Karsten Jaeger

bump

price reduced to 5000USD before VAT

Exo is sold

Hi,

Hello,

i bought an Exovest for a second Steadicam Kit but i ended up using always just my 'oldschool' Vest i learned on, so finally it must go.

It has some marks of use, but nothing to worry about. just cosmetic.

-currently it is set to goofy, but can easily reversed.

any updates on this?

i have the same issue on my g50 (x upgraded). But since i only have the arm as a backup, i did not worked on that for a long time.

i have the feeling, that the problem might be the rubber bumbers on the inside of the segment which wore out so that the arm can boom up just a bit over the usual height making it snap. -when i put 1/4 - 1/2 inch of tape on these, it worked way better.

-but maybe this is just rather a workaround than a fix...

i still have a 500USD letus store credit, what i dont need due to fraud of letusdirect.com what turned out to be NOT letus direct, though letus partnered with that guy so i would asume they need to take full responsibility as they licensed their name to him ...but anyway...

if anybody is about to buy something at their online shop, let me know, you might safe some buck ;)

selling a Tokina 16-28 Cinema ATX PL. Lenses are crystal clear. Common marks of usage on the housing.
2,600€ OBO
will upoad photos soon

Beautiful lens, used it a lot in addition to prime sets when we were missing some on the short end.
Nice precise flares, little distortion, full frame coverage (doing monstro easily)

very useful for light-weight wide-angle steadicam work!

retail price: 3,600€ (https://www.teltec.de/tokina-cinema-...tokina%2016-28)

located in germany

selling a Teradek Bolt 3000 SDI&HDMI 1:1 Kit
common marks of usage and velcro on the housings but of course in perfect working condition.
Bought in 02/2018

we always try to stay on top of the gear game so this unit needs to go for a new 3000 XT though this 'old' 3000 Set almost just became comfortable with us...

will upload photos soon

retail price: 9,191€ (https://www.teltec.de/teradek-bolt-p...am=bolt%203000)
selling for: 8,000€

located in germany

Selling a single Teradek Bolt 500 Receiver (SDI+HDMI).
Technicaly in perfect working condition. Opticaly some usual marks.
pics will follow

located in germany

retail price: 1280€
https://www.teltec.de/teradek-bolt-p...ram=bolt%20500

asked price: 900€

selling a used Bolt 600 set.
it has the usual wear&tear and velcro remains but is technicaly in perfect working condition.

comes with:
1x TX (SDI+HDMI)
1x RX (SDI+HDMI)
7x Antenna
1x PTap Cable
2x SDI Cable
1x case

pictures:
https://www.cineone.tv/wp-content/up...312_193546.jpg
https://www.cineone.tv/wp-content/up...312_193729.jpg
https://www.cineone.tv/wp-content/up...312_194102.jpg


2500€ (before VAT)
located in germany. will ship worldwide

please contact via emal. thx

Hello,

i dont use my x upgraded G50 a lot but i keep it as a nice lightweight and higher boomrange option to my Pro arm.

a few weeks ago i used it for the first time since months (maybe about a year) and experienced that it is locking out very hard when completely boomed up. -so hard that i had to push the arm segment(s) back by hand.

i remember that it always had a lockout issue i am just wondering if it got worse or if i am just used to the Pro arm now, what doesn't do this entirely.

(had this arm for inspection and maintanance at Tiffen Pinewood 1 or two years ago i think)

anybody here with an G50 oder G50x wanting to share his/here experience?

It would be highly appreciated :)

thanks!

Karsten

Bump

4500€

Gesendet von meinem FP2 mit Tapatalk

Bump

2800€

Gesendet von meinem FP2 mit Tapatalk

Hey there,

 

Teradek clearance!

in total:

 

1x Bolt 2000 SDI/HDMI Set

1x Bolt 2000 SDI/HDMI RX

1x Bolt 300 SDI/HDMI Set with 2 RX

1x Bolt Sidekick I

 

This topic is just about the Bolt Sidekick SDI

(working with Bolt 300 / 600 / 2000 transmitters)

 

Retail Price: 1770€

selling for 1200€

 

almost never used!

 

included items same as shipped by teradek originaly

 

located in germany, will ship world wide.

1000€

Gesendet von meinem FP2 mit Tapatalk

do you know if there is any chance to make it work with Movi / MoviPro?

Hey there,

Teradek clearance!

in total:

1x Bolt 2000 SDI/HDMI Set

1x Bolt 2000 SDI/HDMI RX

1x Bolt 300 SDI/HDMI Set with 2 RX

1x Bolt Sidekick I

This topic is just about the Bolt Sidekick SDI

(working with Bolt 300 / 600 / 2000 transmitters)

Retail Price: 1770€

selling for 1200€

almost never used!

included items same as shipped by teradek originaly

located in germany, will ship world wide.

