Kenny Brown SOC

SOLD - thanks

SOLD

Sale pending

http://www.ebay.com/itm/-/191814566113?

Sale pending

Rencher Industries Intersex Plate

Never used. Cost $150 plus tax. I have 3 of T-studs but only 2 screws. You can buy more screws and see more information here:

https://mediablackout.net/collections/intersex-plate-kit/products/intersex-plate

Thanks

Kenny

Backstage Mag Vest Holder. Couple of years old in fine working condition. Doesn't fit Exovest though, so has to go. $50. In Los Angeles.

Thanks

Kenny

Hi

I've done a fair bit with this camera and it is generally pretty good. Have to put the battery on the back with 19-90's etc.

Another thing to note - when you're flying the 4K recorder on the back is that it doesn't mount very securely to the camera and has about one millions pins of contact to the body. So if you get an "I/O Error" plastered across your monitor - it's a show stopper. The recorder needs to be reseated and a bunch of menu items need to be reset as the camera seems to forget it ever had a 4K recorder. I know this is AC stuff but it's good to be careful with the back of the camera. For non steadicam stuff, we often used a long baseplate to stop the recorder ever hitting the ground (rocker plate, camera on a sand bag etc.

Cheers

Kenny

BUMP

SOLD - thanks

Anton Bauer P-Tap to Preston motor and Digital Micro-force Y cable. Can be used with any setup with a spare P-Tap, Red etc. $310 from Preston, barely used. $200 obo.

Kenny

LA

Arri (Alexa etc) Digital Microforce cable - 3 Pin Arri Y to motor and Digital Microforce. Barely used.

$200

LA

Don't know, but I have one that I need to sell. Will post some pics later this weekend if you're looking.

Cheers

Kenny

Me too.

Check if it happens when someone keys a radio next to you. My Ultra loses signal when that happens - I presume because of some poorly shielded cables somewhere in the chain.

Kenny

Exactly what I need. Will be ordering. Thanks

Sold.

Cleaning out the shelves - on ebay, no reserve.

http://www.ebay.com/itm/191183562335?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Bump $2500

Bump $500obo

Bump $3000

VHF Hand Unit upgraded to take Sony M-Style batteries and custom locking stops on the iris slider

MDR 1 – updated to recall settings after power cycle etc

Microforce

10 Rings

4 x Antennas

2 x Sony M style batteries (no charger)

1 x Run/Stop cable 4422 Panavision

1 x Run/Stop cable 4429 Canon

1 x Run/Stop cable 4424 Aaton

1 x Run/Stop cable 4430 Sony VTR

1 x Run/Stop cable 4439 Red Digital

1 x Run/Stop cable 4420 Arri

2 x Command to antenna cables and 1 x right angle plug

Microforce

1 x Microforce to MDR cable (short)

1 x Microforce to MDR cable (long)

1 x 2 pin lemo 12V Master to MDR Power cable

1 x 3 pin lemo 12/24V Master to MDR Power cable

1 x Anton Bauer P-Tap to MDR Power cable

2 x 5 pin to 5 pin jumper cables from hand unit to transmitter

Includes manual and Innerspace foam cut out for a Pelican 1600

This unit was recently serviced by Cramped Attic in Canada and is working perfectly.

$3800 obo

Thanks

Kenny

Modulus 3000 NTSC Transmitter with antenna and 6db attenuator

Serial No 008792

Power cables: 4 Pin Hirose x 2, 4 Pin Hirose extension, 4 Pin XLR x 2, 4 Pin XLR extension, Arri 3 Pin, Arri 11 Pin, Panavision 12v

Transvideo Pegasus TV Receiver

Power cables: 110v power supply, 4 Pin XLR, 6 Pin to 6 Pin Hirose jumper for power and video to/from Nebtec monitor

Nebtek NEB50VF 5” LCD SD Monitor

PAL/NTSC with image flip etc

Hoodman H600

http://www.bhphotovideo.com/bnh/controller/home?O=&sku=595127&Q=&is=REG&A=details

CIT Sharkfin Antenna

Various BNC video cables and adaptors

Pelican 1500 case with Innerspace custom cut interior

$600 obo

Available for pick up/shipping in Los Angeles

Thanks

Kenny

Hi there

I'd like one too, please add me to the list.

Thanks

Sent you an email - interested, PM me.

Cheers

Kenny