Justin Painter

Im looking for an XCS U1 or U2 full rig or individual components of the Ultimate rig.

 

Please email me off the forum.

 

Justin Painter

painter4270@me.com

Frankenrig for Sale: SD rig (NOT HD)

 

1. Pro Donkey Box 2 with T-mount for Preston and MDR mount to T mount.

2. MKV- V-2 top of post J-box 12/24V = 3 ports , video =2 ports (same pins as pro for video, AR port = 1 port, BNC in = 1 port.

3. MKV- 2 inch -4 stage post. Has integrated docking rings for MKV docking Bracket but I use the Hill docking bracket so there are 2 hill rings on the sled.

4. XCS Ultimate Gimbal 2 inch

5. MKV- V-2 Monitor mount with drop down bars

6. Jerry Hill Lower Battery Bracket (Jerry RIG) 12/24V

7. PRO Cheese plate Arri

8. Jerry Hill Docking Rings for use with your Hill Docking Bracket, 2 ,one on top and one on bottom

9. 24V. Arri- Alexa/435/SR2/Arricams

10. 12V- 4 pin Arri 3 or video cameras

11. 12V Arri 3 cable for high speed with Arri 3,

12. Preston MDR Power Rig to MDR

13. Moviecam 24v power

14. RED 1 power cable

15. Anton bauer female, good for powering anything that needs P-tap power

16. Panavision 12v

17. Panavision 24v

18. Cintape power 12/24, 3 pin Fischer RS male

19. Hard Travel custon case (Black/ Red) ( Not Pictured)

20. Arcos on board Recorder with cable that powers from the sled

 

1. Pro D-box 2- New $3500

2. MKV- J box- New $1300.00

3. XCS Gimbal – New $6300.00

4. MKV- V-2 Monitor mount- $1400.00

5. Hill Battery Bracket- $5500.00

6. MKV- 2inch 4 stage post and cable- $3500

7. Cheese plate- $180.00

8. Hard Case- $600.00

9. 24v arri - $220.00

10. 12v- Arri – $150.00

11. 12V- Arri 3 high speed- $150.00

12. 24 volt Moviecam- $150.00

13. Rig to Preston- $195.00

14. Red power cable- $220.00

15. Anton Bauer- rig to P tap female $165.00

16. Panavision 12V- 190.00

17. Panavision 24 V -$220.00

18. Rig to cinetape- $185.00

19. Gorlock rings- $170.00

20. Arcos on Board recorder and Cable- $350.00

 

 

Rig info:

1. In the shortest mode, the rig from top of Donkey Box to the bottom of the battery Box is only 33 inches long.

2. When the rig is fully extended its 78 inches long.

3. I never had any problems powering any cameras.

 

I put this rig together 6 years ago bought all the parts new, I believe I put together a great rig. Having the integrated super post will give you an advantage over the other OP that don’t own a super post, which means more jobs. Its much faster than having to change your rig over if you own a super post. In low mode you will be able to scrap the ground. When getting called from producers or Dp’s I always get asked, “ How low can you go in low mode”

 

 

 

Jerry - Rig

This is a highly refined approach to my needs of operating. The first objective was to build something reliable. Second was for it to withstand the hardships of location shooting. Third, fast and easy to setup.

I picked Anton Bauer batteries because you can find them anywhere in the world, and there is a wide choice of batteries and chargers.

The thinking behind the design of the “Jerry-Rig” was to have a sled that was convertible to the camera you are flying. Meaning that if you are flying a video camera and it is not very heavy then you should be able to use one battery for the power and weight savings. If you would like to run two you can. This is also true for the heavy film cameras. One for 12 volt and two for 24 volt. You can also mix and match the batteries.

"Update your 3-A or EFP sled."

The housing is milled from solid stock (2024-T351) and then hard anodized (Black). The pin out for the cables are the same as the PRO design so it’s totally interchangeable.

Some of the unique and innovative features:

· The ICBM is integrated into the sled. This keeps an eye on your battery level.

· Built in video DA.

