-
Posts
1,594 -
Joined
-
Last visited
-
Days Won
42
Everything posted by Jens Piotrowski SOC
-
Dionics charging on older PowerChargers
Jens Piotrowski SOC replied to Jonathan Pfundstein's topic in Batteries/Power
call Anton Bauer directly, they are very knowledgeable and will help and yes it depends on the firmware -
red epic run/stop for mdr 1
Jens Piotrowski SOC replied to richard bellon's topic in Steadicam Marketplace - Wanted
try Alan Rencher @ https://mediablackout.net/ -
call Anton Bauer Customer support, they can help you http://www.antonbauer.com/en-US/Customer-Services +1 (203) 929 1100 and please change your name to your full name
-
WTB - TRANSMITTER FOR 35MM camera
Jens Piotrowski SOC replied to danny bishop's topic in Steadicam Marketplace - Wanted
Canatrans -
http://www.xcsinc.com/# from their website Standard features of the Ultimate 2HD sled: Quick release, drop in style, no tools top stage. One SMPTE 3G, HD, SDI video input with 4 outputs. Two each on the top/bottom stages. One SMPTE Analogue video input with multiple outputs distributed to the top/bottom stages. One passive loop through. Regulated 12, 9, 7.2 or 4.5 Vdc output on the top stage can be used for still cameras. Lightest precision gimbal on the market. Filament wound 2" bayonet mounted telescoping center post. Our Battery Management System (BMS). LCD display shows battery voltage of all batteries and your user selectable 12/24 power mode. Single power on/off pushbutton with power "ON" LED indicator. Single 12/24 pushbutton power selector. User selectable "LO" battery indicator for 12 and 24 Vdc mode with a blinking "LO" battery LED. On/Off control of the LCD backlight. Correctly wired for the most demanding power situations, capable of over 550 watts @ 14 Vdc. Reverse polarity protected. Short circuit protected. Over current protected. Signal noise filtering for video and power. Left-right and fore-aft fine trim balance adjustments. Telescoping battery plates for increasing/decreasing panning inertia. Telescoping monitor arm for better viewability and increasing/decreasing panning inertia. The only system that will not vibrate into the camera causing the image to jitter. Your choice of Anton Bauer, PAG, or IDX V mount battery plates. The lightest big rig system on the market under 10 pounds. As always, customizable for your requirements.
-
F55 Sony / Steadicam use
Jens Piotrowski SOC replied to Remi Tournois / SOC's topic in Cameras (Film/Video/HD)
http://www.bhphotovideo.com/c/product/899160-REG/AJA_hi53d_HD_SDI_Multiplexer_To_HDMI.html this unit does image flip, might be good to have i your kit, take the output of the camera, flip it, then distribute to the transmitter and into your sled -
Ritter recelled hc batteries on new AB chargers?
Jens Piotrowski SOC replied to RonBaldwin's topic in Batteries/Power
after some more research I have found a battery, that at least according to the specs, might be the best suited Steadicam battery for now. It's the Switronix Hypercore Slim 3 Stud battery. 82Wh 10Amp draw, small and at 1.4lbs ! lightweight and compatible with Anton Bauer Charges http://www.switronix.com/products?page=shop.product_details&flypage=flypage.tpl&product_id=302&category_id=55 http://www.bhphotovideo.com/c/product/1212734-REG/switronix_hc7ag_hc_7ag_hypercore_slim_3_stud.html http://www.bhphotovideo.com/images/images1000x1000/switronix_hc7ag_hc_7ag_hypercore_slim_3_stud_1212734.jpg Capacity: 75wh, Nominal 82Wh (14.8V, 5.5 Ah) Size: 3.8 x 5.87" x 1.49" Weight: 1.4 lbs. Normal Runtime: (25W): 3.2Hrs $ 259 -
The box converts 12 to 24 volts, it's a booster. The Mdr operates at 24 v. The start/stop connector is bigger than on the Mdr2.
-
ask Alan Rencher
-
ceasefire, thx guys
-
F55 Sony / Steadicam use
Jens Piotrowski SOC replied to Remi Tournois / SOC's topic in Cameras (Film/Video/HD)
what Brooks said... -
SACHTLER ARTEMIS SLED & ARM WANTED
Jens Piotrowski SOC replied to steadimotion's topic in Steadicam Marketplace - Wanted
hi, this is a FULL name forum, please contact administrator to correct, thx- 1 reply
-
- 1
-
http://www.transvideo.eu/StargateFHD 3200 EUR available through the Transvideo channels
-
Wait for the new Stargate FHD, coming out very soon...
-
SmallHD Monitor off angle viewability
Jens Piotrowski SOC replied to Ramon Engle's topic in Monitors
Not to my knowledge. -
SmallHD Monitor off angle viewability
Jens Piotrowski SOC replied to Ramon Engle's topic in Monitors
Ramon, the new Transvideo Stargate FHD 7" will be very interesting. http://www.transvideo.eu/StargateFHD -
Ritter recelled hc batteries on new AB chargers?
Jens Piotrowski SOC replied to RonBaldwin's topic in Batteries/Power
http://idxtek.com/products/cue-d75/ I think Anton Bauer made an economic choice, not an engineering one, not to produce a dedicated STEADICAM battery. -
Ritter recelled hc batteries on new AB chargers?
Jens Piotrowski SOC replied to RonBaldwin's topic in Batteries/Power
Other major companies, like IDX still have smaller Batteries in their program, unfortunately just in V mount. -
Ritter recelled hc batteries on new AB chargers?
Jens Piotrowski SOC replied to RonBaldwin's topic in Batteries/Power
Yes, completely agree with you on that Anton Bauer missed the mark for the STEADICAM world with any of their new batteries. Unfortunately. -
Ritter recelled hc batteries on new AB chargers?
Jens Piotrowski SOC replied to RonBaldwin's topic in Batteries/Power
"Anton Bauer no longer makes a battery with a suitable form factor for a three battery sled that mounts them horizontally (PRO/XCS)" BTW, the XCS sled does not care about battery size, you can use all kinds in every position, including the new A/B Digital 90. -
http://www.bhphotovideo.com/c/product/261464-REG/OConnor_08388_08388_14_Randall_Handle.html
-
http://www.omegalite.com/
-
http://www.betz-tools.com/en/wave1.php
-
Preston a Speed Aperature Computer
Jens Piotrowski SOC replied to S. Adelson's topic in Steadicam Marketplace - For Sale
this is great as a IRIS control unit with Preston G3 MDR2!