Hey there,

Teradek clearance!

in total:

1x Bolt 2000 SDI/HDMI Set

1x Bolt 2000 SDI/HDMI RX

1x Bolt 300 SDI/HDMI Set with 2 RX

1x Bolt Sidekick I

This topic is just about the Bolt 300 SDI/HDMI Set with 2 Receivers

Retail Price: 4205€

selling for 3000€

very good condition!

included items same as shipped by teradek originaly

located in germany, will ship world wide.

Hey there,

i want to sell some Teradek stuff.

in total:

1x Bolt 2000 SDI/HDMI Set

1x Bolt 2000 SDI/HDMI RX

1x Bolt 300 SDI/HDMI Set with 2 RX

1x Bolt Sidekick I

This topic is just about the Bolt 2000 RX

Retail Price: 4022€

selling for 2700€

very good condition!

included items same as shipped by teradek originaly

located in germany, will ship world wide.

Hey there,

i want to sell some Teradek stuff.

in total:

1x Bolt 2000 SDI/HDMI Set

1x Bolt 2000 SDI/HDMI RX

1x Bolt 300 SDI/HDMI Set with 2 RX

1x Bolt Sidekick I

This topic is just about the Bolt 2000 Set

Retail Price: 8630€

selling for 5.000€

(with second receiver for 7.500€)

very good condition!

included items same as shipped by teradek originaly

located in germany, will ship world wide.

moin moin!

i am selling a Teradek Sidekick SDI ("Companion Receiver), which is barely used.

(compatible to Bolt 300, 600 and 2000. (latest generation))

including:

1x Teadek Sidekick SDI

1x SDI Cable

1x P-Tap Cable

(should be the original content)

located in germany

1.900 USD

or 1.700 €

+shipping (+VAT if necessary)

i try to make some pictures within the next days

also available:

2nd Bolt 2000 SDI/HDMI Receiver

Teradek Sidekick Companion Receiver SDI

viele Grüße,

Karsten

Servus!

i am selling a Bolt 2000 SDI&HDMI Receiver (RX) in a very good condition.

including:

1x Bolt 2000 RX

1x Power-Supply

5x Antenna

1x SDI Cable

1x HDMI Cable

(should be the original content)

located in germany

3.700 USD

or 3.500 €

+shipping (+VAT if necessary)

i try to make some pictures within the next days

also available:

Teradek Bolt 2000 SDI/HDMI Dual Input Set (TX+RX) http://www.steadicamforum.com/index.php?showtopic=25251

Teradek Sidekick Companion Receiver SDI

auf wiedersehen,

Karsten

Guten Tag!

i am selling a Bolt 2000 Dual-Input (SDI&HDMI In/Outputs) TX+RX Set in a very good condition.

including:

1x Bolt 2000 TX

1x Bolt 2000 RX

1x P-Tap Cable

1x Power-Supply

7x Antenna

1x Case

1x SDI Cable

1x HDMI Cable

(should be the original content)

located in germany

7.500 USD

or 7.000 €

+shipping (+VAT if necessary)

i try to make some pictures within the next days

also available:

2nd Bolt 2000 SDI/HDMI Receiver

Teradek Sidekick Companion Receiver SDI

pfiats eich,

Karsten

i am selling my beloved Freefly Movi M10.

It got all the latest upgrades, like the toolless pan knuckle and Toad in the Hole.

The Kit includes:

1x Freefly MoviM10

1x Full Cage Kit

2x Battery

1x Charger

1x Spectrum Remote + Charger

1x Jason Cases Case with custom inlay (http://www.jasoncases.com/store/product/pelican-case-for-movi-m10-with-cage-and-toad-in-the-hole/)

-a lot of accesoirs and spareparts

i changed the main rod, going from the pan motor to the back to an aluminum version, just a few grams heavier but a lot mor riggid.

This still is the best gimbal out there when it comes to lightweight-function ratio. Never let me down!

i'll make some pictures next week.

located in germany

when you are interested, just write me a pm and make an offer

Looking forward to find a nice new home for that baby :)

bump

regarding to this video from Chris Betz you need to balance the camera on the Wave by placing accesoirs to get the COG inside the roll axis.

im wondering if somebody already has some experiences how crucial this is. I am worried ending up placing FF Receiver and Bolt on ULCS arms way above the camera when using a low camera which weight would be under the roll axis...

or is it very forgiving when the camera is not balanced? especialy when having the COG lower than the roll axis i would imagine that it should work pretty well, as far as you dont want to use the wave out of the 0point for asthetic reasons.