Evgeniy

On the basic plate of the transmitter, the thin crosspiece between legs of the microcircuits, at all not fixed by glue, at once is appreciable. The capacitor on a plate is fixed by temp-glue and at once is appreciable, how wires are inaccuratly soldered to connectors and not protected by isolation or by tubes. The red light-emitting diode (that it displays - we and have not understood, probably timecode) is simply pasted in the body, its contacts are bent and are not isolated. Plates of the transmitter are made very well and accurately, on automatic manufacture, and only separate components of the non-standard form or necessary for adjustment are soldered manually. But unpleasantly amazes installation of wires on connectors. Testing of the transmitter was carried out as follows: household tuner PHILIPS with the monitor has permanently been established, and the transmitter was at the moving operator with the camera. The maximal distance on which received a stable picture, has made 167 m that is very satisfactory at such antennas. If it is interesting to you, look more on Modulus-gavno Best Regards, Evgeniy

Right after purchases of the monitor we have noticed, that the glass protecting the screen, fails inside of the case about one of corners. As at various evolutions of the monitor there were handicaps of the image and characteristic sounds were distributed, that inside something dangles. At work in the street at the raised humidity there were additional handicaps on the image. As the LED on the forward panel of the monitor never worked. Mike has disassembled this monitor and is below shown, that he there has seen and that has been made. After purchase of the monitor we have noticed, that the glass protecting the screen, fails inside of the case about one of corners. When we have disassembled the monitor have seen, that as the reason for this the nut of the fixing screw, which has jumped out of the body, has served. DECISION: with the help of the specialized glue we have fixed a nut in its aperture then it was possible to fix protective glass reliably. At connection of the second monitor or recorder (play back) to this monitor we have noticed, that brightness and quality of the image noticeably fall. In documents on this monitor we saw, that the coordination and an outcome of an input and an output is declared. Appeared, that the input and an output are connected in parallel without any agreeing devices. Is it normal? Let's pay your attention that in this assembly company Transvideo till now sells this 8.4" monitor. We not so strongly were revolted with these problems, if this monitor would not be production TRANSVIDEO and this monitor would not cost 3651 $ at distributor Dedo Weigert Film GmbH in Moscow (it almost 50% costs of one of last models of car Peugeot). After carrying out of the mentioned above works and as additional gluing of strips of a bilateral adhesive tape on perimeter of a protective glass, the monitor started to work without noise and there is no problem at various evolutions of the monitor. As now bright red light on the forward panel displays power of the monitor. There was one problem: at switching between various videos inputs the monitor sometimes "hangs" and it is necessary to disconnect it and anew to power. After studying the monitor 8.4" we were frightened and have disassembled 5" the monitor. It appeared is produce much more accurately and better, with it at us never arose problems and we till now successfully use it. As it is possible to notice, that all directors were dissatisfied with the monitor 8.4" and preferred to use other monitor with higher resolution. At this monitor really very low resolution for such sizes. This document is not an anti-advertising and is not directed against the company, as we like production Transvideo and we continue it to buy and use, and we shall use only production of these company, as we are and shall stay admirers Transvideo, but we wanted to show our supervision to other users. This document should not be criterion at purchase of the monitor, as it simply our supervision. If it is interesting to you, look more on TRANSVIDEO-gavno Best Regards, Evgeniy

Can somebody answer?

Hi Guys! Has Somebody already buy BOXX? I am afraid of a situation... (http://www.steadicamforum.com/forums/index...4&hl=benz&st=15) I plan to arrive in London after January, 15th and I ready to buy it. Is BOXX in stock? All the best. Evgeniy

I had no contact to Ben Fisher. I till now have not received that equipment which has paid. I did not undertake while any actions as has been very borrowed by work. It is necessary to tell, that Benz works very well. It is insulting, as Ben Fisher's behaviour does not allow to conduct the further cooperation. Evgeniy

Dear Chris, Thanks for your letter. At me the same problems, as well as at you. From me you receive any help and support. Evgeniy Moscow,Russia