· Worm drive for the battery adjustment (red knob). Batteries can be

adjusted 8” inches fore and aft. There is also a coarse adjustment that disengages the worm drive. An adjustment scale is provided on the side of the sled.

· The battery box has two circuit breakers to cut power.

· Two switches to select battery configuration and power

(12 volt or 24 volt ).

· The battery box can be setup for goofy foot operators.

· Walking lightTM. Located in the bottom of the sled, this powerful LED is handy

for dark stages and night shooting to see where you are stepping and to see your marks.

· Precision balancing level in an ideal position.

· Plenty of outputs for power and video.

· The "Jerry-Rig" sled is only 10 3/4" Long x 3" Wide x 8" Tall. (3.5 lb.)

The sled with post, gimbal, donkey box, Preston amp., TB-6 and one Pro Pack battery weights in at 18 lb. total.

 

 

 

Please email me or call me off the forum to discuss this sale

Thanks

Justin Painter

310-283-5760

painter4270@me.com

 

I guarantee all this gear to be in perfect working order. If you want more pictures or closer pictures of the gear, please email me.

 

At this time, I would like to sell the gear as a one, not ready to part out.

 

 

This gear is located in Chicago, you will have to pay for shipping

Steady-Rig Silver Spring Arm for sale- $7500.00 OBO. This arm is about 6 years old and I am the first owner. This arm has never been on a long TV show or feature. I mostly work on commericals. There have been times that this arm has sat in storage for 6-8 months. So basically it has not been over worked or abused. The arm has minimal amount of corrosion only 2 of the turnnions have a bit of corrosion, the others have none. See picture.

The first year I had the arm I was working on a short and was suppose to go through a door way and hit the door way and put a small dent and scratch in one of the arm covers. The arm itself was not damaged just a small dent, see picture. If the purchaser wanted to replace the arm cover they could buy one from Steadyrig. In my opinion it would be a waste of time and money and thats why I didnt replace it. I believe this arm is the best arm for the money and has been a great arm for me, no complaints

 

 

www.steadyrig.com

 

1. Steadyrig arm- 13-63 pounds. I think it will hold more though.

2. Arm bag

3. Speed crank.

 

 

 

$7500.00 plus shipping and if you pay with paypal you will have to pay the 3% that they will charge me. Other wise money transfer or check will work.

 

Please email me off the forum for info or pictures

 

The Arm is located in Chicago

I guarantee this arm, so if you buy it and your not happy with it with in a few days of you receiving it, send it back and I will return your money.

 

thanks

Justin Painter

painter4270@me.com

310-283-5760

 

 

 

Price dropped to $6500.00 OBO Make me a offer!

I will split the shipping with you if you buy it at $6500

 

New price $5900

 

 

 

SOLD!!!!!!

Steady-Rig Silver Spring Arm for sale- $7500.00 OBO. This arm is about 6 years old and I am the first owner. This arm has never been on a long TV show or feature. I mostly work on commericals. There have been times that this arm has sat in storage for 6-8 months. So basically it has not been over worked or abused. The arm has minimal amount of corrosion only 2 of the turnnions have a bit of corrosion, the others have none. See picture.

The first year I had the arm I was working on a short and was suppose to go through a door way and hit the door way and put a small dent and scratch in one of the arm covers. The arm itself was not damaged just a small dent, see picture. If the purchaser wanted to replace the arm cover they could buy one from Steadyrig. In my opinion it would be a waste of time and money and thats why I didnt replace it. I believe this arm is the best arm for the money and has been a great arm for me, no complaints

 

 

www.steadyrig.com

 

1. Steadyrig arm- 13-63 pounds. I think it will hold more though.

2. Arm bag

3. Speed crank.

 

 

 

$7500.00 plus shipping and if you pay with paypal you will have to pay the 3% that they will charge me. Other wise money transfer or check will work.

 

Please email me off the forum for info or pictures

 

The Arm is located in Chicago

I guarantee this arm, so if you buy it and your not happy with it with in a few days of you receiving it, send it back and I will return your money.

