Justin Painter

Steadicam cables and parts are located in Chicago. Shipping for the cables,XCS transmitter bracket and docking rigs is $9.00 USPS Priority Post to the USA. I will have to check on Prices for out of the USA. I will have to check on prices for the docking bracket. Paypal is fine but you have to pay the 2.9% on the total. If you have B of A you can transfer money for free. I excepts checks but have to wait until the check cashes before sending the gear. 1. MKV to P tap Female – New $150.00 - Price $50.00 obo 2. MKV to XL-Platinum (small Lemo)- New $150.00 Price $75.00 obo 3. MkV- to Gold/ Millenium (Large Lemo) New $175.00 Price $ 4. XCS 24 V to Alexa/435- New $165.00 – Price- $75.00 obo 5. PRO/MKV/XCS to Bartech power –New $150.00 Price $50.00 obo 6. XCS/MKV/PRO to Hiroshi 5 pin Video tap- $25.00 obo 7. XCS 2inch docking ring – New $85.00 Price $25.00 each 8. Docking Station 2 inch, will work with smaller size rigs too - $250.00 9. XCS Transmitter Bracket - New-$150.00- Price $75.00 obo Please email me off the forum. Painter4270@me.com Thanks, Justin

I'm open to selling the Mkv 2 inch 4 stage post and J box and cables seperate from the Jerry Hill battery bracket. Post/jbox/cables = $3300 obo Hill Battery Bracket = $2000 obo Painter4270@me.com

Ergo- sold DBII- sold PDL - sold Blue camera plate- Sold Arri black plate w/ rods- sold Movie cam/ Pana plate- Sold MKV-Monitor mount- Sold TB6- Sold

Ergo- sold DBII- sold PDL - sold Blue camera plate- Sold Arri black plate w/ rods- sold Movie cam/ Pana plate- Sold MKV-Monitor mount- Sold

Ergo- sold DBII- sold PDL - sold Blue camera plate- Sold

1. Ergo- SOLD 2. PDL- SOLD

Yes, 4 stage 2 inch

I purchased a new rig and selling my old Rig in pieces and some of the parts from my new rig. I guarantee all parts to be in perfect working order. You have one week to check out the part you purchased after you receive the item. If your not completely satisfied, send it back on your dime and I will refund your money minus shipping costs. I will take 3 forms of payment. 1. Paypal (Purchaser has to pay the Paypal fees of 2.9% of the total sent) 2. Money transfer to Bank of America 3. Check ( I will wait for the check to clear before sending out the gear. Shipping will also be paid by purchaser. Gear will be sent by UPS in the USA and up to you on how fast. Out of the USA will ship UPS or FEDEX. Gear is located in Chicago. Gear sold is covered by your insurance. Please email me off the forum at Painter4270@me.com Hi res pictures on located http://www.flickr.com/photos/justinpainter/ Thanks, Justin Painter 1.GPI Pro Donkey Box II. This DBII has just been check out from GPI and is in perfect working order. NEW Price= $2400 Selling for = $1700.00 OBO 2. XCS Ultimate Gimbal 2 inch. This Gimbal has had only one owner and is in perfect working order and in amazing physical condition. New = $6300 Selling for = $4800.00 OBO 3. XCS Ergo handle for XCS Gimbal. This is the first ergo handle made by XCS. This ergo has a small problem. The hole in which you insert you arm post should be a perfect circle and if one doesn’t use a presision machined arm post with the correct specs after time the hole becomes a bit Ob long and not a perfect circle. I spoke to the person in which I bought my new rig and he had no idea of the problem and it never affected his operating. Where the arm posts touches the inside of the ergo is still in good shape, its just the outside of the hole. I spoke with XCS and was informed that the ergo is still usable. Feel free to call XCS and ask. New = $1300 Selling = $650 OBO 4. 1. MKV 2inch 4 stage integrated super . 2. MKV-Junction box (Top of post type) with cable 3. Jerry Hill Bottom Bracket 12v/24v. 4 Arcos 500 E on board recorder with cable that powers/ video off the Hill Battery Bracket 4. Arri Alexa cable 24 v, 12V Arri cable, Moviecam cable, Panavision 12v, Panavision 24v. , Cinetape cable 12/24V. 5. Included is a hard case for the rig. This rig is solid and has never failed me. If your interested on reading more about the jerry Rig, I have a manual and spec that I can email. This is a Standard Def Rig As of now i want to sell these parts as one. New MKV Post= $3720.00 Selling = $2600.00 New J-box and cable = $1250.00 Selling= $700.00 New Jerry Hill Jerry Rig = $5500.00 Selling = $2000.00 New Cables over $1300.00 = Included New Arcos and cable over 450.00 = included New hard case = $600 = included Total for all parts listed $5500.00 OBO 5. MKV 1.5 Monitor arm with drop down bars. (The drop down bars lower the weight of the monitor on the rig to make the bottom of the rig heaver so you don’t have to add weight. If you need it for a smaller post, MKV sells inserts. In the second picture I attached the bars and the plate, the plate is a good place to put a recorder or anything for that matter New MKV Monitor Arm = $1200.00 Selling = $700.00 OBO New Drop down bars= $150 Included 6.( SOLD) XCS PDL Level. SN 43 This level is not a PDL Plus. I believe the only difference is that it will not generate a cross hair. Not a big deal since most digital cameras generate their own. New XCS PDL= $2795.00 Sellling $1000.00 OBO 7. XCS TB6 w Duo Frame Liner. SN 163 This is TB6 was bought new from the person I purchased my new rig, so one owner. It is in perfect working order and in great physical condition also. New TB6 with Duo Frame = $14000 Selling for $3700.00 OBO 8. Preston MDR 2 Mount for GPI Pro DB2 and the part that goes on the MDR. This is the T bracket with the shoe so you can easily take off the MDR. New $417.00 Selling $275 OBO 9. GPI Camera plates 9 inch Arri/Pana Camera plates with two 9 inch Rods New Plate = $216.00 Rods $132.00 for both rods Selling= $200 Obo 9 inch Arri/ Pana blue New Plate= $216 Selling $100 obo 9 inch Movie cam/ pana New Plate= $216 Selling = 75$ This plate will work with most cameras, Ive used it on Alexa and Epics 10. Jerry Hill 2.125 Docking Clamp for MKV post for under the J- box New= $85.00 Selling for $50.00 Jerry - Rig This is a highly refined approach to my needs of operating. The first objective was to build something reliable. Second was for it to withstand the hardships of location shooting. Third, fast and easy to setup. I picked Anton Bauer batteries because you can find them anywhere in the world, and there is a wide choice of batteries and chargers. The thinking behind the design of the “Jerry-Rig” was to have a sled that was convertible to the camera you are flying. Meaning that if you are flying a video camera and it is not very heavy then you should be able to use one battery for the power and weight savings. If you would like to run two you can. This is also true for the heavy film cameras. One for 12 volt and two for 24 volt. You can also mix and match the batteries. "Update your 3-A or EFP sled." The housing is milled from solid stock (2024-T351) and then hard anodized (Black). The pin out for the cables are the same as the PRO design so it’s totally interchangeable. Some of the unique and innovative features: · The ICBM is integrated into the sled. This keeps an eye on your battery level. · Built in video DA. · Worm drive for the battery adjustment (red knob). Batteries can be adjusted 8” inches fore and aft. There is also a coarse adjustment that disengages the worm drive. An adjustment scale is provided on the side of the sled. · The battery box has two circuit breakers to cut power. · Two switches to select battery configuration and power (12 volt or 24 volt ).

