Ben Semanoff

This goes between a Klassen Harness and it’s carbon fiber arm.  Reasonable offers entertained! 

Not sure where they originally came from, but they are intended for 1.580” & 1.685” post sizes.  They pair with included fork.

Used to turn a v-lock receptacle into a place to mount or rig accessories.  

Sold

Hi… I have top and bottom plates for a practice cage.  Made from aluminum.  Drilled for posts threaded for 1/4-20 screws.  Buy your desired height posts from McMaster pre-tapped for 1/4-20 screws and you have yourself a practice Cage.  Selling for the cost of the raw aluminum… (2) plates at 8” wide x 12” long x 1/2” thick each.  $90 total plus $9.00 for shipping.  

Ever wanted to she your own full body harness and fall arrest system… well now you can.  This is my personal harness… used sparingly and never been involved in an accident or fall.  If you know any grips looking to grow their safety inventory… pls send them my way.  Has been kept in climate controlled building.  Great condition.  

Sold

Used - in decent condition! $50 + $9 shipping. 

Adding to the list… lightweight aluminum electronics boxes I fabricated… currently empty… but originally housed gyro inverters.  Clearances for xlr connectors, lemo 0B, and power switch.  Dovetails allow for stacking and for sliding onto Tiffen style plates or the bottom of Ultra/Master sleds. 

Updated list with items marked sold:

1. SOLD carbon fiber erector set.

2. SOLD custom case that turns into two trays 

3. SOLD Battery plates...(5) AB Gold mounts, (2) AB to V-Lock, (4) V-lock plates, and (2) AB Gold male plates.

4. Lemo connectors. Avail… see list above 

5. Ken-lab 24v inverter (guts only).  I used this inside some custom electronics.  Think they run about $100 new.  

6. Some still avail…  I have a few cases avail.  They are on eBay... here's the link.  https://www.ebay.com/usr/tophatprod happy to take anything down and make a deal.  

7.  Have two Watson sensors for tinkerers.  Also on eBay. https://www.ebay.com/usr/tophatprod

8. (Interested Parties) 3A Gimbal 

9. 3A Dovetail plate

10. One Sold… Preston compatible micromos & some slip rings.  

11.  F-Stop single channel 900GT with an fStop remote transmitter that uses a Preston iris knob as its controller. 

12.  (Interested parties) I have some heavy geared head wheels.  Not sure compatibility.  Gold color.  

13.  Have some pelican parts (latches and replacement handles) contact me if interested.  Not much value in this... happy to toss it in with something you buy.

14. Telefinder / Cinefinder - have an old carbon fiber video finder.  Its basically an antique.  Comes with a PV and Arri lens mounts.  

15.  Low Mode Handle Clamp

16. MDR-2 to Ultra/Master Bracket

17.  Paralinx Tomahawk Kit - 1x Transmitter, 2x Receivers & an antenna array in a case (pictures coming)

18.  2x Paralinx brackets

19. SOLD Gorelock Docking Collar

20. (Interested parties) Stand Cart Hangar 

21. SOLD Cheese plate

22. pelican dividers 

Adding to this… pelican dividers avail.  Want to sell them as a lot… here’s a list and pics.  
 

28x 4”W with folded flap at top

25x 4”W by 5”H

3x 5.5”W x 3”H

9x adjustable 4-7”W x 5”H

2x 3”W by 3.5”H

1x 3.25”W x 5”H center Velcro 

Large Case Divide 6.5”H x 20.5”W

OK went through my connector and cable inventory and here's what I have lying around.  I put in some pricing... but I'm eager to get this stuff out the door and give it a new home... so feel free to make an offer.  

 

 

Connectors - Used with pig tails (50% less than new)

• AB x 2
• 2pin Lemo-Style off brand… like FGG.0B $20
• Lemo FHG.0B 4pin Right Angle $35
• 6pin Lemo-Style off brand… like FGG.0B $20
• Lemo FGG.0B 7pin x 7pc avail $20
• Lemo FGG.1B 3pin $20
• Lemo FGG.2B 7pin (crimp style) x 3pc avail $35
• Lemo FHG.2B 7pin Right Angle (crimp style) x 2pc avail $75
• Lemo FGG.2B 10pin $35
• Fischer 3pin (RS) x 2 pc aval
• Fischer 11pin
• Lemo PHG.0B 2pin (female) - great for making 2pin extension $20
• Lemo FJG.3B 8pin female (F35 power connector) $50
• Lemo FFA.1S 2pin Hermaphodite $20

 

Connectors - New (20% less than new)

• Lemo FGG.1B 6pin (crimp style) x 3 avail $30
• Lemo FGG.2B 3pin (solder style) $45
• Lemo FGG.2B 7pin (crimp style) x 4 avail x $55
• Lemo FGG.2B 10pin (crimp) $65
• Fischer 5pin x 2
• Lemo FGJ.1B (Red Power - female - solder) $35
• Lemo EGG.2B 7pin (chassis mounted - crimp style) $45
• Lemo EGG.2B 10pin (chassis mounted - crimp style) x 2 avail $45
• HRS 4pin Female Chassis Mounted Connector (crimp) x 2 avail $5 (only when buying other stuff)
• HRS 4pin Male Cable Mounted Connector (crimp) $5 (only when buying other stuff)
• Lemo PHG.0B 2pin (female) - great for making 2pin extension $25

