Stephen Consentino
-
Posts
22 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Stephen Consentino
-
-
Cartoni Sigma Fluid Head for Sale.
Similar in style to the O'Connor 2575C but with a greater camera capacity (up to 100 lbs-more than enough for a Platinum w/ 11:1 zoom and 1000' mag) and less expensive. Beautiful design and Italian craftmanship. Digital Counterbalance, Pan and Tilt resistance read-outs. Geared fore-aft adjustment with knob (much easier to adjust than on the O'Connor head). Includes front short handle, long pan handle, universal eyepiece leveler support (works w/ Panavision or Arri), mitchell base, Euro-type quick release plate, A&J custom hard case. The head is in excellent condition and was recently lubricated and cleaned by Cartoni USA.
Great head to include in your rental packages for the Steadicam/B-Camera Operator. You'll pay-off this head in just 2 or 3 movies. This is over $9,500 worth of gear if purchased new.
For more info go to: Cartoni Sigma Website
Price $5,000.00
Contact Stephen Consentino
email: film.maker@me.comphone: 914-837-0120 -
Ramon- Saw on the forum you were looking for a top stage. Jerome Fauci has a Betz that he just listed.
Stephen
-
Patti-
They look great, but do you have anything for the 1610, 1620, 1630 cases? This is the common size for Preston systems. Pelican makes their 1609 Lid Organizer which fits all three models but isn't that useful for many things.
thanks,
Stephen Consentino
-
System has SOLD! Thank you to everyone who responded. Loving my new MK-V sled.
-
MK-V NEXUS V3 SLED
About two years old in beautiful condition. Howard Smith from MK-V has gone through the sled and verified its condition and is willing to speak to any prospective buyers about it.
Sled includes the following:
- 2" Deluxe Four-stage post capable of being extended for super-low mode or super-high mode shots
- Deluxe V3 Gimbal (super smooth) with interchangeable post handles capable of being used with any diameter arm post
- V3 Monitor Arm
- Monitor Power/Video Cable
- Sony PVM740 OLED HD Monitor (stunning off-angle viewing with near 180 degree horizontal and vertical viewing angle
- V3+ D-Box and J-Box with HD-SDI in/out
- Betz Topstage (vibration-free, built-in bubble level)
- 2 x Standard Dovetail plates
- 15mm bars and dovetail plate holder
- 1 x Dual and 1 x Single battery module with V-lock battery plates (able to easily switch for Anton Bauer)
- V2 Docking Station
- Full Power cable pack (Arri, Panavision, 12V XLR, 24V XLR power cables)
MK-V Sled as listed above: $27,000
PRO-GPI VEST
Also in excellent condition. Near new, just over two years old. $4,100.
TIFFEN G70x ARM
Beautiful Iso-elastic arm. Includes short post. Looks and feels like new. Just two years old. $16,800.
I am willing to sell the sled, arm and vest separately, but prefer to sell it as a complete package which I will discount to $45,000. This is a $60,000.00 package that is nearly new.
Okay, so I know everyone is going to start asking why I am selling, so to pre-answer, I am selling my current Nexus to buy a new Nexus sled. I need a business write-off. I still love the MK-V. This is just a financial decision my accountant said I should make.
If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses.
Thanks,
Stephen Consentino
Email: film.maker@me.com
Cell: 914-837-0120
- 1
-
I bought one of Jeremy's Rickshaws and used it on a commercial a few weeks ago and it was FANTASTIC!! Smooth, fast and most of all super sturdy. Slapped my Garfield Mount from Klaussen Designs (the best Garfield mount for the money) and I was up and running (actually I was up and sitting!!) I'll post some pictures when I get a chance.
In the mean time, if you are in the market to rent one rather than buy one (it certainly isn't a small item to store for a city dweller) I have one available for rent and conveniently available for pick-up any day between 9a-5p in Astoria, just outside New York City. Call, text or email me.
Stephen Consentino
cell: (914) 837-0120
email: film.maker@me.com
-
Karl-
I think I might have for sale exactly what you are looking for. Please privately email me at film.maker@me.com.
Stephen Consentino
-
I Need to Rent an AR (Alien Revoltion) for this Friday and Monday 12/7&12/10 in NYC. Does anyone own one that the would be willing to rent to me. I have a MK-V rig with V3+ Electronics.
Please call or text or email me.
Stephen Consentino
cell: 914-837-0120
e: film.maker@me.com
-
Ross, is the charger still available or did that sell with the batteries? How old is the charger?
Thanks,
Stephen Consentino
-
Angenieux Optimo 17-80 T2.2
FOR SALE $54,000.00 US.
GREAT SHAPE, t2.2, 2' min focus
1.5 years old
Comes with Duclos PANIVISION & PL (ARRI) LENS MOUNT (BOTH MOUNTS INCLUDED AND EASY TO SWITCH BACK AND FORTH).
Includes:
1 - METAL LENS CAP
1 - CARRY HANDLE
1 - Custom MASTER CASE
GREAT SHAPE Used rarely
Great for digital and Film
If interested please contact me directly at:
Stephen Consentino
email: film.maker@me.com
cell (NY - USA): (914) 837-0120
-
Dovetail what? Do you have a picture of what you're looking for? I have some EFP parts laying around, but I'm not sure what you're looking for.
Stephen
-
SOLD. THANKS!!
-
Dennis can you email me directly at film.maker@me.com with price and your contact info.
-
TB-6 Rain Cover in excellent (almost new) condition. Optically clear plexiglass screen cover. $75.00 plus postage.
