Michael Gfelner

Pro Center Lemo Cable -SD I have this cable left over from the conversion to HD Approx 19" at rest. 8 Pins Asking $250.00 Buyer pays shipping

Sold

Sold

Still Available

Still available

REDUCED $48000.00

If your Thinking about It, Make an offer. I might Entertain it. Michael

Hey Everybody looking, here are the pictures of Pro Sled Top and bottom stages with HD-sdi. Make me an offer, I might entertain it. Michael

Hello all, This sled is now wired for HD-SDI and composite by Cramped Attic. Pictures to follow. But The Price for this Sled is now $14,000.00 Monitor for demonstration only Monitor sold separately

Hello all, This sled is now wired for HD-SDI and composite by Cramped Attic. Pictures to follow.

Price reduced to $52000

Breaking up My Package for sale. I'm going to start with the Sled. Nice Pro 2 Sled Donkey Box 3 Pro VZ Gimbal Tool less Pro Center Post with Kip Handle Pro Battery Module 2 with 3 jumper Blocks Recorder Mount Picture includes TB6 Monitor BUT that is not included with sled. Monitor sold separately Batteries are not included Buyer Pays Shipping Since this is from my package I listed to sell, I'm willing to negotiate other items to go with the sled for additional cost (Case, Dovetail Plates, Docking, etc) Asking $12,000.00 I'm in Atlanta Thanks, Michael 818-207-8156

Price reduced to $55000.00

I do not want to sell the Arm separately. I would have posted that by itself if I did. I want to give someone a chance to buy a complete package to operate tomorrow. Thanks

PRO 2 Steadicam Package for sale. I'm hanging it up. Here it is: Pro 2 Steadicam Pro Vest Pro Arm including 8 Spring Canisters (4 black / 4 Blue) with Canister Bag and Arm Bag Pro Centerpost I (Telescoping with Allen replaced by Kip Handle) Pro Donkey Box 3 VZ Gimbal No Tools TB6 Green Screen Monitor with Frameline Generator and arm Pro 2 CRT Green Screen Monitor with Frameline Generator, Arm Electronic Level Sensor Pro Battery Module II with 3 Jumper Blocks Recorder Mount for Battery Module 2 x Docking Brackets 8 x Hytron 50 NiMH Batteries 4 x Anton Bauer Dionic HC Batteries 2 x Anton Bauer 2702 Quad Chargers with Discharge Modules Custom Rig Case with Latches that can be Key Locked Locking Battery Case Holds 2 Quad Chargers and 10 Hytron 50 or Dionic Batteries Pelican 1650 Case For Arm and Vest Pelican 1650 Case For Extras Rain Cover for Pro Arm Rain Cover for Battery Module 2" x 2 1/2" Wrap Grip 2" x 5" Wrap Grip 4 x Arm Posts (4", 6", 8", 10") with Collars 2 x Dock Clamps "D" Bracket for Low Mode 3 x 7" Camera Mount Dovetail Plates (Pana, Arri, Compact) 2 x 9" Camera Mount Dovetail Plates (Pana, Arri, Compact) Lens Servo Motor Support Rods with Dogbone, Fit Dovetail Plates Pro MDR Mounting Bracket Low Mode Bracket for Arri3 and SR3 Hill Arri Iris Rod Clamp Motor Bracket Hill Panavision Motor Mounting Bracket Hill Moviecam Motor Mounting Post T-Wrenches Many Spare Nuts and Bolts Extras: Hill Vehicle Mount with Socket Block Panavision Steadicam Cover VIDEO: 2x AJA MD10 Down Convertors + Cables 2 x Decimator Down Convertors + Cables Modulus 3000 w/ Antenna 2 x Pro to Modulus Cable 2 x Arri Modulus Power Cable 1 x Panavision to Modulus Power Cable Sony Tuner TU1041U 1 x AC Cable 1 x 4 Pin XLR Power Cable 1 x Batwing Antenna 1 x Attenuator 2 x 6’ BNC Assorted BNC Connectors CABLES 2 x Pro Monitor Cables 2 X SONY VID & PWR #6100 1 ARRI PWR #6070 1 X ARRI HS PWR #6075 2 X PANA PWR #6010 2 X MOVIECAM #6040 2 X ARRI 535/SR3 #6077 2 X PANA XL PWR #6015 1 X 16” BAUER BATTERY BLOCK CABLE 1 X 2 PIN LEMO TO 3 PIN FISCHER 1 X 4 PIN LEMO TO 3 PIN FISCHER Several Short and/or Thin BNC Cable Organizer Pouches American Steadicam Stand Preston Wireless Follow Focus Updated MDR1 handset 3 x DM2 Lightweight motors with Spuds 3 x Motor Cables 1 x Hill Motor Bracket 2 x motor Brackets 4 x Batteries 2 x Chargers Battery Adapter 2 Preston Pro to MDR Power Cable Cart: Magliner Senior Cart FilmTools Front Wheel Kit FilmTools Top Shelf FilmTools Bottom Shelf Asking $58,000 Michael Gfelner gfels@sbcglobal.net I'm in Atlanta

For Sale my original Master Series Steadicam Vest. Yes, it's old. Yes, it needs TLC But, if your just starting out and need a good vest, and don't mind putting some work into things, this is a good choice. It needs a socket block and some creative work on the webbing. Years ago I replaced the leather with plastic and webbing to make it lighter and quieter. Padding is good I'm asking $1000 obo Mike 818-207-8156

Sold

Sold

Recently serviced by Chad at GPI. Very Good Condition. With Preston "H" mount $2000.00 Mike 818-207-8156

Great shape, just repaired and over hauled by Chad at GPI. With "H" Bracket. $2000 Mike 818-207-8156

SOLD!

2 Preston Cinema DM2 Motors For sale, great shape. With Posts. $1500 each Michael Gfelner 818-207-8156