Jay Kim

I just bought a Teradek Bolt Pro package last week and I think it is worth every penny. I don't think they will release a newer system since Bolt Pro is fairly new. In a worst case, if they release a new system, at least you know you are not the only one suffering in NYC. So go for it.

Here is my little Director's monitor setup with Teredek Bolt Pro & Ikan DragonFly (similar to monitor handle but slightly wider and taller).

Sent you PM.

Another vote for BOLT Pro.

I am selling a few brand new power cables (GPI PRO Sled to Red Epic/Scarlet) for a friend who is not a forum member. Asking $220 for a cable. Please send me PM or email me at jsteadicam@me.com or you can directly contact him at Michaelirgang@gmail.com. He had built cables at Abel Cine and his work is top-notch.

I have a Shotsaver rickshaw from backstage for hire in NYC area. Call me or send me an email if you need to rent a most versatile(step-on/off or sit-on) Steadicam rickshaw for a day or longer. 917-415-4200 or jsteadicam@me.com

I got my Pro2/XCS hybrid sled upgraded to HD-SDI by David Hable at Cramped Attic and he did an excellent job!

I got two Epic power cables (for PRO II Sled) from Michael Irgang (NYC). He built custom cables for Able Cine before and his works are top-notch like Terry West. He also modified my Decimator2 power using Lemo 4-pin connector. Here is his contact info. Michaelirgang@gmail.com 917-659-1661

Sent you PM.

Park, I'd like to test your WFF system in NYC. Please let me know if possible.

-SOLD-

I sent my M-one motor to Don for a repair last December and he repaired it and sent back within two weeks. I know it is very hard to reach him by email so I tried to call him several times and once I talked to him he repaired my unit and sent back right away. He also mentioned that he has computer problems so that may cause some electronic communication issues. If you sent a motor for a repair, try to call him.

I kept this system as a back-up but haven't used for a long time. I recently tested the unit with two M-one motors and it works just fine. If you need a decent multi-channel focus system but can't afford a Preston or Two BFDs, this may be the system for you and all you need is a motor or two motors for Focus & Iris. Here is the list of items. 1 Seitz 8710A Transmitter/Controller 1 antenna for Transmitter 1 receiver 1 receiver antena 1 breakout box 1 two channel amplifier 1 bracket to hold receiver, breakout box and amp as single unit; standard rig mounting 3 receiver to amplifier cables (Lemo 0S.304) 1 Power cable for receiver/amp (PRO Sled) 1 Power cable for receiver/amp (Glidecam Gold Sled) 1 XLR(4 pin) to lemo power cable for receiver/amp 2 Motor cables (lemo FGG 1B 5pin) 3 batteries for transmitter 1 two-position battery charger ASKING $700 OBO Jay Kim 917-415-4200 jsteadicam@me.com

SALE PENDING

Price dropped to $2,200 with Arri Y-cable or $2,000 without Arri Y-cable.

Still Available.

Preston Microforce Zoom Controller with Motor Microforce V+F zoom control Preston Microforce Holster SPF ZMG-6 Motor with 0.8m-32P Gear ZMG-6 motor cable ZMG-6 Motor case Arri 12V Y cable Asking price is $2,400 with Arri Y-Cable and $2,200 without Arri Y-Cable. PM me or email me at jsteadicam@me.com

-SOLD-

Still for Sale! $300 USD OBO

Price reduced- $800 OBO

-SOLD-

I will take it.

I have an Arri CLM-1 motor (#1212) for sale. The motor works with current or older Arri WRS system. You can also use this motor with C-Motion LCS using RLM-1 cable. Here is some info for this motor from Arri Wireless Remote System guide. "Controlled Lens Motor 1 (CLM-1) K2.41378.0 Due to its high torque this lens motor is particularly suited for operation with stiff lenses or in cold weather. Compatibility: To operate the CLM-1 motor, the Universal Motor Controller, a Lens Data Box or Functional Expansion Module (FEM-2) is necessary. The CML-1 can be mounted to 19mm support systems. A bracket for 15mm support rods and an offset bracket for 19mm and 15mm are available. " Th motor comes with 19mm bracket, 19mm offset bracket, and 15mm insert. Asking price $1,000 OBO.

-SALE PENDING-