Joerg Schenten

SOLD!… Thx everyone…

Sale pending…

Price is 42.500 € ,or OBO ...feel free and send me your price suggestions. Sell preferably to buyers from the EU - sorry UK. Cheers Joerg

I am selling my ARRI TRINITY // Artemis Package. Both the TRINITY and the Artemis are fully serviced. The Package doesn’t include a monitor. The TRINITY includes all the necessary cables to power an ARRI Starlite or a SmallHD 503 (2pin) monitor. Package includes: K2.0010282 TRINITY upgrade bundle 3B, 2.5in K2.0010287 TRINITY Joystick Monitor Mount K2.0010569 Gimbal Handel Extender for 1.8in Gimbal K2.0010288 TRINITY Battery Mount, Gold Mount 4x K2.0010319 artemis Docking Bracket, 1.8in K2.0010290 TRINITY PWR, Lemo 1B 4pin to 1B 4pin K2.0024100 TRINITY PWR, Lemo 1S 3pin to 1S 3pin (only for TRINITY upgraded to 24V) K2.0014805 TRINITY Joystick Main cable (single BNC-SMB cable) Custom TRINITY Joystick Main cable (two BNC-SMB cables VID. OUT & LOOP OUT) K2.0014804 TRINITY BNC cable for Joystick Main cable – spare BNC-SMC cable for the TRINITY Main cable (K2.0014805), backup K2.0014801 Joystick Pwr. cable for ARRI Starlite K2.0014801 Joystick Pwr. cable for ARRI Starlite, backup K2.0014803 Joystick Pwr. cable for Transvideo Starlite and SmallHD 503, 2pin Lemo Custom Joystick Pwr. Y-cable for Transvideo Starlite/SmallHD 503 (2pin) & ARRI Starlite (5pin) K2.0010296 TRINITY Ext. Power Cable, D-Tab to 1S 3pin K2.0014264 TRINITY and Artemis Post Extension 3B, 10pin length 8.5in, diameter 1.8in K2.0010466 Artemis Rain Cover Lower Sled K2.0010299 QL Camera Plate MAXIMA / TRINITY K2.0010299 QL Camera Plate MAXIMA / TRINITY, backup K2.0035956 SSB-1, Stabilizer System Bracket for TRINITY, MAXIMA, SAM plates – mounted to the TRINITY Head ARRI/Sachtler Artemis Cine HD Pro Rig, Gold Mount K2.0010321 Artemis Monitor Bracket 6in / 140 mm Rods / 1.5” Clamp) K2.0010443 Artemis Camera Plate 8in K2.0010443 Artemis Camera Plate 8in, backup 15mm Lightweight Support, incl. 15mm Rods Accessoires K2.0010434 Hex Key 4mm/5.32in K2.0040046 CSS Post Tool for Artemis and TRINITY 3D printed TRINITY Centering Tool HEADLOK and Roll Lock Bracket for TRINITY TRINITY-Bumpers, 3D printed Lenovo YOGA Tablet 2-851F to run the GUI and setup the TRINITY Cables for both TRINITY & Artemis: K2.0010540 Cam Power, Cine, 12V, HiCap, ALEXA Mini, ALEXA 35 * K2.0010538 Cam Power, Cine, 12V, HiCap, ALEXA (full size ALEXA LF) * K2.0010472 Cam Power, Cine, 12V, HiCap, Red EPIC * Custom cable Cam Power, Cine, 12V, HiCap, Red Ranger * *All Cam Power HiCap cables will also work as 24V Cables if used with the 24V upgraded TRINITY in 24V Mode Custom Focus Pwr cable to 2pin (ARRI polarity) for Teradek TX Custom Focus Pwr cable to D-Tap (female) Custom Focus Pwr cable to D-Tap (female), backup Custom Focus Pwr cable to D-Tap splitter Custom Cam Pwr 12/24V, Lemo 1S 3pin cable to D-Tap (female) K2.0016274 Case Artemis Gen. 1, Rig, Pelican 1615 Air, with foam inlay The TRINITY Head will be shipped in a foam inlay in original cardboard boxes. The foam inlay will fit into a SKB 3i-2317-14BE case - which is not included in the package. The TRINITY is upgraded with all the available upgrades - like: K2.0024710 24V Upgrade for TRINITY Gen. 1 Quick Lock Plate Upgrade Pendulum Upgrade New high contrast display, July 2022 The Artemis Cine HD Pro is upgraded to meet al specs of an ARRI Artemis Cine Broadcast – 12/24V power supply, high capacaty wiring (up to 10 Amps), hot swap, 3 battery mounts, 2x HD SDI Video and Tally support. The 1.8in Post and the 2in Gimbal allow up to 40 Kg / 88 lb payload. The Rig (Package) is constantly serviced and upgraded by ARRI CSS and comes with a K2.0010321 Artemis Monitor Bracket 6in / 140 mm Rods / 1.5” Clamp) that supports any Transvideo 6in CineMonitor. I am asking 42.500 € (without taxes) The Package is in Germany, buyer pays for shipping.

Sold! Thanks to everyone...

sale pending...

...SOLD! Thank you everyone!

...sale pending...

Baer-bel CamTec Hardmount I've bought it in 2017, it is in well maintained condition - works flawless. I just used it twice. It is a classic euro pin hardmount (easy to use), which you can extend or even mount the top section to any clamp/scaffolding (50mm diameter). For inquiries shoot me an e-mail at steadicam@jschenten.de I'm asking 400 EUR (buyer pays for shipping and any upcoming money transfer fees) Shipping within EU prefererred

TIFFEN FAWCETT EXOVEST I switched a while ago to a Walter Klassen Harness and after more than a year I no longer need a second vests. I've bought it in 2014-2015, it is in well maintained condition - works flawless. I've replaced all pads recently, so those are pretty new. The Vest will come with a lot of spare parts (set of extra hip pads, neck pad busters and stuff) and a Walter Klassen adapter block (WK arm mounting option/backmount). For inquiries shoot me an e-mail at steadicam@jschenten.de I'm asking 3300 EUR (buyer pays for shipping and any upcoming money transfer fees) Shipping within EU prefererred

...SOLD!....

...SOLD!....

Sachtler ACT2 Vest for sale! It has slight signs of wear and tear on it (backside, right), nothing substantial. Because of the modular construction it's possible to replace any pice (if you wish)! The Package includes: Sachtler, ACT2 Vest spare, big sized Vest-Butterfly and Back-Pads (never used) Vest-Bag The Vest is located in Germany Price asking, best offer (extra: shipping, fees and taxes) Cheers Joerg

Sachtler ACT2 Vest for sale! It has slight signs of wear and tear on it (backside, right), nothing substantial. I never used it since I got my ExoVest, thats also the reason why we had to split. The Package includes: Sachtler, ACT2 Vest spare, big sized Vest-Butterfly and Back-Pads (never used) Vest-Bag The Vest is located in Germany Price asking 2000€/2755$ (extra: shipping, fees and taxes) Cheers Joerg

Chapeau Job!...