Justin Painter

OConnor 2575D $14773.00 $11500.00

1. 2575

2. 2 part pan handle

3. front box mount

4. Eye piece level bracket

5. 2575 case

6. Euro Plate

7. touch and go plate

This head was used for 1 Season on a TV show in Chicago and was just checked out by Oconnor and is in perfect working order. And a 9 out of 10 in condition. Purcahsed in 2013

Tango Head 2 New Asking OBO

$6850.00 $5500.00

1. Tango head 2

2. Pelican case

3. Touch and go plate

Perfect condition purchased in 2013 barely used

Teredek Bolt New with Extra cables= $2760.00

Asking $2000.00 OBO

TX 9 out of 10

RX 8 out of 10

Works perfect

1.Teradek Bolt Pro TX 72002986H 2. Terakdek Bolt Pro RX 72503562F 3. TX/RX AC Power 4. TX/RX 2PIN TO AB TAP POWER 5. TX/RX 2 PIN TO AB TAP POWER 6. TX/RX 2 PIN TO 2 PIN POWER 7. TX/RX 2 PIN TO 4 PIN XLR POWER 8. BNC COILED CABLE 9. TERADEK BOLT CASE 10. SCREW MOUNT 11. HOT SHOE MOUNT 12. DIRECTION MANUAL


Cinetape New = $6800 with out any cables

Link 1 wireless read out
New= 2750.00

I want to keep the Cinetape and link 1 together as a kit

Asking $6900.00 OBO

1. Horns

2. Main unit

3. 24v/12v power cable 3 pin RS

4. 24v/12v power cable 3 pin RS

5. 12v Anton Bauer P-tap

6. Horns Cable x2

7. Extension Tubes

8. Black case with cinetape cut out

Link 1 Wireless Unit

1. Read Out Receiver

2. 9v battery bracket for Receiver.

3. Transmitter

4. Transmitter cable

5. Antenna right angle x 2

6. Antenna straight x 2

7, small black pelican

All has been sold!

Most of the gear has been sold besides...

1. 50ft cable from Cinetape

2. MKV to Panavison power large Lemo (Gold/Millenium)

3. MKV to Panavision power small Lemo

Orlando,

Contact Walter, he sells the pin.

http://www.walterklassen.com

Justin

I found this universal monitor mount from Sachtler.

http://shop.artemis-hd.com/index.php?cl=details&anid=1e9f41b398c98e96d0228207164324a3&cnid=e218a463a837a335b0e0124427c26095

I normally fly my TB6 and mount it to my sled with the XCS monitor support arm. I have a Panasonic 910G as a back up to my TB6 for inside work. The Panasonic 910G doesn't have mounting points on the sides for a Yoke type mount, the monitor does have a 1/4-20 and 3/8-16 female on the bottom of the monitor. What are my options to mount this monitor, I still want to use my XCS support arm.

Thanks in advance for the help

Justin

Ultralight system is sold

Selling some gear! I would like to sell all parts in the USA. I excepts Checks/ Money tranfer to BOFA, and paypal although if want to use paypal you need to pay the 3% fee that they charge.

If you have any questions please email me at painter4270@me.com

1. Ultra light controls System for Sale.

Part New Price

1. ¼-20 Ball 22.95

2. 3/8-16 Ball 22.95

3. Clamp x3 29.95 = 89.85

4. Monitor Support Base ¼-20 x2 46.95 = 93.90

5. Monitor support base 3/8-16 49.95

6. 5 inch arm 47.95

7. 8 inch arm 47.95

total new- 375.50

Asking 250$ for all parts

2. Element Technica female V-lock.

New= 125$ asking $75.00

3. Arm with 3/8 that mounts to camera to ¼-20

asking $50.00

4. IDX Anton Bauer to V mount adaptor

New= $156 Asking $85.00

5. tv logic power cable D-tap to 4 pin mini xlr

New= $90.00 asking - $60.00

6. 50ft cable from Cinetape brain to Wireless read out or wired display

I made this custom cable for use in the Arm cars, I didn’t like loosing connection when the battery on the wireless would run down.

New= $150 Asking= $75.00

7. Lentequip 3 pin Fischer splitter

New= $416.00 Asking $150.00

8. Hill PAM5/8 Arm for Panavision x 2

New=$100 Asking $50.00 each

9. Hill 19mm to 5/8 Pana reducer

new= $35 asking $20.00

10. Preston MDR2 Run/stop cable for Pana film

new= $200 Asking- $100

11. Preston MDR2 Power to Pana 12v

12. Preston HU2 batts and Chargers.

A. 3 of the batts are in perfect working order lots of life left one of the batts was owned by Garrett Brown at one time. One of the batts needs the ears replaced but will work if taped on to the HU2

B. 1 Charger is in perfect working order, the other needs one of the contacts fixed, I believe its about $100.00 at Preston.