 

thanks

Justin Painter

painter4270@me.com

310-283-5760

 

 

 

Price dropped to $6500.00 OBO Make me a offer!

I will split the shipping with you if you buy it at $6500

 

New price $5900

Steady-Rig Silver Spring Arm for sale- $7500.00 OBO. This arm is about 6 years old and I am the first owner. This arm has never been on a long TV show or feature. I mostly work on commericals. There have been times that this arm has sat in storage for 6-8 months. So basically it has not been over worked or abused. The arm has minimal amount of corrosion only 2 of the turnnions have a bit of corrosion, the others have none. See picture.

The first year I had the arm I was working on a short and was suppose to go through a door way and hit the door way and put a small dent and scratch in one of the arm covers. The arm itself was not damaged just a small dent, see picture. If the purchaser wanted to replace the arm cover they could buy one from Steadyrig. In my opinion it would be a waste of time and money and thats why I didnt replace it. I believe this arm is the best arm for the money and has been a great arm for me, no complaints

 

 

www.steadyrig.com

 

1. Steadyrig arm- 13-63 pounds. I think it will hold more though.

2. Arm bag

3. Speed crank.

 

 

 

$7500.00 plus shipping and if you pay with paypal you will have to pay the 3% that they will charge me. Other wise money transfer or check will work.

 

Please email me off the forum for info or pictures

 

The Arm is located in Chicago

I guarantee this arm, so if you buy it and your not happy with it with in a few days of you receiving it, send it back and I will return your money.

 

thanks

Justin Painter

painter4270@me.com

310-283-5760

 

 

 

Price dropped to $6500.00 OBO Make me a offer!

I will split the shipping with you if you buy it at $6500

Sold

Steady-Rig Silver Spring Arm for sale- $7500.00 OBO. This arm is about 6 years old and I am the first owner. This arm has never been on a long TV show or feature. I mostly work on commericals. There have been times that this arm has sat in storage for 6-8 months. So basically it has not been over worked or abused. The arm has minimal amount of corrosion only 2 of the turnnions have a bit of corrosion, the others have none. See picture.

The first year I had the arm I was working on a short and was suppose to go through a door way and hit the door way and put a small dent and scratch in one of the arm covers. The arm itself was not damaged just a small dent, see picture. If the purchaser wanted to replace the arm cover they could buy one from Steadyrig. In my opinion it would be a waste of time and money and thats why I didnt replace it. I believe this arm is the best arm for the money and has been a great arm for me, no complaints

 

 

www.steadyrig.com

 

1. Steadyrig arm- 13-63 pounds. I think it will hold more though.

2. Arm bag

3. Speed crank.

 

 

 

$7500.00 plus shipping and if you pay with paypal you will have to pay the 3% that they will charge me. Other wise money transfer or check will work.

 

Please email me off the forum for info or pictures

 

The Arm is located in Chicago

I guarantee this arm, so if you buy it and your not happy with it with in a few days of you receiving it, send it back and I will return your money.

 

thanks

Justin Painter

painter4270@me.com

310-283-5760

Thanks, James. I'll give him a call

1. Weaver Steaman Head - $2700.00 OBO. This head brand new was over $10,000.00. I have own this head for 7 years and bought it from a DP who bought it new. This head has only been on my jobs it has never been at a rental house. This is probably the most pristine Weaver you will ever see. It comes with all the original parts and is in perfect working order. It also come with a case, one of the latches twists all the way around, I just throw some tape on the outside of the latch and its fine, other wise its a cheap easy fix.

 

2. Custom Tri hat - $375 OBO. I purchased this tri hat a few years ago, its in perfect working order, just has some cosmetic problems ( paint chipping and new welds) Cardellini sells one for $825. I think this one is better since their are less moving parts and it much faster to set the shot. Its a must have for car jobs.

 

3. Cardellini Head lock - $275.00 This is in perfect working order, its used on the bottom of a mitchell type heads. Much faster than the tie down.

 

I guarantee, all the items up for sale. The items are located in Chicago, you can pick up or you pay for shipping.

