Brian Zaczek
-
Posts
21 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Brian Zaczek
-
-
Reduced $250
-
Purchased from https://rencherindustries.com/
The specs are in the picture below
-
-
- Cmotion Cvolution SOLD
-
Gorelock 2 SOLD
-
Great shape, Excellent for lightweight camera setups on big rigs and low mode swaps with two dovetails plates. It's built very solid 19mm rods can be swapped to different sizes.
$300 by paypal
Dimensions:
top/bottom plates 6"x 6" x .75"
space between plates 8.5"
Ships insured from Denver, Colorado
-
Excellent shape, built in over-voltage protection( www.lentequip.com )
$60 by paypal
Ships insured from Denver, Colorado
-
GPI Pro rigid socket adapter - $625 paypal
Silky bearings, Mechanically %100
Ships insured from Denver Colorado
-
Gorelock 2 with softcase, excellent condition, Mechanically like new, very light use(see pictures) - $850 by paypal
Ships insured from Denver, Colorado
-
M1 sled has sold.
SOLD:
Charger
Exovest
Pro Arm
Dionic HC batteries
Walter Klassen Vest
Paralinx Arrow-X
M1 Sled
FOR SALE:
Cmotion Cvolution FF kit REDUCED: $3,750.00 -
Paralinx Arrow-X has sold.
SOLD:
Charger
Exovest
Pro Arm
Dionic HC batteries
Walter Klassen Vest
Paralinx Arrow-X
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plates for Battery hanger. REDUCED: $27,500.00
(price is firm)
Cmotion Cvolution FF kit REDUCED: $4,500.00-
1
-
1
-
-
The Walter Klassen Vest has sold.
SOLD:
Charger
Exovest
Pro Arm
Dionic HC batteries
Walter Klassen Vest
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plates for Battery hanger. REDUCED: $27,500.00
Cmotion Cvolution FF kit REDUCED: $5,000.00
Arrow-X kit REDUCED: $1000.00 -
Jess,
I'm going to sell the sled complete. -
All Batteries have been sold.
SOLD:
Charger
Exovest
Pro Arm
Dionic HC batteries
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plates for Battery hanger. REDUCED: $28,000.00
Cmotion Cvolution FF kit REDUCED: $6,000.00
Arrow-X kit REDUCED: $1000.00
Klassen Vest REDUCED: $3000 -
Price Reduced
*Location has changed. Gear for sale in Denver Colorado
SOLD:
Charger
Exovest
Pro Arm
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plug-and-play battery plates. REDUCED: $28,000.00
12 Dionic HC batteries(<10 cycles) 10 months old, have Vitec Invoice. Will sell all 12@ $175.00/battery.
Cmotion Cvolution FF kit REDUCED: $7,000.00
Arrow-X kit REDUCED: $1200.00
Klassen Vest REDUCED: $3000
*Location has changed. Gear for sale in Denver Colorado -
*Location has changed. Gear for sale in Denver Colorado
SOLD:
Charger
Exovest
Pro Arm
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plug-and-play battery plates. REDUCED: $30,000.00
12 Dionic HC batteries(<10 cycles) 10 months old, have Vitec Invoice. Will sell all 12@ $175.00/battery.
Cmotion Cvolution FF kit REDUCED: $7,500.00
Arrow-X kit REDUCED: $1500.00
Klassen Vest REDUCED: $3200
*Location has changed. Gear for sale in Denver Colorado -
SOLD:
Charger
Exovest
Pro Arm
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plug-and-play battery plates. REDUCED: $31,000.00
12 Dionic HC batteries(<10 cycles) 10 months old, have Vitec Invoice. Will sell all 12@ $225.00/battery.
Cmotion Cvolution FF kit REDUCED: $8,500.00
Arrow-X kit REDUCED: $1800.00
Klassen Vest REDUCED: $3400 -
Thanks everyone for the interest in the arm. I had a pending sale going into this past weekend.
SOLD:
Charger
Exovest
Pro Arm
FOR SALE:
M1 w/ Volt gimbal. V-mount and Goldmount plug-and-play battery plates.
12 Dionic HC batteries(<10 cycles) 10 months old, have Vitec Invoice. Will sell all 12@$265/battery.
Cmotion Cvolution FF kit
Arrow-X kit
Klassen Vest
-
-
All equipment has been looked after tirelessly. All equipment works/functions as manufacturer intended. Serious Buyers only. I will have limited access to email but I will respond to best offers first.
Equipment located in Miami.
PM offers and questions to steadiczek@ g mail. comSteadicam M1
sled ordered new from tiffen in 2016, volt gimbal added 2018, tilting stage, 2-stage post, choice of V-mount or Goldmount battery plates for battery hanger, Transvideo s-xbl HD6(2000 nits brightness), tiffen locking dovetail camera plate, both Volt cables for mustashe box, lemo to 4 pin, specialty volt gorelock, M1 manual,
Condition: Aesthetically in excellent condition with signs of very light use. mechanically this sled is flawless. All functions work as new. One small scratch on monitor screen from gimbal handle during docking(see picture). No issues operating/viewing with monitor.