Low mode bracket for sale. This bracket sells at Tiffen new for $295.00 Im asking 175$ and 10$ shipping to anywhere in the USA. Not selling out of the USA. Please email me off the forum @ painter4270@me.com Thanks, Justin Link to Tiffens website= http://www.tiffen.com/displayproduct.html?tablename=steadicam&itemnum=078-7393-02

Looking for a 2nd hand TV logic 5.6 with wave form Please email me off the forum Thanks Justin Painter Painter4270@me.com

Cart has been taken.

I have a older mag liner jr. With a large top tray and sticks holder that could use a new home. I'm willing to gift it to a younger Steadicam Op or AC. The cart is located in Venice beach, it's located at a friends house. I'm in Chicago, so I'll need to set it up for a pick up. Sorry no pics. . First to email,it's yours. Just pay it forward sometime in the future. Please email me off the forum Painter4270@me.com Justin Painter

Vest has been sold

Pro Vest $ 4000.00 New- $5200 plus Tax if in California. I will give you one week to check out the vest after you pay. If your not happy with the vest I will return your money. You pay for shipping back to me. Vest is located in Chicago Email me off the forum Painter4270@me.com

Rondford has been sold

Vest bad has been sold! PRO Vest still looking for a new home.

Dropping the Vest to $4100. I just check on shipping with UPS, shipping to most places in the USA will be 35-40$ for 2-3 days

Matthieu, I don't understand your question Justin

Alexa plate has been sold

1.Rondford Baker mount with quick release plate (no screws). 2. Alexa plate. This plate was purchased from Mathias Biber a few years ago and only used it a few times. This plate attaches to the bottom of the Alexa where the hole is on the bottom. This plate fills in the hole so one can attach a cheese plate to the bottom of the camera. 1. Rondford Baker and Quick release plate= $375.00 2. Alexa mount plate= $50.00 You pay for shipping and if you want to pay with paypal you pay the 2.9% fee. email me off the forum painter4270@me.com

Selling my Pro vest. This vest is in great condition, its about 5 years old. I bought this vest new from Pro and has only been used by me. The vest has not been used for any long period of time and there has been times that I have not used it for months. Therefore its in great condition. Im 6 ft about 190 pounds, the vest has a lot of adjustment room for larger or smaller ops. The only thing that is a bit warn is the strap for the top buckle. I pretty sure this happens to most Pro vest, the strap is the same size as the buckle and tends to get a bit warn from using the buckle. The strap in my opinion isn't a issue, the strap is still very strong and wont rip. The bag is great for the Pro vest, fits perfect and I keep my arm in the bag as well. It fits nicely in the middle of the vest in the bag. I want to give the person who purchases the vest the first shot at buying the vest bag, if they don't the bag I will sell the bag by itself. 1. Pro Vest- $4300.00 usd 2. Vest bag- $150.00 usd Total $4450.00 You pay for shipping and if you want to pay with paypal, you pay the paypal fee 2.9%. Otherwise, money transfer or check will work. Vest and bag are located in Chicago Please email me off the forum. painter4270@me.com Thanks Justin

No longer needed. Thanks, Justin

Looking for a used 1st AC Front Box with mount. Let me know if you have one laying around, and your price. Please email me off the forum. Thanks, Justin Painter painter4270@me.com

Im taking the Rig off the market at this time, sorry.

Taking offers for parting out the rig Or $10,000 for everything listed above besides the Gimbal OBO 1. Pro Donkey Box and plate 2. MKV- 2 inch 4 stage post with J-box and cable 3. Jerry Hill battery stage with Archos and cable xcs Gimbal is not for sale email me off the forum painter4270@me.com