 

Paypal is fine but you have to pay the % that I will be charged to use paypal, I think its 3%

 

 

Please email me off the forum or call me

Justin Painter

310-283-5760

painter4270@me.com

 

 

 

 

 

 

Head lock- Sold

Weaver- Sold

Tri Hat- Sold

 

4x5 Tiffen Pola - on Ebay http://www.ebay.com/itm/Tiffen-4x5-Linear-Polarizer-Arri-Panavision-Arriflex-/221117054567?pt=Camera_Filters&hash=item337b9a7e67

Wondering if anyone knows if Hugo is on Vacation? I have emailed him a few times in the past 2 weeks @ admin@steadyrig.com, no return email. Does he have another email address?

 

Thank you,

Justin Painter

Tiffen 6x6 ND's 3,6,9,1.2 $800.00 OBO Filmtools is selling the same filters for today for $324 each.

 

1. ND3- good condition

2. ND6- has 2 small fine scratches in bottom left of filter, about a centimeter in length. I have used this filter and never had any problem.

3. ND9- good condition

4. ND1.2-good condition.

5. 6x6 filter pouch that holds 6 filters

6. 4 Tiffen single pouches

 

I would like to sell these 6x6 ND's as a package.

 

Schnieder 4x5 ND's- tiffen 4x5 clear- Schott 4x5 clear. $725 OBO

 

1. 4x5 ND3- good

2. 4x5 ND6- has a very fine small scratch on the bottom side, never had any problem

3. 4x5 ND9- good

4. 4x5 ND1.2

5. Tiffen 4x5 clear- good

6. Schott 4x5 clear- good

7. Schneider 5 hole filter pouch

6. Every filter comes with its own pouch.

 

I would like to sell these as a package

 

6x6 Schnieder True Pola Circular $275.00 OBO Filmtools is selling this same filter for $391.20

1. 6x6 True Pola- Good condition

 

4x5 Tiffen Pola linear $175.00 OBO Film tools sells the exact filter for $298.65

1. 4x5 Tiffen Linear Pola

 

6x6 Rota Pola with Schneider 6 inch round true Circular Pola $1000.00 ob0. I purchased the tray and bought the filter brand new about a year ago, it has seen little use. Lentequip sells theirs for $1650.00

 

4x5 Cinemead Rota Pola with 4.5 shnieder true circular pola $650.00 OBO. Lentequip sells theirs for $1084.00 and Abel Cinetech sells their for $912.00

 

 

If you buy any of these filters and arent happy with them I will return you money, no questions asked.

 

You pay for shipping or pick up in Chicago. Paypal is fine buy you have to pay the 3% they charge

 

Please email me off the forum or call me

 

Justin Painter

310-283-5760

painter4270@me.com

 

 

1. 4x5 ND's and clears are sold

 

6X6 NDS- SOLD

6X6 ROTA POLA- SOLD

6X6 POLA -SOLD

4X5 ROTA POLA- SOLD

4X5 ND'S, 2-CLEARS- SOLD

4X5 TIFFEN POLA IS STILL AVAILABLE DROPPED TO $150

Tiffen 6x6 ND's 3,6,9,1.2 $800.00 OBO Filmtools is selling the same filters for today for $324 each.

 

1. ND3- good condition

2. ND6- has 2 small fine scratches in bottom left of filter, about a centimeter in length. I have used this filter and never had any problem.

3. ND9- good condition

4. ND1.2-good condition.

5. 6x6 filter pouch that holds 6 filters

6. 4 Tiffen single pouches

 

I would like to sell these 6x6 ND's as a package.

