Quaid Cde Baca

M1 tilting top stage WITHOUT the volt brain. I'm keeping that :) I upgraded to the M2 with built in volt brain immediately when it came out and haven't needed the M1 since. It is vastly more robust and stronger, but all my jobs lately have been within the weight range. It's been neatly wrapped and stored in my closet since January 8th, 2020 $5,000 USD PLEASE EMAIL: QuaidCdeBaca@Gmail.com LA located and sale preferred, but will ship domestically - buyer pays shipping.

Hey Sandy, did this sell?

Hey guys! It's out! The slimmest, and lightest, fixed 3rd battery mount for the M1 sled base, WITH power passthrough to the sled. This is a solution to the existing heavier and larger, 3rd battery mounts. So here ya' go! Specs: • Gold Mount & V-Mount available. • Genuine Anton Bauer gold mount and V-Mount plates. • Mounts fixed to the M1 base bottom cheese plate. • Independent power supply to the sled (24v supply boost too). • The thinnest and lightest M1, 3rd battery mount available. • Genuine 0b size right angle lemo connector, Canare cable, and strain relief. • All mounting hardware included. Price: $550 Email me for sales and inquiries at: QuaidCdeBaca@Gmail.com *LA located. **Will ship at buyer's expense (international too).

Hey guys! It's out! The slimmest, and lightest, fixed 3rd battery mount for the M1 sled base, WITH power passthrough to the sled. This is a solution to existing heavier and larger, 3rd battery mounts for the M1. So here ya' go! Specs: • Gold Mount & V-Mount available. • Genuine Anton Bauer gold mount and V-Mount plates. • Mounts fixed to the M1 base bottom cheese plate. • Independent power supply to the sled (24v supply boost too). • The thinnest and lightest M1, 3rd battery mount available. • Genuine 0b size right angle lemo connector, Canare cable, and strain relief. • All mounting hardware included. Price: $550 Email me for sales and inquiries at (I do NOT check my inbox on this site): QuaidCdeBaca@Gmail.com *LA located. **Will ship at buyer's expense (international too).

Selling my Preston kit with 3 motors and a BRAND-NEW MRD-4 (never rented out, never seen a job, straight out of the box, and tested only). Gear has been recently serviced and updated by Preston. Just want to get out what I put into it. $15,500.00 Email me for inquiries: Quaid Cde Baca @ Gmail .com Located in Los Angeles: Atwater Village, CA. Will ship at buyers expense/ LA pick-up preferred. More photos on the Facebook ad here: https://www.facebook.com/groups/forsalecameraassistantaks/permalink/3487467861323970/?sale_post_id=3487467861323970 Hand Unit 3 Hand Unit 3 Rubber Hand Grip Hand Unit 3 Batteries Hand Unit 3 Battery Charger Hand Unit 3 Battery Charger Power Cables Hand Unit 3 Focus Rings Hand Unit 3 lemo to VGA software cable Jerry Hill HU Rain Cover Pouch MDR-2 G4 Blue Dot Controller MDR-2 to MDR-1 Control Cable Adapter MDR-1 to Alexa 3-pin Run/ Stop Cable MDR-2 to Panavision Run/ Stop Cable MDR-2 to Hand Unit 3 25' Command Cable MDR-2 to XLR-3 pin Power Cable MDR-2 to P-tap Power Cable MDR-2 Power/ Run/ Stop to Alexa Y-cable MDR Mounting Paddle MDR-4 Controller MDR-4 Wooden Camera X mounting bracket MDR-4 to P-Tap power cable MDR-4 to Arri 3-pin Run/ Stop MDR-4 to Sony HIROSE Run/ Stop (2) DM-1 Motors (1) DM-2 Motor Uni-Clamp PAM Kit 15mm PAM kit PAM Motor Mounting Bracket Right Angel to Right Angel Motor Cable Right Angel to Straight Angel Motor Cable Pitch Gears Custom Foam Cut-out Case

Selling on behalf of a friend. Please contact him below for info. LA located. Asking USD $1,900 OBO Contact:zacharymprice4@gmail.com

Thats one mighty fine beauty right there. Killer package! <3 If you're selling because you're doin' what I think you're doin', then keep doin' what you're doin'. ;)

SOLD!

Garfield hard mount: Speed rail mount Mitchel mount base Mitchel tie down Tiffen socket block (for both arms) LA located (Atwater Village) for pick up or buyer pays shipping. Email for inquires: QuaidCdeBaca@Gmail.com

JUST GIVE HIM THE CAMJAM SHAWN! Kidding, it's a sweet level. I wonder if you can just make one to snap onto new yokes and other yokes?

$6500

*Posting for a friend* Selling my well cared for G-50 arm. Recently serviced and is up to tiffen standards and ready for a new home. Has some cosmetic scratches on the outside but nothing major. Would like to sell in LA but am open to selling worldwide, buyer pays shipping. $6250 Arm is in LA **Email for inquires: jamesmarin8888@gmail.com

$6750 And single sided V mount sandwich plate is included now.

V mount sandwich plate now included

2000 kit for sale Upgrading my personal wireless and posting up my trusty Teradek Bolt 2000 1:2 kit. Just returned from Teradek for a service check up. A clean system. - (1) TX - (2) RX - (3) P-Tap power cables - (2) AC power cables - Case - (2) coiled BNC - (1) thin line BNC - (3) mounting screws - (1) 1/4”-20 to baby pin mount - 1:2 Teradek Bolt case *AB 'sandwich' plate NOT included. $7,000 USD Email: QuaidCdeBaca@Gmail.com