
Gareth Manwaring
Premium Members-
Posts
38 -
Joined
-
Last visited
Everything posted by Gareth Manwaring
-
Hello. I have recently taken these units off of a job. Gave them a good once over, updated all the units to the latest firmware, paired them up and tested them. There are minor scratches and hits to each unit. The arrays still work but they took the most damage and have been patched up a little. Set 1 $12,000 Case 1TX SN 199601064 V 3.1.9 1RX-1 SN 199701764 V 3.1.9 1RX-2 SN 199701765 V 3.1.9 2 different TX brackets 4x TX antenna straight 2x TX dome antenna 10x RX antenna 7x array Cables Array (cracked on the top) Yoke 2x 750 pin bracket Wooden camera: 1x nato lock kit 1x v-lock base station 1x ultra arm mini monitor mount 2x p-tap to 2-pin 1x 2-pin to 2-pin 1x 3-pin to 2-pin 2x hdmi to hdmi 2x short BNC 2x USB 2x AC to 2-pin Set 2 $12,000 Case 3TX SN 199601065 V 3.1.9 3RX-1 SN 199701766 V 3.1.9 3RX-2 SN 199701767 V 3.1.9 2 different TX brackets 3x TX antenna straight 2x TX dome antenna 10x RX antenna 7x array Cables Array (cracked on the bottom right with tape over it) Yoke 2x 750 pin bracket Wooden camera 1x nato lock kit 1x v-lock base station 1x ultra arm mini monitor mount 2x p-tap to 2-pin 1x 2-pin to 2-pin 1x 3-pin to 2-pin 2x hdmi to hdmi 2x short BNC 2x USB 2x AC to 2-pin 2x plug adaptor bags Set 3 $12,000 Case 2TX SN 199601063 V 3.1.9 2RX-1 SN 199701762 V 3.1.9 2RX-2 SN 199791763 V 3.1.9 2 different TX brackets 4x TX antenna straight 2x TX dome antenna 10x RX antenna 7x array Cables Array (cracked on front and bent) Yoke 2x 750 pin bracket Wooden camera 1x nato lock kit 1x v-lock base station 1x ultra arm mini monitor mount 2x p-tap to 2-pin 1x 2-pin to 2-pin 1x 3-pin to 2-pin 2x hdmi to hdmi 2x short BNC 2x USB 2x AC to 2-pin Asking $12,000/set OBO. Free shipping in the US or pickup in NYC. There are lots more pictures of each unit so let me know if you need to see more. You can contact me at garethmanwaring@gmail.com IMG_4075.HEIC IMG_4084.HEIC IMG_4090.HEIC
-
Pro VZ Gimbal for sale
Gareth Manwaring replied to Ben Van Cleave's topic in Steadicam Marketplace - For Sale
Just checking if this is still available? -Gareth -
Steadicam vest
Gareth Manwaring replied to Nestor Salazar's topic in Steadicam Marketplace - For Sale
Nestor, where is the vest currently located? -Gareth -
For Sale: Tiffen G70X Arm
Gareth Manwaring replied to Anders Holck Petersen's topic in Steadicam Marketplace - For Sale
Hello. I’m very interested. Please email me to work out the sale. garethmanwaring@gmail.com -Gareth -
Hello team! I was wondering if anyone has used any of these starter kits? Such as the: Steadycam Areo https://www.bhphotovideo.com/c/product/1270532-REG/steadicam_a_hdab15_aero_sled_with_a_15.html?gclid=CjwKCAiA27LvBRB0EiwAPc8XWXQcxU6PKq-Y6Z24Ntv_X-RqMF6ENkzhvcXBo6v8IV7R-AcoxTE2bhoCA6oQAvD_BwE&lsft=BI%3A514 Would this be a good place to start if you wanted to start wearing a rig and getting used to steadycam? Thanks for your help, Gareth
-
Preston DM2 Motors
Gareth Manwaring replied to Rob Carlson's topic in Steadicam Marketplace - For Sale
Do you know when they were last serviced? -Gareth -
Wave1 For Sale
Gareth Manwaring replied to Torquil Fleming-Boyd's topic in Steadicam Marketplace - For Sale
Interested. Is there a way to see some pictures? -
HU3 Preston Hand Unit
Gareth Manwaring replied to Dennis Laine's topic in Steadicam Marketplace - For Sale
I’m interested. Is this still available? -Gareth -
Ultra2 Vest for Sale
Gareth Manwaring replied to Laura Eraud's topic in Steadicam Marketplace - For Sale
Is this still available? -
For Sale: Steadicam Ultra 2 Package
Gareth Manwaring replied to Brett Froomer's topic in Steadicam Marketplace - For Sale
Vest and all. Let me know if anything changes. Thanks. Garethmanwaring@gmail.com -
For Sale: Steadicam Ultra 2 Package
Gareth Manwaring replied to Brett Froomer's topic in Steadicam Marketplace - For Sale
Is this still available? -
Hello, I have two motors for sale. The first is a DM4 in good condition with a 64 pitch gear that only fits this motor. Asking $1,500.00 The second motor I have is a Hedén Motor, M21VE, which is in poor condition. Works but needs to be fixed up. It comes with a 0,5 and a 0,6 pitch gear. Maybe someone might want to take it on if interested make an offer. Any questions please let me know. -Gareth garethmanwaring@gmail.com
-
For sale Preston MDR2 G4 recently serviced with latest firmware & software update+ following cables: 1 MDR-2 upgraded to G4 with blue dot s/n #1451 I have recently upgraded to a MDR3 and don't need this unit anymore. Power Cables: 1x MDR2 Power to 3 PIN XLR cable long (Red) 1x MDR to Ptap (Anton Bauer 12v) (Red) 2x MDR2 Power to Arri 3-Pin cable (Red) 2x MDR2 power to 3-pin Lemo Panavsion (red) 1x MDR2 Power 4 PIN LEMO (Steadicam PRO Style Sled) (Red) Camera on/off Cables 2x MDR2 Arri 3-pin cables (Blue) 1x MDR2 to 4-pin Hirose Run Cables (Sony F55)(Blue) 1x MDR2 to Arri 12v (11 pin Fischer)(Blue) + Preston Data cable (picture not included) Price: $3,000 including free shipping within the US. Contact: garethmanwaring@gmail.com Attached Images
-
HU2 for sale - US
Gareth Manwaring replied to Gareth Manwaring's topic in Steadicam Marketplace - For Sale
These items have sold. -
HU2 for sale - US
Gareth Manwaring replied to Gareth Manwaring's topic in Steadicam Marketplace - For Sale
Bump -
HU2 for sale - US
Gareth Manwaring replied to Gareth Manwaring's topic in Steadicam Marketplace - For Sale
An update about the unit. It is an original HU1 with the upgraded boards of a HU2 and transmitter. Price drop: $1,250.00 or best offer. -
HU2 for sale - US
Gareth Manwaring replied to Gareth Manwaring's topic in Steadicam Marketplace - For Sale
Bump.