 

Schnieder 4x5 ND's- tiffen 4x5 clear- Schott 4x5 clear. $725 OBO

 

1. 4x5 ND3- good

2. 4x5 ND6- has a very fine small scratch on the bottom side, never had any problem

3. 4x5 ND9- good

4. 4x5 ND1.2

5. Tiffen 4x5 clear- good

6. Schott 4x5 clear- good

7. Schneider 5 hole filter pouch

6. Every filter comes with its own pouch.

 

I would like to sell these as a package

 

6x6 Schnieder True Pola Circular $275.00 OBO Filmtools is selling this same filter for $391.20

1. 6x6 True Pola- Good condition

 

4x5 Tiffen Pola linear $175.00 OBO Film tools sells the exact filter for $298.65

1. 4x5 Tiffen Linear Pola

 

6x6 Rota Pola with Schneider 6 inch round true Circular Pola $1000.00 ob0. I purchased the tray and bought the filter brand new about a year ago, it has seen little use. Lentequip sells theirs for $1650.00

 

4x5 Cinemead Rota Pola with 4.5 shnieder true circular pola $650.00 OBO. Lentequip sells theirs for $1084.00 and Abel Cinetech sells their for $912.00

 

 

If you buy any of these filters and arent happy with them I will return you money, no questions asked.

 

You pay for shipping or pick up in Chicago. Paypal is fine buy you have to pay the 3% they charge

 

Please email me off the forum or call me

 

Justin Painter

310-283-5760

painter4270@me.com

 

 

1. 4x5 ND's and clears are sold

Tiffen 6x6 ND's 3,6,9,1.2 $800.00 OBO Filmtools is selling the same filters for today for $324 each.

 

1. ND3- good condition

2. ND6- has 2 small fine scratches in bottom left of filter, about a centimeter in length. I have used this filter and never had any problem.

3. ND9- good condition

4. ND1.2-good condition.

5. 6x6 filter pouch that holds 6 filters

6. 4 Tiffen single pouches

 

I would like to sell these 6x6 ND's as a package.

 

Schnieder 4x5 ND's- tiffen 4x5 clear- Schott 4x5 clear. $725 OBO SOLD!!!

 

1. 4x5 ND3- good

2. 4x5 ND6- has a very fine small scratch on the bottom side, never had any problem

3. 4x5 ND9- good

4. 4x5 ND1.2

5. Tiffen 4x5 clear- good

6. Schott 4x5 clear- good

7. Schneider 5 hole filter pouch

6. Every filter comes with its own pouch.

 

I would like to sell these as a package

 

6x6 Schnieder True Pola Circular $275.00 OBO Filmtools is selling this same filter for $391.20

1. 6x6 True Pola- Good condition

 

4x5 Tiffen Pola linear $175.00 OBO Film tools sells the exact filter for $298.65

1. 4x5 Tiffen Linear Pola

 

6x6 Rota Pola with Schneider 6 inch round true Circular Pola $1000.00 ob0. I purchased the tray and bought the filter brand new about a year ago, it has seen little use. Lentequip sells theirs for $1650.00

 

4x5 Cinemead Rota Pola with 4.5 shnieder true circular pola $650.00 OBO. Lentequip sells theirs for $1084.00 and Abel Cinetech sells their for $912.00 SOLD!

 

 

If you buy any of these filters and arent happy with them I will return you money, no questions asked.

 

You pay for shipping or pick up in Chicago. Paypal is fine buy you have to pay the 3% they charge

 

Please email me off the forum or call me

 

Justin Painter

310-283-5760

painter4270@me.com

Arri FF3 $3700.00 OBO

 

This FF3 is in great condition, just some normal wear and tear. I am the 2nd owner, I purchased it from a 1st AC who bought it new. It has never been at a rental house and abused. This FF3 is the type in which you can switch from 15mm set up to 19mm set up. The FF3 has the ability to change the speed of the pull, has two speeds, great for hard focus pulls. I believe the FF3 is the only follow focus that has this option. You get everything in the picture.

 

1. FF3

2. Off side wheel

3. Off side extension

4. 6 inch whip

5. speed crank

6. 4 marking discs

7. 19mm rods set up (clip on type)

8. 15mm rods set up (slide on type)

9. Zoom gear

10. Prime gear ( metal)

11. Prime gear (plastic)

 

Please email me off the forum or call me

 

You pay for shipping or pick up in Chicago. Paypal is fine buy you need to pay the 3% that I will get charged.

