Jump to content

Jeremy Benning

Premium Members
  • Posts

    20
  • Joined

  • Last visited

  • Days Won

    1

Jeremy Benning last won the day on May 20 2021

Jeremy Benning had the most liked content!

Reputation

1 Neutral

1 Follower

About Jeremy Benning

Profile Information

  • Rig
    former XCS Ultimate owner
  • Location
    toronto, ontario, canada

Contact Methods

  • Website
    http://www.jeremybenning.com

Recent Profile Visitors

2141 profile views
  1. I am selling my trusty Preston kit that I bought new back in my days of doing steadicam. The kit has not been doing much lately so I figure it's time to sell. Located in Toronto, Canada. Make me an offer. It comes with the following: 1x Pelican 1550 Case w/ Padded Dividers Preston FI+Z3 Hand Unit with rubber grip S/N 1891 9x FIZ Marking Rings (incl. pre-marked Ai, Bi, Ci, Ei) Preston Iris break out unit (no SN) Preston Focus/Iris Hand Unit w/ Marking RIng S/N 1779 Preston MDR2 S/N 2073 1x Preston DM1X Motor S/N 3294 1x Preston DM2 Motor S/N 4578 (missing top cap) 4x 19mm Hill Motor Bracket Arms w/bushings 1x Custom 19mm Motor Bracket Arms w/bushing 1x Custom WNS Arri dovetail to rod adapter 1x Canon 0.5 Motor Gear 1x Panavision Iris Gear 1x. .50 Motor Gear 1x .60 Motor Gear 3x Spare Motor Gears 1x Extra Wide motor gear 3x spare rods & various spare screws 1x Sony Battery Charger 1x min Sony travel charger 3x Small Sony Batts 2x Large Sony Batts Cables: 1x extra long command cable 1x DMF to FIZ 4545 (power) 2x Red Start/Stop Cable 1x 3pin Lemo to MDR Power Cable 2x Anton Bauer D-Tap to MDR Power Cable 1x Hirose to MDR Power Cable 1x Remote Iris Breakout Box Cable 4450 1x HDCam Start Stop Cable 1x Y-Split Start/Stop to 4-pin mini Lemo 1x Start Stop to Mini 4-Pin Lemo 3x Motor Cables 1x 24v Arri 3-pin to MDR Power Cable 1x MDR2-Red Epic Start Stop 1x Arri Start Stop (film cam) 1x MDR / Fischer power cable 1x Serial 4538 Cable
  2. Price drop! We are selling one of our sets of Klassen wheels. Minimal use, in very good condition. Open to offers. They will control the DJI R2 or Movi gimbals. Wheels come with the Futaba transmitter... the corresponding receiver for your gimbal is not included but can be purchased online easily. In the last few months it had the internal hardware upgrade done by Klassen to the latest components (a $1,000 upgrade) which make the wheels super responsive, on the level of the DJI Master Wheels. Our used price is in USD, as these wheels were $5K USD new. As a bonus, the wheels also come with a custom 6' cable we had made by Klassen that allows for the wheels to be powered from a 4-pin 12V XLR battery source. AC power adapter, custom fitted Nanuk case, Mitchell tie down (wheels can be mounted to standard Mitchell support systems).
  3. We are selling one of our sets of Klassen wheels. Minimal use, in very good condition. They will control the DJI R2 or Movi gimbals. Wheels come with the Futaba transmitter... the corresponding receiver for your gimbal is not included but can be purchased online easily. In the last few months it had the internal hardware upgrade done by Klassen to the latest components (a $1,000 upgrade) which make the wheels super responsive, on the level of the DJI Master Wheels. $3400 is our asking price in USD, these wheels were $5K USD new. As a bonus, the wheels also come with a custom 6' cable we had made by Klassen that allows for the wheels to be powered from a 4-pin 12V XLR battery source. AC power adapter, custom fitted Nanuk case, Mitchell tie down (wheels can be mounted to standard Mitchell support systems).
  4. I'm selling these for a friend of mine, a steadicam op who has moved out of the country and left these behind. I could sell separately or together. They were his personal units from the time they were new and have been well looked after and work well. What I have: 1x Sony GV-D800 NTSC (Digital 8) Clamshell with TGV-100 tuner module 1x Sony GV-D900 NTSC (MiniDV) Clamshell with TGV-100 tuner module 2x PortaBrace custom soft protection bags for the Clamshells 2x Sony AC-VQ850 Battery Chargers 4x Sony Batteries various cables, AC adapter 1x Pelican 1500 case with lid organizer Looking for $1200 for both, OBO - let me know if you are interested in them separately. Jeremy jbenning@me.com
  5. FYI the TB-6 has been sold. The Clamshells and TGV-100 are still avail.
