Dominic Napolitano

Preston was sold.

I have a very nice two channel setup with many brackets and cables for most cameras and lenses. It is an MDR1 with updated firmware. The transmitter has been upgraded with an omnishot system to use the little Sony batteries that last forever. I have the Hill bracket system with both 5/8" and 15mm arms. I have a PRO bracket and a great clamp on base for other applications. There is 10 focus rings. There is a remote iris extension (hardwire) for pulling iris separately from the transmitter. I have a nice water-resistant modular 51 bag for storage or transport and the cables and misc is stored in a great cordura organizer. This is a well cared for system that has never failed me. If you have any questions or would like more details please call me.I have attached some pics and an inventory.  Preston FIZ MDR1 (with the latest firmware) s/n 1234  Preston Handset s/n 2058  Preston transmitter s/n 49117  Preston Hardwire Remote Iris control w/ cable  2 Preston FIZ motors s/ns 602 w/3/4” gear and 603 w/1/4” gear  Gears  2ea 64pitch gears  1ea 48pitch gear  1ea 32pitch gears  1ea Fuji/Cannon gear  Preston Cinema Systems Fast charger w/ 2 batteries  Omnishot systems battery adaptor  1 Charger  2 batterys  1 ea. 7.2v 1500 mAh.  1 ea. 7.2v 2600 mAh.  Hill Bracket system  15mm arm  5/8” arm  2 rosette motor adaptors  2 standard motor clamps  1 extension motor clamp  Panavision style articulating modular follow focus bracket  Panavision style modular follow focus bracket  4” iris rod bracket 19mm-15mm w 5/8”adaptor  3” iris rod bracket 19mm-15mm  Clamp on MDR platform  PRO style MDR bracket  Cables  5ea. Motor cables  1 rt.angle to straight connectors  3 rt. Angle to rt. Angle  1 straight to straight  1 Arri 3pin 24vpower cable  1 Arri 3pin command  1 Arri 11pin command  1 Panavision command  1 Sony/Genesis command  1 PRO 12/24 power  1 Panavision style Accessory(command) splitter  1 FIZ 12v 4pin MDR power cable  1 FIZ 24v 2pin lemo (Panavision accessory) cable  1 FIZ hardwire handset to MDR cable  Antennae  3 Transmitter  2ea. 1”  1ea. 3 ½”  2 Receiver  1ea. 1”  1ea. 3 ½”  Fuses 2ea. 125v ½ amp  Fuses 2ea. 125v GMW ½ amp  10 ea. Focus marking rings  1 modular 51 water resistant bag  1 cordura organizer with 10 zipper envelopes (for cables etc.)  1 padded shoulder strap for handset. I APOLOGIZE THAT I AM UNABLE TO UPLOAD PHOTOS. I HAVE NOT YET FIGURED OUT HOW TO DO THIS. IF ANYONE COULD EXPLAIN HOW THIS IS DONE I WOULD GREATLY APPRECIATE THE INFO

Could someone please explain how to attach photos to a post?

If you send me your email I will send you some pictures and more info.

If you would like to see all of the pretty pictures that I took and was unable to post I will send them to your email address.

I have a very nice two channel setup with many brackets and cables for most cameras and lenses. It is an MDR1 with updated firmware. The transmitter has been upgraded with an omnishot system to use the little sony batterys that last forever. I have the Hill bracket system with both 5/8" and 15mm arms. I have a PRO bracket and a great clamp on base for other applications. There is 10 focus rings. There is a remote iris extension (hardwire) for pulling iris separately from the transmitter. I have a nice water-resistant modular 51 bag for storage or transport and the cables and misc is stored in a great cordura organizer. This is a well cared for system that has never failed me. If you have any questions or would like more details please call me. Dominic Napolitano (661)270-0317