Brad Olander

MK-V monitor mount with Transvideo adapter and adapter to center monitor with single 1/4" 20 threads. Fits Master Series and Pro sleds. $325. SOLD.

J7 zoom controller with 12 pin Fuji and 8 pin Canon adapters. $225.

Bartech thumb wheel controller. $50.

Hirose to Hirose 4-pin F to 10-pin male. Used for Master Series sled to Transvideo monitor. $40.

18" Master/Ultra arm post. $125.

Prefer US buyer for shipping reasons.

Thanks.

Brad Olander

760 944 4475

Sold.

Vest $3400.

Sled $4500.

Arm $6300.

Nebtek monitor $1800.

$15k USD takes it all.

brad@olandercamera.com

Vest, Sled, & Arm still available.

Sled w/o monitor, $4500 obo.

Monitor sold.

Vest $3400.

Sled $4800 with hard case.

Arm $6300.

Everything works great.

760 944 4475

brad@olandercamera.com

Full package still available.

Original owner. I have flown 5Ds and film cameras. It is great for ENG and live cameras -- I will include a Sony V-mount plate. I can include a weight plate too.

Best offer? Thanks.

Will break up the package soon.

Klassen Vest with "low-profile" arm. Fit 32-34" waist. Room for some additional adjustments. Extra parts. (Arm can be mounted on left or right. Vest was originally built for "goofy-foot" operator.

Master Series arm with soft case and two arm posts. Will deliver the arm "de-tuned" for lighter cameras, or spacers removed for full capacity.

Broadcast sled with AntonBauer battery mount, docking bracket, plate with rod mount, camera power cable (4-pin XLR), and hard case.

Available with or without Nebtek Solar SC monitor. Monitor includes the Nebtek digital level.

Located in North San Diego County, CA.

PM questions or to see more pics.

$16k without monitor. $17,700 with Nebtek Monitor. (USD)

Brad Olander

Still available.

Nebtek Solar 7 SC monitor.

HD-SDI and Composite inputs and outputs.

Power with 8-pin Lemo, AntonBauer type batteries, or 4-pin xlr.

$2150.

Brad Olander

760 944 4475

I do have the manual. Send me your e-mail address and I can send a PDF.

Brad Olander

This is from the Master Series Broadcast manual. It is the entire electronics section. Hope it helps.

MSBroadcast.PDF

Brad Olander

But a bad feeling remains... What if this happens again on set :unsure:

A hose clamp in your kit is good, cheap insurance for possible gimbal clamp problems. Ugly and inconvenient, but it has saved the day.

If it was detuned, Cinema Products inserted two spacers for lighter loads. (See the black plastic piece in the picture). Remove them, and the arm will have more lift.

It is not difficult, but talking to Robert Luna is a great idea. Don't let the cables twist.

Good luck.

Now that the Go pro HD cams have LCD's on them and live out, we need to take advantage of that and het the folks at GOPRO to make different lenses for them then make an HD rig for the Flyer and pilot rigs!

Have you seen this?

GoPro 3D pics at Engadget.com.

And from the GoPro website...

Here are a couple of photos of a Model 1 sled, with the Bob DeRose modifications, in low-mode. I had two thumb screws on top of the monitor that allowed you to disconnect the front post, flip it, and attach it to the bottom of the monitor.

My Cine IIIa SuperBright is on eBay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...=STRK:MESELX:IT

Thanks,

Brad

Here is a more accurate picture.

The moire in my initial picture is only in the photo. It is not seen in use.

The scratch on the screen is only on the removable anti-reflective coating.

Thanks for the questions.

Transvideo CineMonitor IIIA Superbright

I have owned this since it was new -- never a rental item.

Originally a CineMonitor III, the “guts” and firmware of this monitor have been upgraded with each new Transvideo upgrade. There are some cosmetic scratches and one scratch on the monitor’s protective coating.

$2750.

All reasonable offers considered.

Thanks.

Brad Olander

brad@olandercamera.com

My eight year old and her friends are well over four feet tall. A meter and a half in Italy I believe. Nearly as tall as Rob Vuona's car.

And, they look straight ahead, or down (she's telling me this now). Depends on your motivation, but kids aren't looking up all the time just because we're taller.

Good luck,

Brad

Jeff I'm in the same boat. Need a new case but custom seems to be the only option. Although this looks interesting:

http://cgi.ebay.com/SKB-TPX-1-Trap-X-1-Cas...1QQcmdZViewItem

 

Let me know what you end up using.

 

 

Ramon Engle

I bought the SKB trap case (less than $150 delivered from eBay). It's very large compared to the custom anvil cases. Too large, I think. It does have wheels though. Never used it. For sale, by the way, if you're in Southern California.

Now, I'm trying this "air case":

http://www.bhphotovideo.com/bnh/controller...egoryNavigation

It only weighs 15 pounds. It is 64.5 inches H+W+D (4.5 inches over some of the commercial airline restrictions).

It has a thin plastic shell with thick foam rubber. Nice protection for around town. I haven't decided whether or not to fly with the sled in it. Maybe one of our New York friends can run down to B&H for a second opinion.

Brad

He does have 688 hits -- with his phone number listed twice.

Is that worth giving up his rate for a day? It might be.

I highly recommend these (the Keen Targhee):

http://www.rei.com/online/store/ProductDis...vcat=REI_SEARCH

They are waterproof, but not too hot to wear in SoCal the rest of the year.

SOLD

I have an older Betacam SP camcorder for sale. It could be a great practice camera (and might make money on the side for someone). It?s a JVC KY27U with a Sony PVV-1a back. It has a Fujinon lens and runs on NP-1 batteries. I can include a charger and some older batteries. I live in North County San Diego. I?d prefer not to ship it.

I have a few pictures at:

https://www.smugmug.com/gallery/474578

$875 for the camera head, deck, lens, and camera mounting plate.

Brad Olander

brad@olandercamera.com

SOLD

Practically new Nebtek Panasonic 7" 16:9 native (switchable to 4:3) color monitor. Paid over $1100 with tax and shipping. $900 takes it. I'll pay shipping (in the continental US) and include boxes and manuals.

Specs are here: http://www.nebtek.com/proddetail.php?prod=101NEB70PRO

Pictures (scroll down): http://olandercamera.smugmug.com/gallery/474578

Brad Olander

Steadicam zoom and focus controller with motor and gears for Fujinon, Canon, and film lenses. Can be seen at www.jimmyjib.com.

Wired handset and extra cable for assistant also included.

$1250 with Pelican case.

Brad Olander

760 944 4475