-
Posts
0 -
Joined
-
Last visited
Posts posted by Michael Gfelner
-
-
-
-
Still Available
-
Still available
-
REDUCED $48000.00
- 1
-
-
-
Hello all, This sled is now wired for HD-SDI and composite by Cramped Attic.
Pictures to follow.
But The Price for this Sled is now $14,000.00
Monitor for demonstration only
Monitor sold separately
-
Hello all, This sled is now wired for HD-SDI and composite by Cramped Attic.
Pictures to follow.
-
Price reduced to $52000
-
Breaking up My Package for sale.
I'm going to start with the Sled.
Nice Pro 2 Sled
Donkey Box 3
Pro VZ Gimbal Tool less
Pro Center Post with Kip Handle
Pro Battery Module 2 with 3 jumper Blocks
Recorder Mount
Picture includes TB6 Monitor BUT that is not included with sled.
Monitor sold separately
Batteries are not included
Buyer Pays Shipping
Since this is from my package I listed to sell, I'm willing to negotiate other items to go with the sled
for additional cost (Case, Dovetail Plates, Docking, etc)
Asking $12,000.00
I'm in Atlanta
Thanks, Michael 818-207-8156
-
Price reduced to $55000.00
-
I do not want to sell the Arm separately. I would have posted that by itself if I did. I want to give someone a chance to buy a complete package to operate tomorrow. Thanks
-
PRO 2 Steadicam Package for sale. I'm hanging it up.
Here it is:
Pro 2 SteadicamPro VestPro Arm including 8 Spring Canisters (4 black / 4 Blue) with Canister Bag and Arm BagPro Centerpost I (Telescoping with Allen replaced by Kip Handle)Pro Donkey Box 3VZ Gimbal No ToolsTB6 Green Screen Monitor with Frameline Generator and armPro 2 CRT Green Screen Monitor with Frameline Generator, ArmElectronic Level SensorPro Battery Module II with 3 Jumper BlocksRecorder Mount for Battery Module2 x Docking Brackets8 x Hytron 50 NiMH Batteries4 x Anton Bauer Dionic HC Batteries2 x Anton Bauer 2702 Quad Chargers with Discharge ModulesCustom Rig Case with Latches that can be Key LockedLocking Battery Case Holds 2 Quad Chargers and 10 Hytron 50 or Dionic BatteriesPelican 1650 Case For Arm and VestPelican 1650 Case For ExtrasRain Cover for Pro ArmRain Cover for Battery Module2" x 2 1/2" Wrap Grip2" x 5" Wrap Grip4 x Arm Posts (4", 6", 8", 10") with Collars2 x Dock Clamps"D" Bracket for Low Mode3 x 7" Camera Mount Dovetail Plates (Pana, Arri, Compact)2 x 9" Camera Mount Dovetail Plates (Pana, Arri, Compact)Lens Servo Motor Support Rods with Dogbone, Fit Dovetail PlatesPro MDR Mounting BracketLow Mode Bracket for Arri3 and SR3Hill Arri Iris Rod Clamp Motor BracketHill Panavision Motor Mounting BracketHill Moviecam Motor Mounting PostT-WrenchesMany Spare Nuts and BoltsExtras:Hill Vehicle Mount with Socket BlockPanavision Steadicam CoverVIDEO:2x AJA MD10 Down Convertors + Cables2 x Decimator Down Convertors + CablesModulus 3000 w/ Antenna2 x Pro to Modulus Cable2 x Arri Modulus Power Cable1 x Panavision to Modulus Power CableSony Tuner TU1041U1 x AC Cable1 x 4 Pin XLR Power Cable1 x Batwing Antenna1 x Attenuator2 x 6’ BNCAssorted BNC ConnectorsCABLES2 x Pro Monitor Cables2 X SONY VID & PWR #61001 ARRI PWR #60701 X ARRI HS PWR #60752 X PANA PWR #60102 X MOVIECAM #60402 X ARRI 535/SR3 #60772 X PANA XL PWR #60151 X 16” BAUER BATTERY BLOCK CABLE1 X 2 PIN LEMO TO 3 PIN FISCHER1 X 4 PIN LEMO TO 3 PIN FISCHERSeveral Short and/or Thin BNCCable Organizer PouchesAmerican Steadicam StandPreston Wireless Follow FocusUpdated MDR1 handset3 x DM2 Lightweight motors with Spuds3 x Motor Cables1 x Hill Motor Bracket2 x motor Brackets4 x Batteries2 x ChargersBattery Adapter2 Preston Pro to MDR Power CableCart:Magliner Senior CartFilmTools Front Wheel KitFilmTools Top ShelfFilmTools Bottom ShelfAsking $58,000Michael Gfelnergfels@sbcglobal.netI'm in Atlanta -
For Sale my original Master Series Steadicam Vest.
Yes, it's old. Yes, it needs TLC
But, if your just starting out and need a good vest, and don't mind putting some work into things, this is a good choice.
It needs a socket block and some creative work on the webbing. Years ago I replaced the leather with plastic and webbing to make it lighter and quieter.
Padding is good
I'm asking $1000 obo
Mike 818-207-8156
-
-
-
Recently serviced by Chad at GPI.
Very Good Condition.
With Preston "H" mount
$2000.00
Mike 818-207-8156
-
Great shape, just repaired and over hauled by Chad at GPI.
With "H" Bracket.
$2000
Mike 818-207-8156
-
-
PRO SD Center Post Cable -for sale
in Steadicam Marketplace - For Sale
Posted
Pro Center Lemo Cable -SD
I have this cable left over from the conversion to HD
Approx 19" at rest. 8 Pins
Asking $250.00
Buyer pays shipping