Jon Myers
-
Posts
31 -
Joined
-
Last visited
Posts posted by Jon Myers
-
-
Having a problem with the level. When the monitor is powered up the level will not stop bouncing back and forth. Does anyone have any ideas??
Jon Myers
-
Thank you for your interest .... the vest is sold!!!!
-
I'm posting a vest for a friend.
Model 3A.
Updated 2 Inch buckles.
Cross back straps.
All in working condition.
Looking for $800
Please Email for pics.
hartsteadicam@yahoo.com
-
Hi guys this is Jon Myers, I make the Moses Pole along with a friend of mine. @ Richard Romero we do make a 2" for your XCS. @ Robert Starling, the entire unit is made of 6061 aluminum, two Stainless Steel bolts and two steel rolled pins. We do know that it wobbles but there's no need to worry, nothing will break. I've supported my 270lbs on it and it was fine, it you stick it between two chairs and stand on it yes it will probably fail but that's not how it was designed to be loaded. The two "plugs" where the pole comes together go up inside about 1 1/2". The wobbling is a tolerance thing but not between the two plugs but between the machined edge of the plug and the pole. I don't know why he did it this way but the guy we had put them together drilled the holes in the pole and then the hole in the plug at two separate times and then put them together, instead of putting them together and drilling and pinning all at one time. Since it wasn't a structural safety thing he wouldn't redo them. MY personal phone number is engraved on the side of the fork and I haven't heard about ANY problems but one and I fixed that as soon as I could. Eric didn't I give you one???? Maybe I didn't, I'm not sure but I know you didn't buy one from us and I don't remember getting any back with problems stated. If anyone has one and would like me to stop the wobble please give me a call. Thank you for your time.
Jon Myers
818-282-5274
-
Let me know if you're still looking for those cables. I might have them. I'll have to go into my storage unit and look. If I don't have them I'll look and see if I have the connectors to make them for you. Please let me know asap. I'm going to my storage on Tuesday the 17th. Thanks.
Jon Myers
818-282-5274
-
NEW condition Modulus 3000 and Sony TU-1041U Receiver with CTI antenna. $2500.00 for both. The Modulus has only been used a couple of times. No cables. If you have any questions please call or email me.
Jon Myers
818-282-5274
JonMyersDP@me.com
-
batteries are sold
-
-
I have 6 150W/H LiIon batteries with a Quad and Dual charger. You can go to www.batteries4broadcast.com to see the specs on them. They have Anton Bauer Gold Mounts on them. I'm asking $1500.00. I'm not sure but I think one of the charging stations on the dual isn't working... so you can charge 5 batts at once instead of 6. To buy this new it would be $3000.00. These are the same batts that Gregg Bubb was talking about. I also have a bunch of Dionic 90's, Hytron 50's and Trimpac's that need to get recelled that I'm selling.
-
Everything is still up for sale!!!!
-
EFP sled and Red spring arm for sale it's in excellent condition also has PRO 2 monitor bracket. 12V operation only. $10,000.00 6 150W/H Li-Io batts with quad and dual chargers. You can go to www.batteries4broadcast.com to see the specs. Anton Bauer Gold Mount on the batts, they will fit on EFP $1500.00. Walter Klassen back mounted vest is for someone that has about a 32" waist, never used on a job no sweat stains... Preferably someone in LA will buy it so you can try it on. $3900.00. I have more pictures if you're interested. Please call don't email unless you're out of the country.
Jon Myers
818-282-5274
JonMyersDP@me.com
-
-
I also have a spare microwave receiver for an MDR-1 for whoever buys Matt's system. It's good to have a back up. I'm asking $500.00 for it.
Jon Myers
818-282-5274
-
XCS Dovetail plate with 2 15mm rods. $275.00. I have a picture if you're interested.
Jon Myers
818-282-5274
-
Transvideo Cinemonitor lllA super bright with frame line generator. New for every thing was $4500.00. Asking $1800.00. Has 8 pin Lemo PRO monitor connector on the back. Cat griller for sale too asking $150.00 I can email you picures if you're interested. I also have a receiver for a Preston MDR-1 asking $500.00. If your receiver goes down you'll have to buy a MDR-2 if Preston can't fix it, good to have a back up.
Jon
818-282-5274
Joncamop@aol.com
-
I have several different chargers. The first one is a AB Titan Quad quad charger (It works with my Dionic 90's but I'm not sure about the HC's). Then I have a AB 2702 Quad charger (is not upgraded for Dionics, the upgrade is $90 at Band Pro). Then I have 6 150 watt/hour batts with 1 quad and 1 dual charger. If you go to www.batteries4broadcast.com you can see all the specs there. Everything is in 7.5-8 out of 10 condition. All the chargers are simultaneous except the 2702 it only charges one at a time. I also have a module that connects to the 2702 that charges 4 additional batts. The Modulus is pretty beat up looking but it works REALLY well, both of the channel knobs are missing. I think there's a place in Canada that will put new pots in with knobs for about $150 per knob but if you're getting them both done he might cut you a deal.
Titan Quad-$700.00 new at B&H is $1100.00
2702- $700.00 new at B&H is $1300.00
Modulus 3000- $800.00
6 Batts (gold mount)with chargers- $1600.00 new $3000.00 (cannot fly or ship these, LA sales only)
MDR-1 Receiver-$500.00
Jon Myers
818-282-5274
-
The Preston is sold... thank you.
-
The sled is sold. Thank you.
-
I'm selling my XCS Ultimate 1 sled. This is what you get
XCS Upper camera platform
XCS Gimbal with new style wrap grip
XCS New style post with 1.75 inner post
XCS Lower electronic housing Ser.#17
XCS Super Post New style with 1.75 inner post
XCS Monitor bracket
All of my camera power cables
Pelican case
The only scratches are from putting it on my shoulder to rest, other than that it looks brand new.
$25,000.00
If you have any questions please feel free to give me a call.
Jon Myers
818-282-5274
-
I will separate the pieces if you just want the handunit or motors.
-
Handset II
20 focus rings
4 batteries and charger
MDR-1
DM-1
DM-2
2 Motor Driver cables
Run/Stop cables
Panavision
Arri r/s and 11 pin
Moviecam
Sony HD
There are at least 2 if not 3 or 4 of each of the cables listed.
extra gears that will fit any video or film lenses.
12/24V converter
Extra MDR-1 Receiver
Brackets to mount zoom control for digital and analog.
Rain Gear for handset
$11,500.00 for everything. The handset is programed to work with the MDR-1... if you buy an MDR-2 just send in the handset to Preston and have them program it for the MDR-2 it takes about 10 minutes for them to do it. It was just serviced by Preston. Everything is in really good shape, normal wear.
Jon Myers
818-282-5274
Please email me at Joncamop@aol.com or call me. Thanks.
-
Sorry everyone the arm is sold!!
Jon
-
PRO arm for sale. 4 Black and 4 Blue springs. The only scratches are by the post from when you put the rig on your shoulder. Serviced by PRO and then has been in bag since. $18,500.00. US sales only unless you want to fly here to get it. Shipping not included.
Jon Myers
818-282-5274
-
Does anyone in the LA area have one of Howards sleds and his docking bracket with the 4 stage post?? If you do I was wondering if I could come by sometime soon and have a look at it. I just need to see how the sled sits in the docking bracket. Thank you.
Jon Myers
818-282-5274
Cinetronic Gen II level problem
in Monitors
Posted
Thank you guys for your quick and accurate responses!!!! That is exactly the problem.
Jon