mark morgan

Dear Mark, Check out Jeroen Hendriks at Lexmond Inc. - not only is the best cable maker I've ever used, but he was recently under contract to RED, so he will know what you need. He can be reached at (818) 384-4323 or jeroen@lexmond.com Good luck. right on and thank you so much simon i'll give him a call tomorrow best regards

just wondering who might be building the red one power cables thanks

aloha charles,robert and nick how are you robert well to answer your question no i don't have an ultra i'm flying the sachtler hd,sdi pro so i don't have a yoke to support the monitor and nick yes this is the monitor and charles "wow" heres what i can share and by the way great questions vertical veiwing: i didn't notice any veiwing loss within the full boom range i beleive the viewing angles are around 45 degrees left to right around 20 degrees from the top and 45 degrees from the bottom overcast skies: not a problem its not perfect but you can still do your job haven't had any white out sharpness: the picture is sharp and pure i personally think it looks better than the red monitor i have compared the nebtek side by side with other monitors in that price range and a little above and i still think that the nebtek panel has a better quality but still just my opinion side mounts: there are no side mounts but i would think in a pinch there are top and bottom mounts and the monitor has image flip 4 ways and i can only assume that you would put the connector side at the bottom to make it botom heavy,not sure if that is what you would want since i don't have a yoke system on my sled so i'm really not familiar with this set up green screen: replace the green screen probably not but like i said for the price to me it's a real winner and its built tough and your new reel that is some insane stuff it gives fantastic foresight on steadicam operating very very inspiring charles

the new hd,sdi,sd nebtek monitor worked beautifully today in full sunlight not a cloud in the sky 360 shot on the beach shooting with the red camera this perticular shot took place around 1 pm today never lost picture at any time during the shot and for the price of this monitor i'm totally happy and its built rock solid full metal housing loop thrus on all sources hd,sdi and sd might not be for everybody but for the price it's a real winner and the guys over at nebtek are all super kool aloha and fly safe

what else helps is if they are using follow spot operators see if they can't tighten up there there spots if they see or know that you are going to attemp a shot it will help with unwanted shadows especially on the 360's and like rob says you gotta wear your blacks even the socks most of all have fun

aloha brian did you have a look at the new nebtek hd sd sdi monitor under 2500 us and looks great even in the sunlight

hello andre i have the artemis hd pro sled with a 24v upgrade and have been very happy with it super solid done alot of running shots and no signs of unwanted vibrations and the battery placement options are second to none craftmanship is very sweet,vest is very comfortable i am running a g-50 and g-70 arm there hard to beat service from curt schaller and jim davis has been fantastic they really do there best to service you the way you would expect if your rig is in for a service they will happily send you a loaner happy shopping

aloha guys sorry to get alittle off track this stuff doesn't keep you warm but it's loaded with "titanium" great for blood circulation and pain and it's thin enough to wear under all the other stuffs the company is called "PHITEN" they make nice long and short sleeve shirts that look great, as on stage blacks they also make other products such as necklases,wrist bracelets,knee support,underwear etc.etc.,all for aches and pains and it works for me damn i sound like a sells rep i'm not, just sharing a fine discovery thanks to my girlfriend for more info check out www.phitenusa.com

alec it worked,i kinda sent an email stating not to use the footage until our business was taken care of first an email then a phone call monies being wired today went to bank today wire is in process yaaaah along with the phone call, they said they were super happy with footage same as stephen lesson learned thanks to all

hello alec what would you suggest to do about a company from another country such as australia came to hawaii shot but yet no payment all agreements via email,but unfortunetly no paper i hope not to have been kangarooed thanks mate

have a look at the jvc gy-hd 100,110,200,250 series lens options are very nice and it seems like the first full length feature (gabriel) was done with this camera the steadicam flyer will handle this camera no problem for alot of info on the dv style cameras go to the dvi forum loads of info best of luck

try nebtek they have a very nice new hd,sd,sdi monitor and it looks great even in the sun for the price

the pay check

aloha armando, don't know of the one that you are looking for but did you try the stanton jimmy jib web site they make a zoom and focus control for the steadicam rigs they are actually very nice and they will do both the canon and fujinon lenses also has a record button on the zoom/focus handle and it has a directional swith for the zoom "in and out" features www.jimmyjib.com

perfect "MR HOLWAY,DA MAN" and charles you "DA MAN "also very inspiring reel

thanks jerry your da man

thanks tom and jay i have the same pics that came with the manual but no details on how they swap it around or how to disassemble the arm if needed i can see away to do it but i just want to make sure how they at tiffen do it the right way best regards

received my new G-70 tiffen suggest swapping the bracket around between the socket block and the arm to use with my back mounted vest has anyone done this how did you do this i don't want to start taking things apart without knowing and is there a detailed maual to take the arm apart for cleaning and such any help would be much appreciated thanks to all

thanks to everybody downloaded perian and in no time we were up and playing best regards to all

aloha denny don't feel bad i have the same exact problem and did the same things as you did

Hi Mark, 3M Super 77 foaming adhesive will do the trick. It was recommended to me by the people at Anvil Cases years ago as a foam to foam and foam to case adhesive. It's usually available at Home Depot. The can I have which has lasted for years is a very large black aerosol can. It's some serious stuff so be sure you tape off and mask anything you don't want it on. Drop me a line or call sometime and let me know how the world / island is treating you. aloha robert buddy thanks so much for that sticky tip i'm going to home depot today to grab some i'll call you here soon

unfortunetly i have some foam that the glue is seperating any suggestions on a good glue for the foam in our cases to keep them together

by chance jeremy are you from new zealand

nice price what is the weight of the unit

found a av500 on ebay very nice price called archos for the docking pod but they say they don't make the docking pod for the av500 anymore so i got the travel kit which is for the av500 and the av700 it does the trick i've used it on my sled and on my jib arm it's actually a very kool tool and it looks good in direct sunlight as well best of luck