SergeiFranklin

https://cleanscamerasupport.com/product/preston-monitor-bracket/

with https://mediablackout.net/collections/3d-printed-products/products/logicblock?variant=27919557126

http://www.steadicamforum.com/index.php?showtopic=168

There is a group buy with 20% discount for the SmallHD 702 monitor.

http://www.reduser.net/forum/showthread.php?137492-Group-Buy-SmallHD-702-Series-Monitor&highlight=smallhd

Should be a good directors or AC monitor (with https://cleanscamerasupport.com/product/preston-monitor-bracket/.)

Larger volume is a problem if you fly with your gear. Since you have to put batteries in carry on 1.5x the volume is an issue.

I will have my Dionic HC's recelled until Anton Bauer makes a a new battery of that volume and capacity.

I spoke with Patti from Camera Essentials last week.

If 20 of us commit to purchasing a rain cover for the Cinetronic Gen 2 monitor she can make them.

It would have to accommodate the largest setup which I guess is the the http://cam-jam.de/qma.htmlwith a Dionic HC attached.

They would look like http://www.transvideo.eu/store/Raincovers

Leave a note if you are committed to purchasing one and email her info@cameraessentials.com

I didn’t discuss price but based the Transvideo ones I guess they will be under $100

I am looking for a PRO Cinetronic Gen 2 monitor mount.

Please contact me at ev@earthvideo.net

Do you still have the mount?

Sold

http://www.shapeways.com/search?q=bartech+focus

For Sale Bartech System

1 BarTech Handset with Iris Slider (focus and iris)

1 fStop receiver

5 focus rings

PRO power cables.

steadicam mounting bracket

$2500

handset is 1 1/2 year old

receiver is 2 1/2 years old

Please contact me at sergei@earthvideo.net or 212-228-4254

For Sale Bartech System

1 BarTech Handset with Iris Slider

1 fStop receiver

3 focus rings

$2700

or

1 BarTech Handset with Iris Slider

2 fStop receivers

10 focus rings

PRO and Ptap power cables.

steadicam mounting bracket

Also will include for free my old BFD focus and iris handset

$3900

Please contact me at sergei@earthvideo.net or 212-228-4254

Sergei Franklin

 

I spoke to Paul Dudeck about HCs being replaced and that is a year or so off.

 

I guess I will re-cell my HC's once they stop selling them. Has someone used http://www.ritterbattery.com How is their service and quality?

For Sale BarTech Focus Device Iris model Hand unit transmitter

Works with analog or digital receiver.

Antenna was replaced with a BNC version.

Unit is working fine, Antenna is bent, rubber side covers are missing, channel selector knob is missing (you can still change channels)

Included is a bracket to attach to focus unit

$450

Please contact me at sergei@earthvideo.net or 212-228-4254

Sergei Franklin

http://www.shapeways.com/model/218566/focusring.html?li=search-results&materialId=6

GPI unfortunately doesn't make them anymore. But they still make the HD cable in case you find a SD one. You just need a retaining ring plier to swap out the cable.

This is how I mount the XCS level. The way the holes are this will not work with your level.

Since there are no buttons maybe it can attach on the inside behind the front battery.

Does the angle or orientation mater?

I have a lot of old Hytron 50 batteries and a few Trimpacks. I am in New York. If anyone wants them to recell please contact me to pick them up. NO charge.

At http://www.ritterbattery.com they are $115 to recell (I haven't used them).

Sergei

ev@earthvideo.net

Anton Bauer Quad 2702 charger with discharger module installed.

It has been upgraded to the latest firmware version 5.8.

$400

For more info email me at ev@earthvideo.net or call 212-228-4254

For Sale: Pro generation II center post, upper and lower junction boxes and Chasecam recorder.

lower junction box has a video distribution amp added to provide cleaner signal to monitor, recorder and wireless.

$3500.

For more info email me at ev@earthvideo.net or call 212-228-4254

If you have a early Bartech Handset with a serial number between 1 and 292 and would like a knob compatible with the Aluminum focus disc's from Louis Puli here is your chance.

The first 292 knobs had a slightly smaller diameter.

I am ordering a hew hand set and have custom made rings for my old knob. I spoke to Jim Bartell and he will put a new knob and your unit so I can have your old one for my new order.

If you are interested please contact me

Sergei Franklin

sergei@earthvideo.net

646-247-7871

The Anton Bauer hat swap plate has thermal fuses. I opened mine and bypassed the fuses. That solved the shutdown problem. I used the hot swap bracket with the Red One. With the 10 sec startup on the Epic there is no need for a hot swap plate.

I never had any issues with the Epic and enjoy the light weight.

I would like the BNC to be on the case, not from a cable. There is no reason for a cable and eventually the cable will go and we will have to repair it.

Plus the Lemo to BNC from Red is long enough.

For Sale Teradek Cube 120 HDSDI WIFI transmitter with AC power supply and mounting screw

$1000

please contact me at ev@earthvideo.net

For Sale Precision Camera Eyepiece tap with Sony XC-77 camera, PRO cable.

Designed for older Arri cameras such as Arri 3, 35BL, SR 1, SR 2, Arri 2C,..

Jerry Hill Lowmode bracket for Arri 3 and all SRs,

Lowmode bracket for 35BL

$700 for tap and both brackets

VIdeo lowmode bracket $100.

please contact me at ev@earthvideo.net

Price Reduced

$1300