Asking 32k
https://www.dropbox.com/sh/j94x6zkahcgi21g/AACb26mcCmsyZ4vtjuu6eUBXa?dl=0
Pro titan arm4 canister version without pro logos, 2 black canisters, 4 blue canisters, XCS mid section 16", 10", 5" XCS posts and standard fit 2" flush-fit XCS post. 5/8th pro arm posts: 12", 10", 8” posts with pro gimbal 5/8" post end, 8" pro arm to archer-size solid XCS post. 7" pro arm to 7/8" full-size tiffen gimbals, 2x rain gear for arm, 2x gold pro wrenches, 3x allen wrenches and spares kit for arm. Soft bag case for storage
Condition: aesthetically well looked after, mechanical function is excellent,
Asking 14Khttps://www.dropbox.com/sh/45et1ooyktx5azv/AABCzufWHDf5YkhgmYuJvbfpa?dl=0
Cmotion Cvolution Kit
Advanced handset with iris slider and zoom module, Camin 4m, 1xHeden m21, 1xHeden m26, cables - 2x right angle motor cables, 1x straight motor cable, 2x power cables,
Camera cables: RLA-1, RF5-1, AER-1, RER-1, RCA-1, CPC-3
4 handset batteries and charger, quick release neck strap
Heden gears: .8 pitch wide, .6 pitch, .5pitch and .4pitch gears
Cvolution handset/camin 4m spare antennas, spare camin quick-release shoe. Rs-232 update USB adapter
soft storage bag included.
Condition: aesthetically is very good condition, mechanically all components and pieces function as intended by cmotion - no exceptions.
Asking 9k
https://www.dropbox.com/sh/cfqu9xeemg3imd6/AAAijOg_x7JqhdX9N5XAzQSha?dl=0
Arrow - X
SDI transmitter w/ ¼’ paralynx cage mounting bracket, SDI receiver with paralynx V-mount plate and paralynx ⅝” stand mount,
P-tap to 2pin transmitter power cable, SDI cable, pelican storage case, and programming remote and IR cable for remote.
Condition: Excellent aesthetic/mechanical condition.
Asking 2k
https://www.dropbox.com/sh/6ubbf4evfb1jrw8/AACz3lakQOza9c5FuO_n2izqa?dl=0
Steadicam Faucett exovest
Condition: Aesthetic condition almost new with very light use. Excellent mechanical condition - functions as new,
Asking 4.3k
https://www.dropbox.com/sh/i6lqowy4b3wfu1f/AABKa3LrWLSonFUA-LD-wG8xa?dl=0
Klassen deluxe vest(more rigid than flex vests with leather trim), Klassen carbon arm,
Fits sizes 5’8” to 6’2” with 30” - 36” waist
left/right/straight switchblocks, storage bag, extra ⅜” mounting hand screw for klassen arm to vest, spares kit for vest: straps and ratchets, purchased on steadicamforum as new,
Condition: Aesthetically in very good condition with some signs of light use. Mechanically flawless works as new.
Asking 3.5k
https://www.dropbox.com/sh/ldfg0xe23nwvyps/AACd3Lq12ljuMt_N2g0nds-Ya?dl=0
New in box: 12 Dionic HC and Anton Bauer LP4 Goldmount 4 battery simultaneous charger
Batteries and charger ordered from vitec July 2018, Condition as new in box, Less than 10 charging cycles(never worked only topped off).
Asking $300/Dionic HC battery(new in box). I will negotiate for sale of all 12. LP4 Anton Bauer Goldmount 4 battery simultaneous charger(new in box): Asking $400
https://www.dropbox.com/sh/apzht6hzi6fbv15/AADekZ8LyGIXvOdTXLhZhF7Za?dl=0
All equipment has been looked after tirelessly. All equipment works/functions as manufacturer intended. Serious Buyers only. I will have limited access to email but I will respond to best offers first.
Equipment located in Miami.
PM offers and questions to steadiczek@ g mail. com -
Hi Walter, I'm looking for the knob solo al la carte.
-
Does anyone have one of these?
-
All items have been sold.
-
I received some questions about the condition of different components. I'm reposting here in more detail:
The stage works as good as it ever has. No extra play, unintended sliding or vibrations. Stage trims precise no extra play, movement or vibrations. Dovetails have almost no wear on the original matte finish. No fitment issues due to dovetail wear. No issues securing dovetails to stage. Camera payload is secure at any angle (tilted up in standby or tilted down at ground).
The arm works as good as it ever has. It is smooth through the entire boom range. No extra movement, no strange noises, no loose hardware on the linkages in the arm. Lift knobs are smooth, threads are solid and adjustment is precise.
The sled works as good as it ever has. No issues on the sled. No abuse or stress on the carbon post under the stage from docking. All the Tools-free adjustments secure tightly and work as intended. All the power connections on stage and base, the HD-sdi line, and monitor input/outputs work as intended. No issues throughout any of these connections.
Zephyr sleds had some different options. SD and HD wiring option. This is wired for HD. 3 choices for monitors from tiffen: SD, HD, and HD high-bright. This zephyr is HD high-bright. This system is v-mount. No issues with either battery hanger mounting batteries. No issues securing either battery hanger to the base. All v-mount batteries are original purchased with zephyr. They all charge fully. I've never had issues with them. Dual charger packs inside zephyr case.
Mk-v Aluminum camera cage
in Steadicam Marketplace - For Sale
Posted
SOLD