Hi all, First I thank Yuri Kawana for opening of this theme. I too have a Ben Fisher story. This story is very long: there was a many letters, many phone calls and visits of my friends to office Unitcine. For brevity I shall tell only facts in issue. If you interests in full correspondence with company Unitcine (167 pages) I am ready to send you this document. On March, 7th, 2004 I have written Unitcine, that I wish to buy BENZ 4000 (control Focus, Iris, Zoom). During the further correspondence the list of the equipment has been coordinated. On March, 22nd, 2004 I have received QUOTE from Ben Fisher. On April, 14th, 2004 I have received INVOICE on BENZ 4000 (control Focus, Iris, Zoom) without motors from Ben Fisher. On April, 28th, 2004 I have completely paid BENZ 4000. On May, 5th, 2004 Ben Fisher has confirmed reception of money. On May, 10th, 2004 Ben Fisher informs me, that has started manufacture of my order and specifies serial numbers of devices. On June, 21st, 2004 I receive INVOICE on accessories to BENZ 4000. On October, 15th, 2004 I have completely paid accessories to BENZ 4000 which I have not received by that moment. On October, 26th, 2004 Ben Fisher has confirmed reception of money. November, 10th, 2004. Since this day I constantly write letters Ben Fisher, which general sense "How is my order? When you will send me BENZ 4000?". Constantly I receive answers "this week" and "ASAP". On February, 3rd, 2005 Ben Fisher sends commercial invoice ¹ 2135 also asks it to check up. In this list was not BOA - LOCK kit and one cable which I have paid earlier. I have written about it. On February, 10th, 2005 Ben Fisher informs, that has sent my order. On February, 27th, 2005 I receive a box, in which BENZ 5000 motor controller/driver (control Focus, Iris), handset only for Focus and a part of accessories. In a box laid forged invoice ¹ 2035 where other equipment and other cost was specified. Later, having investigated BENZ 5000 motor controller/driver, I have learned, that the socket for connection of motor Iris is not involved, that is it BENZ 5000 motor controller/driver only Focus. On February, 28th, 2005 I write, that have not received the BENZ 4000 but if I shall receive it I guarantee payment BENZ 5000. I receive the answer: " We encountered further problems with your 4300/5800 that we could not explain - so I sent you a 5100/5600 to keep you going - we have now traced the compatibility issue between the 4300/5800 and will send out the remaining cable and units in the next week or so - much before March 18! " On March, 4th, 2005 Ben Fisher suggests to send instead of BENZ 4000 BENZ DIGITAL. I agree. On March, 9th, 2005 I apologize before company HEDEN as has not paid sent INVOICE on motors of that till now at me was not present BENZ 4000. I receive the answer: " Dear Evgeniy, Iam so sorry to hear about your problems with Unitcine Ltd and Ben Fisher. Unfortunately this has been our worst experience with a company during our 41 years of existens. I could not believe in my wildest dreams how this humble guy Ben Fisher has totally destroyed everything he tried to build up. You are not the only who has paid in advance and haven´t recieved what ordered. Shame on Ben Fisher!! We have ended production of our own control units and we are know only concentrating in supplying digital and analog motors for professional Film & HD lenses. I would recommend you to take a look at the C-Motion Lens Control system at www.cmotion.at. This is by far the best lens control system available today (in my opinion) If you are looking for a cheaper system the Chrosziel Mag-Fox is an excellent system. www.anthrazit-design.com Also you can have a look at www.mk-v.com they are coming out with an all new system supporting our analog motors with digital control. We have to date sold more than 10.000 motors world-wide. Our analog motors are compatible with: ? Chrosziel Genio, Fox, Mag-Fox & Aladin ? Preston Microforce V+F2 ? MK-V ? Bartech Focus Device ? Seitz ? WRC ? Belarus? Our digital motors are compatible with: ? C-Motion ? Preston Cinema System FIZ ? Chrosziel Aladin ? Service-Vision Scorpio Thank you very much for the photos you sent me it was very interesting to look at them and to se you in person! I will let you know as soon as we have recieved your transferred funds. Best regards Magnus ***************************************************** Heden Engineering Co. P.O. Box 102 431 22 MOLNDAL, SWEDEN Delivery address: Flojelbergsgatan 14 431 37 MOLNDAL, SWEDEN Tel: +46-31-272110 Fax: +46-31-278191 Website: www.heden-engineering.com E-mail: magnus@heden-engineering.com SkypeIP: servomotors *****************************************************? On March, 22nd, 2005 Ben Fisher suggests to buy BENZ digital motors. On April, 24th, 2005 my friend has left in UK. He with the English lawyer visited office Unitcine, but Ben Fisher disappeared. After a while he have found also he has given the promise to send full BENZ 4000 till May, 30th. TILL NOW I have not received PAID BENZ 4000. All documents and correspondence at me are collected in one folder, that completely confirms fault Ben Fisher. Now we negotiate with the English lawyer for the reference in police and criminal prosecution of the swindler. Best regards, Evgeniy Moscow, Russia