Kevin Jacobsen

Owned for about two years, I took it off the rig a few months ago and haven’t put it back on so it just sits around. Works like it should. $1000 comes with mount, 2 pin to 2pin power cable (pass through in smallhd). available for pick up in NYC or Miami depending on date. Free delivery in nyc and miami if weather/schedule permits at reasonable distance.

Sold

Still available

900

37" cart, adjustable height. The latch system to close the cart isn't the greatest, so whenever traveling I use ratchet straps to keep the cart together packed up. It's got a lot of use, but still works just fine. Most of the parts seem interchangeable with inovativ parts. The mast, and vest hanger are included and are newer purchases, less than a year old. The pin on the mast bent a little bit under heavy load. It's easily replaceable. I still use it for lighter builds, but wouldn't travel long distances with a heavy build sitting on it. Pick up available in Crown Heights, Brooklyn, NY $1000

as an owner of a pro aim cart and geared head, id steer clear of pro aim. With the geared head, there is a lot of play/deadspace before gears engage. on the cart, latches overtime, became bent and unusable, and the pin for the steadicam mast bent underload with a moderate heavy build on the sled. Proaim uses cheaper materials and are not reliable. Most of the issues could be fixed with some tinkering, but for peace of mind, I would save and buy something from a more reputable company.

Also was the gimbal clamp a custom job?

Please guide me as to where you found that bracket holding your jbox.

Kjacobsen.Ny@gmail.com hit me up there

Betz Wave Twister - sold Inovativ Channel Block and Mast Holder - $60 Jerry Hill Docking Fork 1.5" - $325 MKV V2 Electronics - $1500 the whole lot: 2 x D-Box, 2 x J box, one center post cable. These sets are both wired differently and need some work. Good for anyone savvy in wiring. I'm not sure which J goes to which D. MKV Evolution Electronics - $500 SD working set of electronics Assorted MKV cables - $25 each Cinetronic Monitor - $250 comes with monitor cable Working monitor except the some of the buttons on the keypad don't work, this can be replaced by yourself by buying a new panel. Some people on the forum know which one. Bartech Kit - SOLD missing on antennae on receiver, one power cable, one motor cable, wishbone, bunch of gears. seems to be in working order MKV center post shim for monitor mounts - $10 MKV angled V-Mount Battery Rack - $500 Make offers

Sold

Messaged and emailed you about the dock

i have one ring and a fork

i have a jerry hill. 1.5 fork and ring if you are interested, I dont have the rest of the dock tho.

bump

Twister sold

Betz Wave Twister - $1100 Inovativ Channel Block and Mast Holder - $60 Jerry Hill Docking Fork 1.5" - $325 MKV V2 Electronics - $1500 the whole lot: 2 x D-Box, 2 x J box, one center post cable. These sets are both wired differently and need some work. Good for anyone savvy in wiring. I'm not sure which J goes to which D. MKV Evolution Electronics - $500 SD working set of electronics Assorted MKV cables - $25 each Cinetronic Monitor - $250 comes with monitor cable Working monitor except the some of the buttons on the keypad don't work, this can be replaced by yourself by buying a new panel. Some people on the forum know which one. Bartech Kit - $350 missing on antennae on receiver, one power cable, one motor cable, wishbone, bunch of gears. seems to be in working order MKV center post shim for monitor mounts - $10 MKV angled V-Mount Battery Rack - $500 Make offers IMG_1082.HEIC IMG_1085.HEIC IMG_1086.HEIC IMG_1087.HEIC IMG_1088.HEIC IMG_1089.HEIC IMG_1090.HEIC IMG_1091.HEIC IMG_1092.HEIC IMG_1093.HEIC IMG_1094.HEIC IMG_1095.HEIC IMG_1096.HEIC IMG_1097.HEIC IMG_1098.HEIC IMG_1099.HEIC IMG_1100.HEIC IMG_1101.HEIC IMG_1102.HEIC IMG_1103.HEIC IMG_1104.HEIC IMG_1105.HEIC IMG_1106.HEIC IMG_1108.HEIC IMG_1109.HEIC IMG_1110.HEIC IMG_1111.HEIC

New price 5200

Jerry, Don't hate me... Can you make these in different colors? asking for a friend... Love, Kevin

Ear tec for smaller gigs, where you aren't displaced, really spread out etc. They are fast, and cheap so if one breaks its not the end of the world. The things that break are the mic attachements, they lose their tension and don't hold the position. Rubber bands/bongo ties can fix this by adding friction. But if they are treated well, they will last, I've had mine for about 2 years. The HME's way more versatile, good for bigger gigs, and where communication between multiple departments for specialty shots, stunts, heavy coordination is a must. The ac's still have to monitor batteries on the headsets for both, and when transporting I usually hand my headset off to one of them anyway. HME's are great for high end projects that have the money to rent the kit. but if you are just packaging your headsets into your base kit and have a quick fix for those times no one thought about communication, then ear tec is the way. Personal note: The sounds HME's make ie. beeps, etc. are more annoying than the eartecs, even though when the base station or master headset of the eartecs dies, the incessant beeping would drive anyone mad. Also a broken HME is still possible, and those are a bit more to fix/replace

I have a flowcine x spine on the forums listed

I finally got around to taking pictures. included are the original replacement parts and the new and improved replacement parts. This is the vest with some minor cosmetic scuffs but most of those parts are replaceable with the new parts sent from flowcine. 100% functional. these new parts are lighter, stronger, and sized correctly for the vest. improved parts are straps, shoulder buckles, screws, spine, waist hinges doors, waist buckles, and front mount assembly. the new price is $5400 plus shipping USA/Canada Only brand new from the site with the back relief pad is 5485 plus shipping and most likely VAT/import tax.

Front mount

I bought this vest practically new from an early adopter. I just really wanted to try something different from the pro vest. the previous owner had not used it on set because they intended to return to flowcine. flowcine was notified that I was the new owner and sent me a mountain of replacement parts, to replace the early version with its current build. I have not replaced any of the parts with the new ones, so they are all brand new. the vest also comes with all of the early version back ups. extra pads, extra buckles, extra straps, storage bag, etc. and it comes with the back support pad as well ($425) will provide photos for serious inquires or when I get around to posting them. $5800 for a practically brand new vest no wait times, no import costs, and if you come by you can try it on. located in NYC or Miami.