Rich Kickbush
-
Posts
11 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Rich Kickbush
-
-
Reduced to $850 also Cam Jam bracket for this monitor to suit full Cam Jam system available separately or with monitor.
-
-
-
-
Zephyr with
A-30 Arm
Standard Vest
Sled with V-lock
Extra 12/24V Vlock plate for bottom dovetail
Frederic Sturm's Enhanced Gimbal Wrap
Frederic Sturm's Monitor Yoke mount
XLR 4 pin out
Balance post
Low mode bracket.
Standard Zephyr weights
Steadicam Original Thermodyne case
Original Manual
- Batteries and foldup docking stand not included but could be available for a local buyer
- Only thing that needs attention is the original Marshall monitor. Ideal as a backup, it can sometimes take on funky colors when it warms up. I would recommend replacing it with one of the much newer cheap high NIT monitors now available, the Marshall can't really cut in 2022. Other than the monitor, in excellent condition, thanks to Covid.
Located in Melbourne, Australia but happy to ship.
$7,300 USD
-
Fawcett Exovest for sale - excellent condition. Hardly used in the last two years due to Covid, but stored well.
Has all current upgrades, comes in Steadibag
Currently located in Melbourne Australia but happy to ship international with trusted payment method.
$4K USD
photos to follow
-
Hi Adi, different feel to a PRO or Tiffen, you feel that the weight is connected at the front obviously, but the rigidity of the Klassen vest means its still distributed evenly and into the back/hips. Only downside is that you can't change the socket height easily, but I do remember seeing a riser block on someone's GB vest as more permanent height mod. I think its real advantage is to quickly switch on set to a much narrower body profile for tight spaces, without having to change out to a completely different vest. You do need to reverse the socket block on your arm tho, easy with an aircraft pin fitting.
Rich
- 1
-
Front and back mount in the same vest. If you're not familiar with this design, it was made at the request of Garrett, who liked the support but wanted to keep the front mount option.
I'm 5'11, 190lbs 34-36In waist, and it fits well, could fit someone bigger or smaller fine also - I used to run the bladder only a little inflated.
Leather and sockets still in very good condition.
Comes with standard arm and vest bags from Klassen, and spares kit pictured.
Located in Australia but no problem to ship worldwide.
$3800 USD or the equivalent in your currency.
Email is richkick@gmail.com
-
-
Selling a Hybrid GPI PRO sled. Ideal for backup / lightweight running rig / 1st sled.
GPI Donkey Box 1. In great condition. Single short plate included.
GPI 1.5" Post with SD Electronics. HD cable included, ready for upgrade - (I didn't get around to it).
Base is Gen 2 PRO Bayonet.
Jerry Hill Anton Bauer 12V/24V Battery Base - voltage readout/SD video distribution/walking light/recorder output. Wired for 8 pin monitor out.
Marell DIgital level for SD - wired for 8 pin in/out.
24" 8pin-8pin cable.
#Spare Jerry Hill Base with additional voltmeter. Both bases work fine. 2nd one is a backup for the field that I've never needed to go to.
SD on board recorder x2 kit - AV500
Decimator HD-SD converter (not pictured)
PRO to 4 pin XLR power out included
Basic monitor mount included - I also have a CamJam Quattro available in a separate listing.
No gimbal - selling XCS gimbal available separately.
Note - Gorelock available separately
Looking to sell as a complete sled at this point.
US$4500 + shipping.
-
Price drop - $5K. Open to reasonable offers, and selling handles individually if a buyer doesn't want both.
-
-
Hi Brad, I have a Klassen vehicle mount I may be selling. Would that work for you?
-
-
HANDSET AND MOTORS -
2 channel Bartech Handset with Iris slider
2x Digital fSTOP 2.1 Bartech receiver with short 90 degree antennas.
2x Heden M21VE-L Digital motors with 0.4, 0.5, 0.6, 0.8 Gears
CABLES - MOTOR
3 x 7pin digital motor cables (2+1 backup)
POWER CABLES
1 x 3pin Arri power
1 x D-tap power
1 x PRO power cable
RUN/STOP CABLES -
1 x Arri 3 pin
1x RED Epic
1x C300
2x Panavision with 24V inline Regulator power/run stop
2x Arri 11pin Fischer power/run stop
ACCESSORIES -
3x Aluminium Handset rings
3x Plastic Handset markup strips
Spare 900Mhz antennas -
2x short straight
2x short 90 degree
2x long range
1x Stubby handset
$5700 OBO
Email for more info and photos cameraworksvr@gmail.com
-
Has anyone got one of these kicking around? Cheers
-
-
Heden M21VE-L, the later model with the higher torque.
Pristene, never used, comes with standard 32P 0.8 gear.
$1500 OBO
-
2 channel Bartech Handset with Iris slider
2x Digital fSTOP 2.1 Bartech receiver with short 90 degree antennas.
2x Heden M21VE-L Digital motors with 0.4, 0.5, 0.6, 0.8 Gears
Cables -
2 x 7pin digital motor cables
1 x 3pin Arri power
1 x D-tap power
Run/stop -
1 x Arri 3 pin
1x RED Epic
1x C300
2x Panavision with 24V inline Regulator power/run stop
2x Arri 11pin Fischer power/run stop
PRO power cable
3x Aluminium Handset rings
3x Plastic Handset markup strips
Spare 900Mhz antennas -
2x short straight
2x short 90 degree
2x long range
1x Stubby handset
Around US$11K new
US$6500 not including your choice of shipping.
Pics to follow.
-
Would anyone have either a focus or iris transmitter only that they are wanting to part with?
Cheers
Rich
Richkick@gmail.com
-
Including shark fin antenna for the same price - Modulus 3000/NTSC Hermes/Shark Fin - $550
-
Still two of these left.
Brand new, still in packaging, 4 originally bought for a 3D project that didn't happen.
With 4 gears, compatible with standard Preston 7 pin cables.
$1800ono each
Rich
-
-
Bump. $550 + shipping for both
DP7 Pro SmallHD monitor with built-in Horizon
in Steadicam Marketplace - For Sale
Posted
Ie Cam Jam yoke, but I could be open to selling the full Cam Jam mount.