 

 

Used Connectors - No cables (50% less than new)

• Lemo FGG.0B 4pin (solder) x 3pc avail $20
• Lemo FGG.0B 5pin (crimp) $20
• Lemo FGG.0B 6pin (solder) $20
• Lemo FGG.0B.7pin (solder) $20
• Lemo FGG.1B 2pin (solder) x 2pc avail $20
• Lemo FGG.1B 3pin (solder)  $20
• Lemo FGG.1B 4pin (solder) $20
• Lemo FGG.1B 5pin (solder) x 2pc avail $20
• Lemo FGJ.1B 3pin Female (solder) x 2pc avail $25
• Lemo FGG.2B 5pin (solder) x 5 avail $30
• Lemo FGG.2B 12pin (solder) $35

 

Cables Available (lengths approximate): (50% less than new)

• 4pXLR to 4pHRS 12v 2' Long - $25
• 4pHRS to Coaxial DC (originally for redbyte) 6' (2 avail) - $20
• 4pHRS to Coaxial DC (orginally for redbyte) 6" Long - $20
• 4pHRS to Coaxial DC (orginally for redbyte) 12" Long - $20
• 4pHRS to 6pHRS (originally for modulus) 2' Long (2 avail) $30
• Preston Serial Cable - 3p Lemo to 9p Serial $35
• Preston Hand Unit Command Cable - 5p Lemo to 5pin Lemo - LONG cable... think its about 25' $50
• 2p Lemo to AB - 18" $35
• Ultra 3p Lemo to Panavision Power 3p Hermaphodite 18" - $75
• Ultra 3p Lemo to Red One Power (6p Lemo) - $75
• Ultra 3p Lemo to 4p 12v XLR 18" - $45
• Small HD DP7 AC Power Adapter (might work for other Small HD monitors) $70
• AB to Small HD 6pHRS Female 36" (3 avail) $60

Cables Available (lengths approximate):

• 4pXLR to 4pHRS 12v 2' Long
• 4pHRS to Coaxial DC (originally for redbyte) 6' (2 avail)
• 4pHRS to Coaxial DC (orginally for redbyte) 6" Long
• 4pHRS to Coaxial DC (orginally for redbyte) 12" Long
• 4pHRS to 6pHRS (originally for modulus) 2' Long (2 avail)
• Preston Serial Cable - 3p Lemo to 9p Serial 
• Preston Hand Unit Command Cable - 5p Lemo to 5pin Lemo - LONG cable... think its about 25'
• 2p Lemo to AB - 18"
• Ultra 3p Lemo to Panavision Power 3p Hermaphodite 18"
• Ultra 3p Lemo to Red One Power (6p Lemo)
• Ultra 3p Lemo to 4p 12v XLR 18"
• Small HD DP7 AC Power Adapter (might work for other Small HD monitors)
• AB to Small HD 6pHRS Female 36" (3 avail)

Contact me with reasonable offers.  

Here are the motors and gears I have.  They are compatible with mdr2s… can’t speak to their compatibility with mdr3/4.  Each motor new is about $300.  Happy to entertain offers.

Adding a Mitchell cheese plate to the mix too.  1’ x 1’

More photos

Hi All... have a bunch of stuff avail for sale.  Have pictures for some, but feel free to reach out with questions etc.  Its all used... please feel free to make an offer on anything.

1. I have an interesting carbon fiber erector set... if you're into prototyping or have a use.  It was used to build the prototype head for the SuperFlyCam but since decommissioned and disassembled.  Pretty cool. See pics.

2. I have a custom case that turns into two trays that can hang off the leg straps of an American stand.  Used to use it instead of a cart. Must be an American stand with the narrower leg straps, and it comes with a special collar that you install on the stand to capture the trays.  Comes with foam that's cutout to accommodate batteries, and the other tray works great for brackets.  Also included is a push bar for the stand (assuming you have wheels on it) so you can push the stand around.  The push bar has a flight pin to allow it collapse.  See pics.  

3. Battery plates...(5) AB Gold mounts, (2) AB to V-Lock, (4) V-lock plates, and (2) AB Gold male plates.

4. Lemo connectors. I have a ton of them used and new. If interested please let me know!  Can breakout a list and/or send picts.

5. Ken-lab 24v inverter (guts only).  I used this inside some custom electronics.  Think they run about $100 new.  

6. I have a few cases avail.  They are on eBay... here's the link.  https://www.ebay.com/usr/tophatprod happy to take anything down and make a deal.  

7.  Have two Watson sensors for tinkerers.  Also on eBay. https://www.ebay.com/usr/tophatprod

8. 3A Gimbal 

9. 3A Dovetail plate

10. Also have a bunch of Preston compatible micromos & some slip rings.  

11.  F-Stop single channel 900GT with an fStop remote transmitter that uses a Preston iris knob as its controller. 

12.  I have some heavy geared head wheels.  Not sure compatibility.  Gold color.  

13.  Have some pelican parts (latches and replacement handles) contact me if interested.  Not much value in this... happy to toss it in with something you buy.