Asking $350

13. Hill Mag Dock 2. This is the 2inch dock

new= $525 Asking - $400

14. MKV to Panavison power large Lemo (Gold/Millenium)

New- $175.00 Asking - $50.00

15. MKV to Panavision power small Lemo ( XL or Platinum)

New $150.00 Asking - $50.00

1.Hill Battery bracket for 2 inch - SOLD

2. 3 pin Fischer male to 3 pin Fischer male 12/24 v (cinetape power)- SOLD

3. XCS 2 inch docking ring with post- SOLD

4. XCS Monitor Cables 24 Inches- SOLD

5. XCS 2 inch docking ring with post- SOLD

6. Anton Bauer Proformer- Recelled 3-2011. 16.5 Volt - SOLD

7. .Anton Bauer Proformer- Recelled 3-2011. 16.2 Volt- SOLD

8. Anton Bauer Proformer- Recelled 3-2011. 16.5 Volt, SOLD

9. Anton Bauer ProPac- Recelled 3-2011. 17.8 Volt- SOLD

10. MKV to 3 pin Fischer Male 12v/24v-SOLD

STILL ON EBAY. VERY LOW OPENING PRICES

1. Anton Bauer XM Nicad Charger with 4 bank interactive chip

2. Anton Bauer XM Nicad Charger with 4 bank interactive chip

3. Anton Bauer ProPac- Recelled 3-2011. 17.1 Volts 4.1 Discharge Amp Hours

4. Anton Bauer ProPac- Recelled 3-2011. 16.9 Volt, 4.0 Discharge Amp Hours

5. Anton Bauer ProPac- Recelled 1-2010. 16.6 Volt, 2.1 Discharge Amp Hours

6. MKV to Panavision (Large Lemo)

7. MKV to Panavision (Large Lemo)

8. MKV to Panavision (Small Lemo)

9. MKV to Panavision (Small Lemo)

10. XCS 2 inch docking ring

Im looking for a used Omni shot Preston HU2 Battery Adapter.

Please email me off the forum if you have one and your price.

painter4270@me.com

Thanks

Justin Painter

I just listed everything that Im selling on EBAY. Search Steadicam

All the Anton Bauer batteries have been recelled by John Ritter in Florida. When he recells the batteries the cells he uses gives the batts more Volts than when new. All the batteries have seen limited use and have been stored on a AB charger. I just did a 12 hour test on these batts and will give the read out condition for each battery individually. All the equipment that Im selling I will give the purchaser 1 week to inspect.

The Anton Bauer XM chargers can only be used if you have an AB Interactive charger that has the ports on the back of the AB interactive 2000 charger. The XM will only charge Nicad batteries THE XM WILL NOT CHARGE DIONICS OR HYTRONS. Each XM charger comes with the computer chip that you will need to install into your 4 bank charger. This chip allows you to charge nicads on your XM and all the rest of AB batts on the main unit. If you have a 2 bank charger you will need to buy a computer chip from AB. The chips I have are only for the 4 bank charger.

The XCS docking rings are 2 inch and 2 of them have a small post that can be cut off if needed. The post is used to keep the ring away from the top stage so its the correct distance away from the top stage for the XCS docking station.

