Michael Alba SOC

Basically a standard def wireless set up sold separately or as a whole. modulus 3000 -pro Steadicam power / video cable -d tap power cable -2x 3 pin arri power cable -antennae -50db antennae $1300 Sony tu41 tuner with BNC Antenna connection upgrade for shark fin -remote controller -ports Brace fitter bag -power cables $200 Shark fin antenna $100 Call michael 3108017145

Great monitor used as a back up to my green screen, as well as during a few live TV productions with the picture in picture functionality. Steadicam upgrades: -day bright 1500 nits -8 pin Lemo power / video connector installed -Anton Bauer plate installed -Transvideo mounting bracket to pro Steadicam -three speed fan switch installed with quiet off position Ultra-Brite Direct Sunshine Display, All HDTV formats (720/1080, i/p/sF) LED Backlight for cool running but with very low power consumption DHD is HD/SD SDI-Digital (SMPTE 259M, 292, 296), Analog Analog (Composite Y/C, PC-VGA, YPbPr/YCrCb) Modes: EGA to WUXGA, NTSC/PAL/SECAM/NTSC4.43/PAL-M All 10-bit Digital Processing, 16.7 million true colors, 24 bit Aspect Ratio: 16:9, 4:3, 1.85 to 1, etc. Fully Adjustable Scans: H & V sizes, Position; Scan Reverse Digital Adaptive Comb Filters http://www.bolandcom.com/product/dhd8ldb-p/ Price $2300 call michael @ 3108017145 Los Angeles area

I would like to keep it together

14k price...

Sorry gen two you are correct! And yes

Selling a pro Steadicam sled w/ Donkey box 2 Vs gimbal Two stage center post Battery rack gen 3 (Anton Bauer) Monitor arm with two lengths No monitor or follow focus Michael alba 310 801 7145 Sorry picture is sideways can't figure it out?! I promise the horizon will be flat if you know what you are doing. Lol Cheers!

Great BFD Two Channel Steadicam System 1. 2x Transmitter Hand Unit w/ antenna 2. 2x Receiver w/right angle antenna, and straight stock antennas 3. M1 Motor w/case 4. M1 Gears (0.4,0.5,0.6,0.8-32p, 2x 0.8-32p(wide),0.48p 5. Rod Collets (5/8, 15 , ½) 15mm 6. CP SLD lens motor w/ all iris/focus gears, and mounting bracket 7. 3x Motor cables 8. Arri 12v power cable (3pin) 9. Arri 12v power cable (11pin) 10. 12 volt Panavision power cable 11. 2x Arri start/stop cable 12. 2x Panavision start/stop cable 13. Gimbal mount hard wire focus module remote 15. 3x Bartec / Pro sled power cable 16. 1x Bartec power link (powers both bartecs) 17. custom double receiver steadicam bracket for sled (tom gleason) 18. Single channel Bartec bracket for sled 19. 5 marking rings, 4 Marking strips 20. One pelican case (used condition) Great two channel system with all you need to run most cameras. This equipment has been a workhorse for me and has been well taken care of and serviced last fall with Jim Bartel. I have used this system almost exclusively on a Pro rig and its set up perfectly for two channel steadicam applications. I would like to keep the package together for the sale. $7000 obo + shipping & insurance, or I am located in Los Angeles for pick up as well. Thanks guys! Please contact Michael Alba 310-801-7145 mra1025@yahoo.com

just bought the pro monitor arm extension the other day $345... mike thanks for the recommendation on the boland monitor and all your help. i have been flying it for a few months now and totally dig it. a few small qualms i found are: i wish they had built the monitor a bit more weather proof the buttons and seams look a bit underprotected, and correct me if im wrong but i think all LCD monitors have a limited angle of view? i found i could not see the image at the end of a move i made where i had the camera horizontal to the ground. other than that absolutely great for the price!!! im trying to talk them into a software upgrade that includes a frame-line generator :)

-SLD 100 lens motor -w/ all iris focus gears, motor cable, and mounting bracket -accepts regular 5 pin lemo motor cable, for use with systems like the bartec. Motor is great working condition and has worked great for me for years. has been used but taken care of. A great starter motor! $1000 310-801-7145

hi everyone! i was wondering if anybody had info about running a two monitor setup on a pro rig for live tv . one program monitor and one camera monitor, now i know there is only one input at the top of the sled, maybe there is a way to mod a port on the junction box to send another feed down below. thanks guys michael alba