Bradley Crosbie

SD programable digital level plus. Comes with mounting plate for GPI-Pro bottom stage. Make me an offer Thanks

Barely used Atmos Samurai with video card included. $300.00USD. Comes with mini HD-SDI adaptor, P-tap power source and soft case.

This small box separates the power and video signal coming from a Pro or XCS rig. Make me an offer? Thanks

I have a brand new, never used Pro Ring set up to rig and carry the Ronin2 head. I was asked to buy it for a series and we never used it. With all the extra bits it came to $800. Asking $650. Thanks

Any interest in selling only your cinetronic, level and cables separately?

Why are you selling? What issues do you have with it? I'm looking for a back-up monitor. A spare monitor... not a monitor for going in reverse. Thanks Bradley

Hi, have you sold the monitor itself yet? Looking for a backup Thanks

Hey Jens, if you ever find yourself wanting to sell the ergo handle separately, I would be interested. Thanks.

Bump

Still have the rig for sale?

Hi Meg, I'd be interested in just the rig without the TB-6, PDL or any of the accessories if you are willing to split up the package? Just curious Thanks Meg

I'm selling my 3' large MYT Works slider. Comes with Mitchell mounts, two bubble levels, four levelling feet, two 750 stand mounts and a hard case. Great design, smooth and easy to maintain with almost infinite rigging options. Less than a year old, and in brand new condition. $3000.00 CDN. Located in Toronto, will ship. brad_c@sympatico.ca

Okay. NOW the monitor is sold. Would really like to sell the PDL. Make me an offer. Thanks

Okay, good news/bad news. The monitor that I thought I was selling, never happened. The TB-6 is still for sale $1950 and the PDL to go with it is $1000.00 It's all in great shape, and I'd love for it to go to a caring home. Thanks

Monitor is sold. Level is now $1000.00 Thanks

I am selling my back-up TB-6 and XCS Digital level. Both are in excellent working order. The monitor does not come with the XCS arm as it is my back-up. The level comes with the mounting bracket to attach to an older PRO battery hanger. TB-6 $1950.00 PDL $1250.00 Located in Toronto,Canada brad_c(AT)sympatico.ca

Still have your sigma head?

Do you have any current photos of the head?

My two cents. The vibration occurs as the camera changes direction from backing away to tracking left. A move that require the arm to return to the centre of balance, then extend out again to the left. The shot is low-mode and if the plate was mounted to an epic carry handle, any arm/rig vibrations would be amplified. If gyros were being used to fight the wind, and they wanted to fight against the direction change, that could have created flex/vibrations that were amplified by the time they reached the lens.

Thanks for the replies guys. I have the gimbal back from Greg, and built up the rig and it is still doing the same drift. I checked on my own how the level was facing all different degrees like Jerry suggested. It goes out of level as soon as I pan. I decided that somehow the centre alignment of the gimbal must out; but Greg had just checked it with a five second drop time and it was fine. I never even considered the PRO top stage not lining up with the XCS post. I will get to work on that next. Thanks for that Richard, I appreciate it. Off to the garage to get the plumbers tape.

Thanks Rich, it's a pro, with AB's and I don't feel any shifting.

I can balance up my PRO/XCS rig perfectly, as it is stationary, sitting level fore to aft and side to side. When I check my drop-time (3 seconds), the rig does not swing down in a straight line, it wants to swing ovals from side to side. If I spin the rig to check dynamic balance it spins like a top. I have sent my gimbal to Greg Bubb at XCS to be serviced and checked, and he has assured me that there is nothing wrong with the gimbal. Has anyone ever encountered this before with their sled, where the rig balances horizontally with the post vertical, but the balance horizontally goes out as it is dropped from 90 degrees?

WALTER KLASSEN BACK-MOUNT VEST Universal #299 FOR SALE Vest is a year old, has done about a dozen shots and is in mint condition. Is set up with a 2” drop-down arm. Comes with all spare parts, tools, pads and spacers. Was bought for $6400.00CDN in May 2011, and is for sale for $4000.00 USD/CDN. Fits and operator that is 6’- 6’5” Waist is set for 32” – 36”, but I have the spacer to change it to a 36” – 38” waist. I will also send the vest to Walter for inspection and name plate change before shipping. Contact: brad_c@sympatico.ca

WALTER KLASSEN BACK-MOUNT VEST Universal #299 FOR SALE Vest is 6 months old, has done about a dozen shots and is in mint condition. Is set up with a 2” drop-down arm. Comes with all spare parts, tools, pads and spacers. Was bought for $6400.00CDN in May, and is for sale for $5500.00CDN. Fits and operator that is 6’- 6’5”(has longer back for taller person) Waist is set for 34” – 36”, but I have the spacer to change it to a 36” – 38” waist. Contact: brad_c@sympatico.ca