Milan Holec

Sorry guys my faul not 4000 us but AUD Appology

Hello to all. I do have Chrosziel 5" green monitor in very good working order. Have cosmetic scratch, monitor and frame line generator is in perfect working conditions. I'm very happy with this monitor, but I have now transvideo 8,4” HD monitor that’s way I selling this one. If anybody interested let me know I will asking $4000us, but you can make me offer is well. Thank you for looking Kind Regards Milan Holec mholec@bigpond.net.au

Hi just question how much for shiping to australia brisbane thank you Milan holec

hello Erwin how much you will by asking for post to australia Brisbane thank you milan holec

hi erick can you tell me model and what is distance for transmiting /good picture/ and if i undertand it is only standart definition isit thank you milan hoolec

Hi My Name is Milan Holec; I am a Steadicam operator. As a wireless focus for my steadicam I use BarTech Focus; Rotary Style Control Module and Linear Style Control Module with Remote Camera Run Outputs. This Device can control Run/Stop on different cameras: Panavision, ARRI 435/535/SR3, Moviecam Compact, ARRI BL/SR/35-III, Aaton 16/35, Video Camera 12-pin, Panavision Genesis and new RED One; which most of you already know. First time when I had RED ONE on my rig I?ve used my BFD to control wireless recording and I was facing the difficulties to Run/Stop camera (some people might have the same experience as myself ? the difficulty to control new RED ONE with BFD). What actually happened was; when we pushed the run button, the camera started recording, however when we pushed the button again to stop the camera there was message on display showing 1 frame bursting and the camera would not stop recording. If anybody experienced the same problem and would not know how to fix it I might be able to help you with that. RED ONE has two GPIO input (A/B). The following steps are for the setup of these inputs: 1. System ? setup menu 2. Setup menu ? Preferences 3. Preferences ? GPIO menu 4. GPIO menu ? GPIO Input A 5. GPIO Input A ? and select Record please do not select BURST or RAMP; it has to be on RECORD only; you can set the Input A or B - it doesn?t really matter.

Hugo, As I say before on phone I so glad that Elizabeth get over and you can go back to live without stressing and worry what happen to your love one. I sorry about my English I hope you know what I mean. I wish you that from now you and you family will by only better and better same as your return to business and one thing love to tell you I?m so proud and happy using you silver spring arm I using for last 2.5 years without any problem and still working like new. Thank you and all the best for you and Elizabeth Kindly Milan

Hi Ronald Can you please tell me which model is this one - NTSC /PAL OR GLOBAL EDITION Thank you Kindly Milan Holec

this motor is sold thank you Milan

This message is for all of you and come from down under (Brisbane). I wish to everybody Merry Christmas, have nice holiday and all the best in the New Year 2008 to you and your family's. Milan Holec :rolleyes:

This message is for all of you and come from down under (Brisbane). I wish to everybody Merry Christmas, have nice holiday and all the best in the New Year 2008 to you and your family's. Milan Holec :rolleyes:

Hi Norbert Way you did not ask me I do have manual for seitz 8720a do you want me to msake you copy? let me know cheers milan

hello to all I just put my CP- SLD 100 with gears on Ebay for sale if anybody intrested? thank you for your time Milan Holec

Hi did you sale the casefor sled is well?thx milan from aus

hi just want to ask do you still have the motor heden m26p?thx milan

Hi Andrew I'll go with option from Jerry You don't have to go to Us for 2day course I thing Phill Balsdon in Sydney do some time to time /If I wrong sorry to give you wrong info/ plus I can see you base in Melbourne ? You can contakt some steadicam op. from Melbourne they can help you fig.your problem /Herderson Image ,Hugo from Rig Engineering Australia , Luis Puli .../ good luck Milan

Hi to All From Milan Holec (Australia) :ph34r: Sorry I did not introduce my self yet and I?ll fix this just on start new year (my problem is English)but for now I wish to ALL Merry Christmas and safety Happy New Year. :rolleyes: :D

thank you Jamie Merry Christmas and happy new year to you

Hi can i ask you how much you asking for the carring bag (it is hard case?) thank you milan holec australia

Hi just want to ask you do you still have this ?can you send some pictures thank you milan holec australia

Hi all, Just asking if somebody out there have an extra backup motor /HEDEN M26P/that you not useing. if yes and you want to sale can you please let me know mholec@bigpond.net.au or 6170403122343 thx to all Milan

Since I am unable to get a direct message to Jan from ProGEAR in Denmark, I am trying to send this message to him via Steadicam Forum now. The message is this: Jan will you please take the monitor you have built for me to IBC commencing 07/09/2006 I am trying to find someone who is going to IBC to pick it up for me. Please contact me on either the Forum or on my home email address mholec@bigpond.net.au STATEMENT OF SITUATION/INVITATION TO ANYONE GOING TO IBC I have previously posted on the Forum about my dilemma with ProGear in Denmark. I know my English is hard to understand so have gotten help from someone in writing this latest message. The basic message is still: I JUST WANT MY MONITOR. In 2005 I paid 100% to ProGear for a monitor and I still have not seen it. Jan at Progear won't contact me and has delayed and delayed and delayed sending me my gear. The delaying tactics go on and on and on. I have asked for advice before and received many messages from other ops who have suffered the same treatment. My thanks to Janice Arthur for her support. I am offering a few hundred dollars to any op going to IBC who collects my monitor from Jan's booth and FedExes it to me. I have asked Jan to bring the monitor to IBC. It won't cost you a thing--I have a FedEx account for the shipping--and a couple of hundred dollars will pay for part of your expenses to go to IBC. I JUST WANT MY MONITOR.

Since I am unable to get a direct message to Jan from ProGEAR in Denmark, I am trying to send this message to him via Steadicam Forum now. The message is this: Jan will you please take the monitor you have built for me to IBC commencing 07/09/2006 I am trying to find someone who is going to IBC to pick it up for me. Please contact me on either the Forum or on my home email address mholec@bigpond.net.au STATEMENT OF SITUATION/INVITATION TO ANYONE GOING TO IBC I have previously posted on the Forum about my dilemma with ProGear in Denmark. I know my English is hard to understand so have gotten help from someone in writing this latest message. The basic message is still: I JUST WANT MY MONITOR. In 2005 I paid 100% to ProGear for a monitor and I still have not seen it. Jan at Progear won't contact me and has delayed and delayed and delayed sending me my gear. The delaying tactics go on and on and on. I have asked for advice before and received many messages from other ops who have suffered the same treatment. My thanks to Janice Arthur for her support. I am offering a few hundred dollars to any op going to IBC who collects my monitor from Jan's booth and FedExes it to me. I have asked Jan to bring the monitor to IBC. It won't cost you a thing--I have a FedEx account for the shipping--and a couple of hundred dollars will pay for part of your expenses to go to IBC. I JUST WANT MY MONITOR