Frederic Chamberland

The Flex4k has a different power connector than the new VEO series. Here's a link to my PRO/Flex4K cable. The VEO has a different power connector (you can actually use 2 different connectors on these cameras)....Also, since the VEO is so small (smaller than a Mini), you might want to use an on board battery at the back if you have a power box attached to it. Cheers, https://www.icloud.c...B0iGdIshaG2kC7y As for on/off : if you are using Iphantom, let the phantom tech use that technology (micro router on camera linked to an ipad) . There is a possibility to use triggers from BNC or 3 pins arri RS connector on the flex 4k. VEO is triggered by BNC or again Iphantom thru router. Or if you have a Mini bob breaker box, you will have BNC triggers. Lots of config . Maybe too many actually.... Good luck.

Cinetronic burned every opportunity to make things right at the time. I had a Gen1 that was great . Got the Gen2 and everything went to the drain. Customer service was NON Existent. Lost about 5K in that venture. I would not buy a single bolt from that company .

Keep them so next time a director upsets you asking for a nonsense shot or asks you to "pan down" : you take one BNSee out and just go Christian Bale with that cable. Extra points using your teeth on that cable. Please tell me they cost a fortune to build.

You've got mail.

email me, I have some . Custom made but they work great. info@frederic.ca

I assume he probably uses it to "pan" the horns with the iris slider. Shooting anamorphic or with very wide lenses, you sometime have the actors on the side of the frame and the cinetape can be adjusted "on the fly" to better hit the target. Cleanscamerasupport as a bracket that uses a motor to do the same. Clever if you ask me. https://cleanscamerasupport.com/product/rangefinder-bracket/

Hi Thomas, I hope all is great ! You would have to change the power connector from PRO GPI to 4 PINS Hi Cap power out for the trinity head . If it does not sell, I will just do that and keep it for the trinity. Cheers ! Frederic

Hi , My loss is your gain; I asked my cable maker to make me one cable and I got two.... the flex 4k power connector alone is 80$. 100$USD and it's yours and I will ship it for free . Paypal only . 18" long . See pics here: https://www.icloud.com/sharedalbum/#B0iGdIshaG2kC7y

Since my bag of connectors sold in about 1 h last week , I went ahead and did some more diggin to put another bundle together. This is the last one : •sony f65 power connector Lemo FGJ.3B •PROGPI cam POWER to mini usb/3mm barrel •PROGPI cam POWER to 2.5mm barrel •PROGPI cam POWER (missing sleeve) to (2) barrels •XLR 4 to barrel •XLR MALE AND FEMALE connectors •PTAP to USB (2) •4 pin XLR to hirose modulus power •XLR 4 to MINI USB •progpi video power to litepanels brick barrel •lemo FGG0B to ethernet (no clue for what camera) Most of the cables were custom made by David Hable at crampedattic when I used a lot of USB powered device on my sled and on board recorders (black magic hyperdeck among many) Take the lot and be happy . 100$USD with free shipping in the USA and Canada . https://www.icloud.com/sharedalbum/fr-fr/#B0iGFssfGGrFrFm

+1 for Engineeredcinemasolutions. They know their stuff.

SOLD

SOLD

sold

Never powered on. Brand new in box. Part of a bundle I bought and already have the non-arri one. ARRI 5-inch OLED Monitor ARRI K2.0006960 (K20006960) Transvideo Starlite HD5-ARRI 5-inch OLED Monitor with ARRI Bus Interface, Touch Functionality and Integrated H.264 Recorder 1 x StarliteHD5-ARRI 1 x Cable Lemo5 to Lemo6 with wiring for the EXT connector of the AMIRA/MINI* 1 x Magnetic snap-on screen cover 1 x 3D swing Arm 1 x 8Gb SD card class10 1 x Pelican case 1 x Standard Transvideo BNC Cable Pics to follow but consider BNIB / mint. Asking 1100$USD + shipping. info@frederic.ca Thanks