Please email me at film.maker@me.com
Thanks
Stephen Consentino
-
Selling my cable, with 8 pin pro connector for power and HD, never used, made by Terry West.
Dennis-
Can you post a picture and price or email me at film.maker@me.com
Thanks
Stephen Consenetino
-
-
Jerry Hill / DeRose Garfield Vehicle Mount. Mounts to a standard Mitchell Base (Dolly, Hi-Hat, Etc.) or 2" or 1.5" pipe with included U-bolts.
Comes with a steel socket block (additional cost on Hill units sold now). Very good condition with perfect socket block, minor scratches on metal parts, perfect working condition. These sell for over $1,000 new with a socket block if you can find one.
Price $675.00
Please email me directly at:
cell: 914-837-0120
Thanks,
Stephen Consentino
-
FOR SALE: Hot Gears System for Panahead & Arrihead
Hot Gears Digital Remote System
ARRI and Panavision Motors.
System is in excellent condition and recently serviced and updated.
Has memory function to memorize and repeat one move (bloop light included).
Accessories:
1 x Underslung bracket for Panaflex Platinum
1 x Underslung bracket for Panavision Millenium Reg/XL
1 x Underslung Cage
1 x 100’ Command Cable
1 x 50’ Command Cable
1 x Run Stop Cables for Panavision & Arriflex Film Cameras
Pelican Case for Console and two motors.
Price: $25,000.00
Please contact:
Scott Tinsley
email: stinsley@nyc.rr.com
phone: 917-561-6419
Do not leave posts here. Photos to follow.
-
-
Don't forget, there's a reason there are no more UHF TV stations. The government is selling off the UHF band and guess what, NYC is the place that will be sold to first. Start selling your Modulus becuase I bet they are going to start cracking down on users!!
-
FOR SALE MK-V Hummingbird 6.5" Daylight Monitor
Monitor is in excellent condition with just minor scratches around the case. Screen is in perfect condition. See description below.
The All new V2 MK-V/Hummingbird LCD is the brightest daylight viewable LCD - sun hood not required. This monitor was designed specifically for ‘Steadicam™’ work. (PAL & NTSC - auto switching). This monitor does not really have a NITS rating as it is trans-reflective and the more light that hits the screen the better the picture.
This new V2 monitor has a 6.4″ (4:3) diagonal screen and 4:3, 16:9, 2:1 and user aspect ratios as standard. Built in frame lines, centre cross and border. Zoom in and out. Flip and reverse scan. And built in heaters for working in sub zero temperatures. Plus PRO compatible connections and built in Tally lights (for use with the V3 system).
The back box also has a battery input, so you can power the monitor off the sled with your MK-V battery module. There is also Video in & out BNC connectors and a 0b 4 pin transmitter output (12v & Video)
Asking $3,400
Please EMAIL OR CALL ME DIRECTLY. DO NOT LEAVE QUESTIONS or COMMENTS HERE!!
Stephen Consentino
email: film.maker@me.com
cell: 914-837-0120
-
FOR SALE GORELOCK 1 DOCKING BRACKET by Jerry Hill Products
Lightly used Gorelock 1 Docking Bracket fits all PRO, Ultra, Masters, Elite, EFP, 3A, & Glidecam rigs. I have one 1.580" docking ring which fits the Masters, Ultra or Elite sleds. If you have one of the other rigs listed you could just buy the docking ring from Hill Products. The dock is in near new condition as it was only used on my second stand. It lists for $485.00 new. I am selling it for $325.00.
Please contact me directly at:
Stephen Consentino
email: film.maker@me.com
cell: 914-837-0120 (NYC area)
-
Hi Stephen...I had the Boxx system out with me on "Supernatural" back in April and was impressed. We did encounter an issue of the TX not finding the RX but in the end the transmitted picture was incredible. I bought the IDX unit back in January and it has performed satisfactorily if you don't ask too much of it.
I'm still always trying for the best TX picture I can get. Can you let me know what kind of pricing you are offering on these units?
Regards,
Tim Moynihan
Rock Steadi Pictures Inc.
Rock Steadi Gear
rocksteadi@telus.net
Tim-
I cannot post prices here but I will email them to you directly. The issue you had is an easy fix. Simply select any of the 65 channels, set the receiver and transmitter to "Manual" mode on the same channel and you will not have this problem. Without a doubt the Boxx Meridian blows the IDX out of the water. In fact, it can even outperform a $80,000+ Linx system with a little setup effort and some high gain antennas.
Best,
Stephen
-
Stephenn,
on the feature you were shooting in NY, which R/x were you using? The broadcast mode or the portable R/x?
On all the YT clips I've seen so far, I've only seen the unit used with the Broadcast R/x. This R/x is vastly more costly than the portable R/x.
Lars-
Sorry for the delay. I'm on set alot lately and replying to posts from my iPhone is difficult. Always feel free to email me directly instead.
To answer, with properly set up and similar antennas, the broadcast and portable receivers will perform very similarly. I will be offering an antenna array for the portable unit or you can purchase 5.1-5.9Ghz antennas yourself and build your own to suit your needs. The main difference between the receivers is that the iris & tally control option is only available on the Broadcast receiver. I have a Broadcast receiver available for rent if you ever need it for this function or to use Full Telemetry (remote CCU control).
Best,
Stephen
Walter Klassen Vest for sale Brand New
in Steadicam Marketplace - Wanted
Posted
In case you missed it...this section is called "WTB-Equipment Wanted" not equipment for sale!!!!!!!!!!! WTB=Want to Buy. Please move the thread there.