1. Anton Bauer ProPac- Recelled 3-2011. 17.8 Volt, 4.6 Discharge Amp Hours $75

2. Anton Bauer ProPac- Recelled 3-2011. 17.1 Volts 4.1 Discharge Amp Hours $75

3. Anton Bauer ProPac- Recelled 3-2011. 16.9 Volt, 4.0 Discharge Amp Hours $75

4.Anton Bauer ProPac- Recelled 1-2010. 16.6 Volt, 2.1 Discharge Amp Hours $50

5. Anton Bauer Proformer- Recelled 3-2011. 16.5 Volt, 1.5 Discharge Amp Hours $45

6.Anton Bauer Proformer- Recelled 3-2011. 16.2 Volt, 1.3 Discharge Amp Hours $45

7.Anton Bauer Proformer- Recelled 3-2011. 16.5 Volt, .08 Discharge Amp Hours $35

8. XCS 2 inch docking ring with post $20

9. XCS 2 inch docking ring with post $20

10. XCS 2 inch docking ring $20

11. MKV to Panavision (Small Lemo) $45

12. MKV to Panavision (Small Lemo) $45

13. MKV to Panavision (Large Lemo) $50

14. MKV to Panavision (Large Lemo) $50

15. MKV to 3 pin Fischer Male 12v/24v $45

16. XCS Monitor Cables 24 Inches $75

17. 3 pin Fischer male to 3 pin Fischer male 12/24 v (cinetape power) $65

18. Anton Bauer XM Nicad Charger with 4 bank interactive chip $175

19. Anton Bauer XM Nicad Charger with 4 bank interactive chip $175

20. Hill Battery bracket for 2 inch or 1.5 inch post. Comes with Archos and power cable to rig. Standard Def. $1200 OBO

I have consolidated my other two for sale post into this post.

I except paypal, money orders, bank transfers or checks. if you use paypal you need to pay the 2.9% on the total after shipping. If I get charged for bank transfer you are responsible for that charge . I have BOFA and its very simple to do direct transfers, its free also.

I will Charge 9$ for the batteries, if you buy more than 1 it will still be 9$. USPS has a box that all you can fit in one box for around 9$

The cables will be $6

The XM's will be 15$

I will only sell batteries to buyers in the USA

if you are from out of the USA I will have to check on shipping prices

PLEASE EMAIL ME OFF THE FORUM AT

painter4270@me.com

Thanks,

Justin Painter

Ergo- sold

DBII- sold

PDL - sold

Blue camera plate- Sold

Arri black plate w/ rods- sold

Movie cam/ Pana plate- Sold

MKV-Monitor mount- Sold

TB6- Sold

MKV- 4 stage post- sold

Hill 2.125 ring- SOLD

Xcs gimbal - SOLD

MKV J- Box and Cable- SOLD

Case- SOLD

Preston T mount and MDR bracket - SOLD

1. Xcs to Alexa. SOLD

2. Mkv to AB female - SOLD

3. xcs 2 inch Ring- SOLD ( 1 left)

4. Pro to Bartech- SOLD

5. Docking station-SOLD

6. XCS/MKV/PRO to Hiroshi 5 pin Video tap- SOLD

Ergo- sold
DBII- sold
PDL - sold
Blue camera plate- Sold
Arri black plate w/ rods- sold
Movie cam/ Pana plate- Sold
MKV-Monitor mount- Sold
TB6- Sold
MKV- 4 stage post- sold
Hill 2.125 ring- SOLD
Xcs gimbal - SOLD

MKV J- Box and Cable- SOLD

Ergo- sold

DBII- sold

PDL - sold

Blue camera plate- Sold

Arri black plate w/ rods- sold

Movie cam/ Pana plate- Sold

MKV-Monitor mount- Sold

TB6- Sold

MKV- 4 stage post- sold

Hill 2.125 ring- SOLD

Xcs gimbal - SOLD

1. Xcs to Alexa. SOLD
2. Mkv to AB female - SOLD

3. xcs 2 inch Ring- SOLD ( 1 left)

4. Pro to Bartech- SOLD

5. Docking station-SOLD

Taking offered, No reasonable offer refused

email me off the forum

Painter4270@me.com

painter4270@me.com

Taking offers, no reasonable offers refused

Email me off the forum at

painter4270@me.com

I'll take it.

Please email me

Painter4270@Me.com

Thanks

Justin

Ergo- sold
DBII- sold
PDL - sold
Blue camera plate- Sold

Arri black plate w/ rods- sold

Movie cam/ Pana plate- Sold

MKV-Monitor mount- Sold

TB6- Sold

MKV- 4 stage post- sold

Hill 2.125 ring- SOLD

Equipment that is still for sale.

1. XCS 2 inch Gimbal. The buyer of my MKV post has a 1.5 XCS Sleeve and needs my 2 inch sleeve. If your interested in my XCS Gimbal and need a XCS 1.5 sleeve this can be done. Or the 2 inch sleeve $4700 OBO

2. Hill Battery bracket for 2 inch or 1.5 inch post. Comes with Archos and cable. $1700 OBO

3. Preston MDR 2 Mount- New price $225

4. Steadicam Hard Case $ 300 obo

5. MKV J- Box and Cable $500 obo

Please Email me off the forum at

painter4270@me.com

thanks,

Justin

1. Xcs to Alexa. SOLD
2. Mkv to AB female - SOLD

3. xcs 2 inch Ring- SOLD ( 1 left)

1. Xcs to Alexa. SOLD

2. Mkv to AB female - SOLD

Please email me off the forum for any inquires

Painter4270@me.com

1. XCS to 24v Alexa= SOLD