My personnal kit, never a rental. Paralinx ARROw-X list : •1• Pelican transport case •1• AC adapter with 2 pin power •3• receivers with both AB plates (male/female) and perch adapter •1• Arrow X pizza ARRAY antenna (one corner is repaired with SUGRU, antenna is still 100% functionnal) •1• Arrow X sender with threaded bracket •2• pins 750 adapters •2• ptap power cable •1• power cable both ends lemo 2 pins. •14• stub ntennas •8• 2db antennas (there are 12 in the picture, only 8 will be included) •4• 5db antennas •5• ARRAY cable adapters from receiver to antenna •4• mushroom antennas (2 not pictured) •5• BNC cables (thin, regular...) •1• remote to change settings (2 remotes / one IR receiver cable) *one of the perch adapter does not have the threaded hole to screw a 750 pin adapter in. (far right one) *Tie wraps around the receivers are there to avoid breaking the cases. *Mushroom antennas are designed to be used exclusively with the ARRAY antenna for best results. *Sender was repaired to new board last year (broke the antenna connectors ) so consider the electronics brand new (2016) everything is 100% working. Been stored for almost a year. Great system at a great price. Asking 6000$USD. Ready to ship on your account. If you don't have an account , please add 80$USD to take care of express shipping in North America. Cheers. Frederic https://www.icloud.com/sharedalbum/fr-fr/#B0i5GH8Mq6RvyH

SOLD

sale pending

Time to upgrade. Here's my beloved GPI PRO sled. HD #73 •telescopic post •DB3 •VZ gimbal with tool free clamp (#364) •Anton Bauer Gen 2 battery rack •MDR bracket with Manfrotto clip •power blocks (3) (only one pictured) •PRO GPI tool kit and gimbal oil •Jerry Hill 1.5 docking bracket rings (hi and low lode) Bought new in 2007 (SD at the time) . Upgraded to HD in 2009 by PRO GPI . Power block pictured was modified by Cramped Attic . It simply allows you to use the center battery (underneath the post) as the camera power battery. The two other power blocks are genuine and never been used. This sled has NEVER failed me. It is a fantastic piece of equipment . Lots of cosmetic scratches thanks to Ted Churchill's Manual of style . I will send it all to PRO GPI for a complete checkup and sled will be shipped directly from PRO . Asking 13 000$USD by wire only. FEDEX shipping on my account to PRO GPI. While it's at Pro, I invite you to buy your cables and brackets you might need to complete your kit if needed as I am keeping most of my stuff. Photos will show you all the parts . And also one pic with the sled all built on the last show I did a couple of weeks ago. Ready to go. Let me know if you have any questions. Frederic https://www.icloud.com/sharedalbum/fr-fr/#B0i5idkMwRiGLA

SOLD

Sale pending

7000$USD , will ship on your account. I can't offer free shipping at that price. This is the final price. Thanks.

This is ,hands down, the most versatile hard mount on the market. Had mine for the last ten years and still abused frequently with 0 worries. Good luck with the sale

8000$ USD. SHIPPING INCLUDED in North America !

My personnal 2575C Bought a brand new one and have to let this one go. Just serviced at local rental house and technicians cleaned it for 2 1/2 h . All locks and drags are fine and 100% working. Never leaked , never dropped . Asking 9000$USD (shipping INCLUDED in North America) Brand new transport case (i'm keeping the old one with my info) New mitchell base and locking nut (kept my cardellini head lock ) One pan arm 30 degree in two sections One 150mm ball mount (brand new in plastic) One euro dovetail with touch n go plate What you see is what you are gonna get . Thanks . Wire transfer or credit card (2% fee extra) https://www.icloud.com/sharedalbum/#B0i55Z2WM6C2NE

I was convinced the Alexa 65 was the only one in the family that could not be fed with 12V .... Only 24V. Bueler ?