  6. Selling my trusty XCS TB-6 green screen that I bought brand new at the same time as my XCS sled years ago. I've never had a problem with it, its never needed service either. I've got other back up monitors now, so this is just taking up space. Needs to find a new home. I'm looking for $1500 OBO. Also selling off my kit of Sony Digital 8 and Mini DV clamshells, which both include all the batteries, chargers, pelican cases, Portabrace bags and the TGV-100 tuners. Also have a spare, brand new, still in the box TGV-100 as well. Make me an offer. Jeremy Benning, csc Toronto, Canada IATSE 667 & 600
  7. Price lowered to sell.... I am selling this on behalf of my 1st AC. We used these units for the last couple of years, great addition to our kits. It changed the way we work - for the better. Now we are upgrading and no longer need the Cam Waves. They still work great! Here are the details as posted by my AC: For sale (1x matched transmitter and 1x receiver). I am also selling a second identical system on ebay currently- which can be used together with this system in multi mode if desired. As a professional camera assistant, I was the owner/operator if this system - it was not a rental house system. Both have been upgraded with the latest firmware at the factory in Torrance, California. The units are clean and have been well maintained. Normal wear and tear on the chassis but they function and operate seamlessly. I used two (2) receivers with either transmitter in multi mode so as to be wireless with a Preston follow focus & onboard monitor, while also allowing video village to have its own wireless signal. The latency with these units is negligible - as good as any HD transmitter out there currently. Here are the specs on these units from the manufacturer: Automatically detects between HD-SDI and SD-SDI signals Transmission range of 150 feet line of sight or up to 100 feet through walls (actual range may vary depending on location environment) No FCC license is required for operation 2-channel embedded audio ensures no signal interference with complete audio/video synchronization. Uses integrated V-Mount for camera and battery connection; fully compatible with ENDURA batteries. 4 channel selectable frequencies and Auto--ideal if operating multiple systems in close proximity. Stylish and rugged design, with no external antenna 12W power consumption and weighs less than 2 lbs. TX features loop-through; RX outputs dual simultaneous signals Conformance to major technical and environmental standards including FCC, CE and RoHS specifications System 1: http://www.ebay.ca/itm/Camwave-CW-5HD-Uncompressed-Wireless-HD-Video-Transmission-System-/281111154380?pt=LH_DefaultDomain_2&hash=item417387cecc&_uhb=1 System 2: http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=281111155003&ssPageName=ADME:L:LCA:CA:1123
  8. For sale on behalf of my AC are: Two (2) pairs of used CamWave CW-5HD's for sale. Both have been upgraded with the latest firmware at the Torrance CA factory and have been well maintained. Normal wear and tear on the chassis but they function and operate seamlessly. We used two (2) receivers with either transmitter in multi mode so as to be wireless with a Preston & onboard monitor, while also allowing video village to have its own wireless signal. The latency with these units is negligible - as good as any HD transmitter out there. I am asking $2200 per unit. Here is the ebay auction link to both systems: http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=281106941429&ssPageName=ADME:L:LCA:CA:1123#ht_752wt_1220 http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=281106942531&ssPageName=ADME:L:LCA:CA:1123#ht_752wt_1220 Feel free to contact me directly with questions: jbenning@me.com
  9. Hello Everyone, I'm doing some spring cleaning and am selling my set of clamshells, both of which come with TGV-100 tuner modules, Portabrace bags and Pelican cases. See eBay links and details below. Also for sale is a brand-new, in the box Sony TGV-100 Tuner module, it was my spare which I thankfully never needed. Sony GVD-800 Digital 8/8mm Watchman Orange Pelican 1450 case with foam inside TGV-100 Tuner module (with Japanese labelled buttons) 3x Sony Info Lithium NP-F960 (large size) batteries 1x Hoodman H450 Hood (I had this before the Portabrace bag - its basically bonus 1x Sony AC Adapter/Battery Charger AC adapter cable to power the unit off AC. Mini-jack AV cable, which allows for RCA connection of composite video and stereo audio in/outs to the unit. Custom Portabrace carry bag, with integral viewing hood. I had these custom made by Portabrace to accommodate the tuner module (they didn't originally) Sony GVD-800 manual http://www.ebay.ca/itm/280866368202?