James Dunham

Sold

$3500

Sold!

Hi again, This is a drop down for operators who put the camera on the left and the arm on the right. This is the perfect length for those of us who need just a bit more elbow space and maybe two inches of boom down. Threads are clean and greased, ready to go. There is some scratching where my allen key was hitting it, obviously that won't affect operation. Retail is $695, asking $550 plus shipping.

Hi friends, I've decided to use my Exo Vest full time and so I need to let go of this one. It is the coveted full velcro version with so much room for snarky patches as shown in the pics. The waist pad is brand spanking new and made for a 38" measured hips, not 38 pant size, although it might work for someone with a 38 waist. I wear 33 inch pants and the pad is pretty much perfect fit for me. It also has a brand new chest strap and closure hook which is an update to the old one which would slowly eat through the strap. Allen key holder not included. Available for pick up in Los Angeles, I will consider shipping at your cost.

Any idea what it would take to fit a SmallHD 703? Wondering if it’s just the adapters or if you’d need a wider bracket.

Are these after the X-tune update?

Now $350

Tex and I want to know what a power husband charger is.

Recently bought this thinking it would work for my setup but I was wrong. Works great for any 1.5” post as long as you don’t need a fancy sliding balance stud. Make me an offer, I just paid $380 USD Happy to ship at buyers expense. located in Los Angeles

Sold!

Used for less than a year. I’ve decided to go with an iBaird because I keep it on all of the time, not occasionally as I thought I would. Works well on a PRO vest. One of the adjustment screws has some marring from rubbing on the arm. $600 plus shipping from the site: The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″. The “Plus” version also offsets the female socket block outwards from the vest, giving more clearance to the buckle. This is needed on for example a GPI PRO vest. This creates more space between the operators gimbal controlling arm and his/her articulated stabilizer arm connection, resulting in better freedom for the operators arm as well as better space between the vest, arm and sled. The female socket end allows of a greater tilt adjustment angle (up to +/-16.5 degrees, depending on male socket block) than traditional ones, also since you can now adjust this from both female socket blocks end you have a lot more tilt adjustment. Since the xDROP is not a permanently fixed bracket, you can choose to leave it connected on the articulated stabilizer arm and insert it in/out on your vest together as one piece, or you can let it be connected on your vest and just connect your arm in and out as usual. It works both ways and this can be particularly useful to GPI PRO vest owners operating goofy, where the waist latch lock is in the way when using a drop down bracket and they cannot open or close it without modification. With the xDROP they can just add or remove the arm and xDROP together off their vest, eliminating the problem. The xDROP works with all universal steadicam type vests, such as Tiffen Exovest, GPI PRO vests and all universal socket block steadicam type arms. However, if you have a buckle at the same side as the socket block connection that sticks out, for example as it does on a GPI PRO vest, we recommend getting the “Plus” version of the xDROP.

I emailed you!

Might be higher for Steadicam ops. Haha

You can change your settings to take jpgs. 1. Start the Settings app. 2. Tap Camera. 3. On the Camera settings page, tap Formats. 4. Tap Most Compatible.

Seeing as how iPhones now shoot HEIC by default, how long will it be before the forum is updated to handle these files locally?

Sent you a DM

Bought one new. Thanks all.

Hi all, looking to buy a Betz Sliding plate like the LT3. Please let me know if you have one you can part with. Thanks, James

Messaged you

Sold!

Just found out that this vest works only for left side operators (regular).

Messaged about the post

Sold!

Still for sale!