14. Telefinder / Cinefinder - have an old carbon fiber video finder.  Its basically an antique.  Comes with a PV and Arri lens mounts.  

15.  Low Mode Handle Clamp

16. MDR-2 to Ultra/Master Bracket

17.  Paralinx Tomahawk Kit - 1x Transmitter, 2x Receivers & an antenna array in a case (pictures coming)

18.  2x Paralinx brackets

19. Gorelock Docking Collar

20. Stand Cart Hangar 

 

 

 

Hi y’all.. just a quick follow up... please no inquiries at this time regarding breaking up the package.  Thanks.  

Hi All... this may be premature, but I wanted to get it out there on the market and on peoples radar.  I’ve been slowly forging ahead in my transition to a directing career, and at some point in the next 6months I would likely be selling my entire kit... And more!  I’m not looking for a quick sale, and I’m open to a lease to own scenario as well which some young operators might be interested in.  In particular my gear will be sitting unused in my shop through the end of April.  So if you’re a competent, and trained young operator looking for your first rig... this could be right for you.  

In addition to the equipment list below, I have a significant investment in tools and parts for making cables.  I’d like to include it all in the sale, along with anything else I have that I will be unable to make use us moving forward!

And it’s probably important to know I live about an hour north of Philadelphia.  No pictures yet... but at some point!  

Here’s what’s in my package:

• Ultra 2 Sled
  • Tilt Stage
  • Wireless Trim
  • Brand new case
  • Whales tale tool
  • Tons of Cables
  • 1lb & 2lb Bottom Weights
  • Alexa Steadicam Adapter Plate
  • Beefy Dovetail Plate
  • 3x Dovetail Plates
  • 15mm Dovetail Bracket & Rods (x2)
  • Rain Covers
  • 3x Monitors
    • HD Ultrabrite
    • 2x DP7 Pro w/ Artificial Horizon
• G70x Arm
  • Fixed socket block
  • Arm / Rain covers 
  • Arm Posts (6”, 8”, 12” & 18”)
  • J-Bracket
  • F-Bracket (ultra 2 style) 
• Klassen Harness with
  • Perfect fit for 5’8” and 34” waist... but should have tolerance either way
  • Regular Side Operator drop down arm
  • Extra Set of Klassen Pads (useful on hot days)
  • Klassen AKS
• Wave (great unit and working condition)
  • Balancing Weights
  • 3x Betz receiver Plates (for use on heads etc)
  • Cables
• Garfield Bracket (mounts for Mitchell or Speedrail)
• American Stand with Wheels
• Gorelock Dock System
  • Balancing Dock
  • Magliner Dock
  • 2x Gorelock Rings 
• Antlers
• Gyro Kit 
  • 3x KS4
  • 2x Custom Inverters
  • Brackets, Cables and AKS
• Batteries 
  • 12x IDX HL9 Batteries (need re-cell or replacement but will get you started)
  • 2x IDX Battery Quad Chargers 
  • IDX to AB adapter x2 (so you can use AB Batts on the Sled)
• Backstage Shotsaver Rickshaw w/ Brand New Dune Wheels
• Compact Custom Steadi Cart
• Preston System
  • 2x Custom Lightweight MDR-2 
    • Both in lightweight 3D printed housings
    • Built in interface cable electronics so no more unwieldy interface cable.
  • HU3
  • Single Channel HU
  • DMX1 with PAM
  • DM2 with PAM
  • Heden Motor
  • Tons of Cables and AKS
• Misc
  • Butt Dolly
  • Various handheld gak
  • Dana dolly, seat and parts
  • Practice Cage
  • Spare Sled Case
  • Sled Bed for Truck
  • Handheld Pad & AKS
  • Various Plates, Brackets, Etc
  • Hirose Crimp Tool & parts
  • Lemo Crimp Tool & parts
  • Windscreens x 2
• 3x High Density Plastic Pallettes for shipping gear.

Im selling a lightly used set of Mitomo 6x6 True ND filters. All in great shape. Just not using them as much as Id like. Originally purchased for just over $7000, and open to serious offers. Will be taking pictures shortly.

Bunp

Selling a used Paralinx Tomahawk System. Cosmetic signs of use, but in good working condition. Kit includes:

 

Pelican Case

1x SDI Transmitter

2x Transmitter Antennas

2x SDI Receivers w/ Gold Mounts

5x Brand New Receiver Antennas

2x Used Receiver Antennas

1x Brand New Panel Antenna + Jumper Cables

2x 5/8 Mounts

Programing Remote & Cable

2x 2pin Power Cables

2x P-Tap Power Cables

2x BNC Cables

1x AC Power

 

Asking price is $6500, but I will entertain serious offers. Payment can be made via check (with 5-day hold), PayPal (buyer pays any fees), or Zelle. Buyer pays 2-day or faster shipping, and youll have 48hr to test and inspect.

Here are some photos. Serious offers welcomed!

I have pics... email if interested.