Jump to content

Stephen Consentino

Sustaining Members
  • Posts

    20
  • Joined

  • Last visited

  • Days Won

    2

Stephen Consentino last won the day on January 11 2018

Stephen Consentino had the most liked content!

Reputation

3 Neutral

About Stephen Consentino

Profile Information

  • Rig
    Tiffen G1 Volt
  • Location
    New York, NY

Contact Methods

  • Website
    http://
  • Skype
    film.maker.me.com

Recent Profile Visitors

3246 profile views
  1. KS-5 Gyros (x2) with Power Supply Two Ken-Lab KS-5 Gyros with Custom mounts and 12Volt Power Supply. Work well and in good physical condition. Power Supply is 12volts input with a 4-pin XLR connector and capable of powering both gyros. Includes multiple long and short power supply cables. Email me at film.maker@me.com Asking $2,000 OBO.
  2. Ken- I don't have that but I do have a 1.5" Hill docking bracket and collar if it's of interest to you. Thanks Stephen Consentino cell: 914-837-0120 film.maker@me.com
  3. I would be too Chuck. But from their website it looks like it is something better suited for a fixed installation (studio) environment and not so much a quick location setup but I could be wrong. To also respond to Alec about the ability to hear comtek audio on the HME's it is possible in several ways and I have done both. If you have a MB300 base station (most people don't but mine does) you can wire and audio feed into the basestation (e.g. take a comtek receiver and wire out of the headphone jack to the basestation). The other option is to do a similar thing and wire a comtek to an HME belt pack's mic input and then just cue the belt pack on anytime you want to hear that audio. Only drawback is that everyone hears it on their HME and it takes up one of the TX slots available so it can limit the ability of some people to duplex talk on the HME headsets. The third option is to have an audio person of a company like Comtronics make a custom splitter cable for a belt pack that would allow you to hear both feeds in your headset. I know my 1st AC uses a similar splitter on his walkie headset to hear the comtek audio.
  4. So my beloved Rocksteadigear soft sided vest case had its zipper fall apart on the inside. I think they are long out of business. Is that correct? Anyone have another source for such a case or a good option? Would prefer a soft case that I could also put my arm case in also. Thanks Stephen Consentino
  5. FOR SALE Cam-Jam Quattro Universal Monitor Arm with integrated yoke I am selling my Cam-Jam Quattro Universal Monitor Arm with integrated yoke. It is less one year old and looks brand new. It was on my rig that I just sold and my new rig already had one on it so I don’t need this. The Cam-Jam Quattro Universal Monitor Arm is without a doubt the best monitor arm I have ever used. It is rock solid, light-weight and completely vibration free thanks to it’s four point mounting system. It allows you to infinitely adjust your monitor position and instantly go from high to low mode positions all with no change in balance. You can use the arm with almost any monitor from Small HD, Transvideo, Boland, Odyssey, Ikan, Cinetronics, Nebtek or Marshall with the addition of a monitor mount from Cam-Jam (not included here - cost is $50-$100 depending on model). I also have (for an additional $50) an Universal Adapter for backup monitors that allows all monitors with a 1/4”-20 threaded hole on the bottom to be mounted to the Quattro Monitor Arm, not using the yoke. With it’s 2” diameter clamping ring, you can mount the Quattro Arm on most any stage of any Steadicam rig as custom adapter rings are available for any post diameter (I am including one 1.5” and one 1.9” adapter rings). For more info see the Cam-Jam website at: https://shop.cam-jam.de/product/quattro2-monitor-arm-with-yoke/ The price new is 1,230.00 € (about $1,450 US) with the two adapter rings. I am asking $1,100.00 If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses. Thanks, Stephen Consentino Email: film.maker@me.com Cell: 914-837-0120
  6. I have a brand new (worn about 5 times) ARRI Artemis vest and a Tiffen G-70 X for sale. Please call or email me. Stephen Consentino email: film.maker@me.com cell: 914-837-0120
  7. MK-V NEXUS V4 SLED / TIFFEN G-70X ARM / ARRI ARTEMIS VEST MK-V NEXUS STEADICAM SLED This is the flagship of the line and MK-V’s newest version of the steadicam sled and includes the following: - 2" Deluxe 4-stage Post capable of being extended for super-low mode or super-high mode shots - Deluxe V4 Gimbal (super smooth) with interchangeable post handles capable of being used with any diameter arm post - D-Box: V4 Dual HD Electronics w/ dual HD Outputs and high power feeds - J-Box: V4 with Dual HD-SDI in/out - Betz Topstage (vibration-free, built-in bubble level) - Sony PVM741 OLED HD Monitor (stunning off-angle viewing with near 180 degree horizontal and vertical viewing angle - V4 Monitor Arm - Monitor Power/Video Cable - 2 x Standard Dovetail plates - 15mm bars and dovetail plate holder - 1 x Dual and 1 x Single battery module with V-lock battery plates (able to easily switch for Anton Bauer) - V4 Docking Station - Full Power cable pack (Arri, Panavision, 12V XLR, 24V XLR power cables) - Pelican 1730 Case MK-V Sled as listed above: Sells for $29,000. ASKING $19,500. ARRI ARTEMIS VEST Brand New. Worn a couple of times. Lists for $5,000. ASKING $3,900. TIFFEN G70-x ARM Beautiful Iso-elastic arm. Includes short post. Looks and feels like new. Just four years old. ASKING $13,000. I am willing to sell the sled, arm and vest separately, but prefer to sell it as a complete package which I will discount to $34,500. This is a $50,000.00+ package that is nearly new. I also have IDX chargers and batteries that I can sell with it as well as a Kenlab Gyro package. This is an amazing ready to go package. You will love it! If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses. Thanks, Stephen Consentino Email: film.maker@me.com Cell: 914-837-0120
  8. I have a brand new (used twice) Artemis vest if you are interested. PM me at film.maker@me.com Stephen Consentino
  9. I am an authorized Teradek and Paralinx dealer and would be glad to offer you an excellent deal on a brand new Sidekick version 1. If you are interested please email me at film.maker@me.com. Thanks, Stephen Consentino
×
×
  • Create New...