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1292 Sony GVD-900 MiniDV Watchman Black Pelican 1450 case with foam inside TGV-100 Tuner module (with English labelled buttons) 2x Sony Info Lithium NP-F960 (large size) batteries 1x Sony AC Adapter/Battery Charger AC adapter cable to power the unit off AC. Firewire cable Custom Portabrace carry bag, with integral viewing hood. I had these custom made by Portabrace to accommodate the tuner module (they didn't originally) http://www.ebay.ca/itm/280866373593?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1292 Tuner Module: http://www.ebay.ca/itm/280863558959?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1292
  10. Hey Gang, Looking to sell my case of three SL 400 steadicam mags. I'm asking $1200 USD. Currently they are on ebay: http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewIt...E:L:LCA:CA:1123 These mags will also work with the Arriflex 435, Arri 2C and Arri 235. On the Arri 435 and 235, the mags sit on a slight downward angle, but not enough to alter balance. They are made of a magnesium material, making them very very light, lighter than 435 Steadicam mags. A footage counter is built into the cover. Weight: 56 oz (1.5 kg) Brand new these mags were $4250 USD each!!! They will run up to 130fps in forward only. Please contact me at: benning@interlog.com Or bid on ebay for them. I want to sell so offers accepted. jerem
  11. These mags are up on ebay currently: http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewIt...E:IT&ih=018 The SL400 Mags will work with Arri III's, 435's and 235's. On a 435 they sit at a slight downward angle, but still do their job of keeping film displacement weight from affecting the balance of a steadicam rig. Very versatile mags, and lighter than Arri's own 435 steadicam mags at 1.5 KG! They will run 130fps forward only. They are made of magnesium. These mags alone are $4250 US new each! They are light-tight and very clean - I have never had film scratched. Never have needed to tape the mags in even bright sun. I have had these mags overhauled by the manufacturer (SL Cine) a couple of years ago (they have hardly been used since) to all the newest parts internally. Here is SL Cine's web page about these mags: http://www.slcine.com/html/stead2.html Included is a new custom made flight case (made by Engineered Cade Manufacturing in Toronto) that securely holds all three magazines. If you would like more photos or information, please contact me.
  12. This is something I had made for jobs I was doing as a steadicam operator in countries abroad that were PAL. I use a Modulus 3000 as my main transmitter, but it only does NTSC, so this system was my PAL back up. However, this system will do both - NTSC and PAL!!! I don't use it anymore, and will likely upgrade to a Modulus 4000 if they prove to be reliable. This system only was used a few times and then sat on my shelf for a couple of years. Its in top notch shape, very little signs of use. The LCD screen is completely clean and scratch free. The Panasonic TC-7WMS1 LCD screen is velcroed very securely to the inside of the lid of the rugged Underwater Kinetics case that it is housed in. The monitor is wired into the Coherent CVR-200 900Mhz Receiver inside the case. There is a 4 pin XLR cable mounted into the case to allow for powering of both the LCD and CVR-200 from a single external 12v battery source. Included in this auction are: 1x Panasonic TC-7WMS1 7" LCD 16:9 Screen 1x Coherent Communications CVR-200 900 MHz Reveiver with Antenna 1x CVT-M Matchbox Wireless Video Transmitter 1x CVA-3 Miniature Power Amplifier*** 1x Underwater Kinetics Case w/4-Pin XLR power port modification 2x High Gain Antennae 1x Custom 4-pin Lemo mini to Y-Split dual Hirose 4-pin cable (for powering both CVT-M and CVA-3 off of my XCS Ultimate Sled) ***The CVA-3 module (as seen in my photos) piggy-backs with the CVM (I use velcro) and links together via supplied mini cable to boost the power of the CVM alone. In comparison to my Modulus 3000, I would say this combo is comparable in signal strength and quality. http://cgi.ebay.ca/Coherent-Communications...1QQcmdZViewItem
  13. The SL-400 mags that I posted here a while back are now on ebay, as well as some other bits of mine... http://cgi.ebay.ca/SL-400-Steadicam-Magazi...1QQcmdZViewItem
×
×
  • Create New...