 

Justin Painter

310-283-5760

painter4270@me.com

1. Weaver Steaman Head - $2700.00 OBO. This head brand new was over $10,000.00. I have own this head for 7 years and bought it from a DP who bought it new. This head has only been on my jobs it has never been at a rental house. This is probably the most pristine Weaver you will ever see. It comes with all the original parts and is in perfect working order. It also come with a case, one of the latches twists all the way around, I just throw some tape on the outside of the latch and its fine, other wise its a cheap easy fix.

 

2. Custom Tri hat - $375 OBO. I purchased this tri hat a few years ago, its in perfect working order, just has some cosmetic problems ( paint chipping and new welds) Cardellini sells one for $825. I think this one is better since their are less moving parts and it much faster to set the shot. Its a must have for car jobs.

 

3. Cardellini Head lock - $275.00 This is in perfect working order, its used on the bottom of a mitchell type heads. Much faster than the tie down.

 

I guarantee, all the items up for sale. The items are located in Chicago, you can pick up or you pay for shipping.

 

Paypal is fine but you have to pay the % that I will be charged to use paypal, I think its 3%

 

 

Please email me off the forum or call me

Justin Painter

310-283-5760

painter4270@me.com

 

Do you have contact info for John?

 

John does great work, I highly recommend him.

 

 

John Ritter

iebold35@hotmail.com

1 (954) 557-9765

Hi there,

Im looking for 2 or 3 dead or close to dead Anton Bauer Dionic 90 batts.

 

Please email me off the forum if you have any for sale

 

Thanks

Justin Painter

painter4270@me.com

 

 

I not in need of any more Dionics

 

Thanks DOC!

Hi there,

Im looking for 2 or 3 dead or close to dead Anton Bauer Dionic 90 batts.

 

Please email me off the forum if you have any for sale

 

Thanks

Justin Painter

painter4270@me.com

I'll take it

 

 

SOLD

Im selling my back up MKV 24 V. to Arri Alexa,435,235,Arricam and so on.

 

I just purchased a right angle and don't need 3 cables. This cable has never been used so its in perfect condition.

 

 

East Coast Cables sells this cable for 165$ Im selling this for $75.00. I believe the Fischer connector alone cost close to 75$

 

 

Please email me off the forum at painter4270@me.com

 

You pay for shipping

 

 

 

Im willing to sell these Batteries to multiple people and open to offers.

 

Please email me at painter4270@me.com

Im selling 4 Anton Bauer Proformer batteries that were recalled 1.5 years ago and have very little use. The batts have always been on the interactive Anton Bauer charger. They were recelled by John Ritter in Florida, he does an amazing job, I believe he uses cells that have more power than when they were bought new. I have not used them since I usually fly a heavy camera and need to use heavy batts. The batteries cases are in perfect condition. Anton Bauer doesn't sell these batts anymore. These would be great for a smaller sleds or full size sled. They weigh 1 Pound 10 oz.

I just did a 24 hour test on the batts.

 

The result of the tests

1. 16.1 Volts and 1.3 Amp Hours

2. 15.9 Volts and .9 Amp Hours

3. 15.6 Volts and 1.1 Amp Hours

4. 14.7 Volts and .8 Amp Hours

 

I would like to sell all 4 to one person.

 

$80 Each = $320 and you pay Shipping.

 

I will only sell to USA and Canada

 

Please email off the forum at painter4270@me.com

Looking to buy

1. Ward Sniper Mark II

2. 6 Inch Mounted Round Pola, Tiffen or Schnieder

 

 

Please email me off the forum

Painter4270@me.com

 

Thanks,

Justin

Looking for a used 6 inch round Mounted Pola. Im interested in a Circular Pola but might be interested in a Linear Pola. If you have one email me off the forum.

 

Tiffen or Schneider only

 

 

Thanks

Justin Painter

painter4270@me.com

Looking for a used Arri BA-2 19mm Rod Adapter for Arri Follow Focus ff3 or ff4.

 

Im looking for this part ASAP

 

 

Please email me off the forum

 

thanks

Justin Painter

painter4270@me.com