleasure to work with and they will never let you down. No matter wish camera set up you have. Expensive indeed. But ask around, you get what you pay for! They are in PERFECT CONDITION. Very little use! AS GOOD AS NEW with NO SCRACHS(Check the photos/40 more available if needed). I been the only owner and user of this equipment. Im selling the sled and the arm TOGETHER! There is a detail list with the 2012 prices that follow. *IF BOUGHT NEW TODAY, THE TOTAL AMOUNT FOR EVERYTHING WOULD BE: 62645$ *MY PRICE IS: 48000$ (Pelican cases included) + shipping. NON NEGOCIABLE! My email is: alexismarcoux@hotmail.com I been selling on that site before so no worry! Again, I have 4o photos ready if you need to see more. Only for serious buyer please. . **XTENDED CAMERA SUPPORT ULTIMATE SLED II COMPLET KIT(with custom Pelican case) *NEW -34770$+case XCS ULTIMATE SLED II Upper camera Platform*4100$ 2.0 Carbon fiber telescoping center post*3500$ XCS Ultimate gimbal with ergo handle(GOOFY)*7150$ Dual Rod telescoping monitor support arm modified for the Tranvideo HD6 SBL*1100$ Ultimate II sled lower electronic housing*13500$ XCS ACESSORIES 1x Side adjustable dovetail plate*450$ 1x Standard camera dovetail plate*350$ 1x Docking station II*1200$ 1x Transmitter bracket*150$ 3x Anton Bauer utility plate*3x150$=450$ 2x Precision ground solid 15mm rod sets(used on the XCS dovetail plates)*2x140.00$=280$ 1x XCS Bartech receiver version bracket*425$ XCS CABLES 1x 12 Vdc XLR camera power cable*170$ 1x 24 Vdc XLR camera power cable*175$ 1x 12 Vdc or 12 Vdc Fisher camera power cable*220$ 1x 24 Vdc Panavision LW camera power*230$ 1x 24 Vdc Panavision XL, Pana/Arri camera power*190$ 1x 12 Vdc Panavision Genesis, Sony F23 camera power*230$ 2x 12 Vdc Red one camera power*2x200$=400$ 2x Monitor Transvideo HD6 SBL power cable from lower electronic housing*2x150=300$ 2x Ultra light BNC for monitor Transvideo HD6 SBL*2x50$=100$ 1x Ultra light BNC for camera to the upper camera Platform*2x50$=100$ **PRO GPI TITAN ARM COMPLET KIT(with custom Pelican case) *NEW -21816$+case TITAN ARM Titan arm with 8 canisters (4 blue,4 black) *21500$ PRO ARM ACCESORIES 1x 6 gimbal post*36$ 1x 8 gimbal post*38$ 1x 10 gimbal post*40$ 1x 12 gimbal post*42$ 1x Low mode bracket*160$ **TRANSVIDEO MONITOR *NEW -6059$ MONITOR HD6 SBL*5109$ at B&H 1x Transvideo «virtual horizon» upgrate*700$ 1x Anton battery modification for weight distribution*250$ All infos and prices : *Xtended Camera Support: http://www.xcsinc.com/# *Pro GPI: http://www.gpiprosys.com/ProArms/index2.htm http://www.gpiprosys.com/ProArms/index.htm http://www.gpiprosys.com/Accessories/Gimbal%20Posts.htm http://www.gpiprosys.com/Accessories/Low%20Mode%20Bracket.htm *Transvideo: http://www.bhphotovideo.com/c/product/561351-REG/Transvideo_HD6CINESB_CineMonitor_HD6SBL_Super_Bright.html

The Plate is SOLD. Thank you

Im selling my XCS ultimate dovetail plate. In perfect condition! alexismarcoux@hotmail.com if interested. Shipping not included

Thank a lot Jens!!! Most appreciated.

I would like to Know if the GPI dovetails plate fit on the ultimate sled from XCS? I already have the XCS plate but I would need a tinner plate for a special setup. Thank in advance for your help

Hey Tomas, I didn't think you were serious about buying. You kept writing about the pro arm?? Guess somehow there was a miscommunication... Hope no hard feekings. Cheers

Just want to tell all my great customer experience with Steadyrig. Not only Hugo as been of great service before and after I purchase my arm. He is the one responsable to find me a buyer. Now is that customer service or what??? And doing all of that when going through very hard personnal times. Thank you Hugo and good luck. You deserve it. Alexis

The arm is sold! Thank you all.

And some more photos: You can reach me at: alexismarcoux@hotmail.com

Im selling my silver spring arm. It like new and in perfect condition! It a great arm and the only reason im let it go is because Im buying a pro arm. Im asking 8300$ CAN+shipping and/or insurance if needed. Here some photos from all angles:

Hi, im selling my Silver pring arm. Great arm!! It like new and should be posted on steadicam marketplace tomorrow with photos and details. To anwser the price question, it suppose to be 13000$ something now because off the increase in material cost. That what Hugo told me when I bought mind. Alexis

Hi Christopher, Im interested in buying one too. Critics are hard to find on internet... It would be very nice if you could post your impressions after trying it. Thank, Alexis

Im looking for a use pro j-box. I do NOT want a DCE sled (without a bayonet fitting at the bottom). I want the j-box that was on the first generation sled made by PRO with a bayonet fitting and a Lemo socket at the bottom of the centre-post. If you can help me, my email is: alexismarcoux@hotmail.com regards

Im looking for a new or use GPI Pro II j-box. You can let me a message on my email: alexismarcoux@hotmail.com. Thank you,

Thank Christopher. Your input is most welcome since i have to make the dicision this week. For the price, the silver spring arm seem to be the best product around... Take care

Thank Carsten. Your inputs are most welcome. And nice work on your website by the way.

Hi, im new to this forum and im looking to get informations from owners on the silver spring arm from Steadirig. Most precisely the new model. Could somebody please tell me how it performing at lighter weights and others tips that would be good for me to know. Thank you Alexis Marcoux