Grayson Austin

Price reduction: $61,000 plus worth of pristine gear now priced at $48,000 US. Will not be selling outside the United States unless you have your own shipping/freight account. Grayson Grant Austin, SOC

Prices reduced: Sleeve: $600. Handle: $400. email to: graysonaustin@me.com

This item is no longer available. Grayson Grant Austin, SOC

This item is no longer available. Grayson Grant Austin, SOC

Up for sale is my pristine condition DJI Ronin2 Professional Package. This Kit is a comprehensive feature film and television system. Every item was purchased brand new by me and has never been sub rented. Only used on my jobs and has been meticulously maintained. It has been used almost exclusively as a remote head on dollies, jibs and technocranes with a small bit of handheld work (wire harness work actually) using Nodo Inertia Wheels (not included). This Ronin2 is pre DJI carbon fiber issues that some have suffered with and is running on a firmware that is absolutely rock solid. This Ronin2 does not drift. I can and have left it sitting in one position for periods of time (lighting sets, etc) and come back to the exact same frame. This Ronin2 has also been updated by 1A Tools with their 24 volt modification and has an upgraded/add on protector for the receiver D.bus comm port (see photos for both of these mods). Everything is in absolutely perfect working condition including the SDI through the slip ring. Many of the accessories are as new/unused. Comes with all of the following (and much more): *DJI Ronin2 Stabilized Three Axis Gimbal. *DJI Two Piece Ring With Ronin2 Dovetail Connector. *DJI Joystick Controller (As new/Unused). *DJI Ring Mountable Thumbstick Controller (As New/Unused). *CineMilled Cage Extensions (1st And 2nd Stage). *Ignite-Digi Counterweight And Accessory Cage Brackets. *CineMilled Short And Long Camera Plates With Various Counterweights. *Cinemilled Camera Top Plate (Old And New Style). Both Have Upgraded “Wings” To Fit Alexa35 Hole Spacing (The New Style Top Plate is New/Unused). *Arri SAM 9 Alexa35 Direct To Ronin2 Camera Plate (New/Unused). *Arri Alexa35 Top Mount With Ignite-Digi Top Cage Adapter (New/Unused). *CineMilled New Style Main Ronin2 Dovetail Connector (Original DJI Version Also Included). *Adapter To Freefly Systems Movi XL Quick Release System Which Includes A Quick Release To Male Mitchell Mount Which Is A Much More Robust System Than The DJI Quick Release. *CineMilled Low Profile Ronin2 Dovetail To Mitchell Mount Receiver Plate. *Two Different Pan Axis Locking Brackets (DJI And CineMilled). *CineMilled Pan Axis Counterweight/Battery Plate Mount. *CineMilled Quick Release Ring Mounts. *Stand Mounted (5/8 Baby Pin) Dual Arm Adjustable Docking Bracket. *All Original DJI Accessories Are Also Included (Except For Batteries). A Four Bank DJI TB50 Charger Is Included. *Full Custom Made Weather Cover Set (Two Piece). *Also Included In This Package Is A Motocrane ReVolt TB50 Slot To External Power Source Adapter. Pre-Ordered And Paid For and Will Be Included When It Ships. Cables: *Sony Venice (And All Other 12 Volt Cameras) 12 Volt Camera Power Cables (Two). *Arri Alexa Mini 12 Volt Camera Power Cables (Two). *Arri Alexa35 (And Mini) 24 Volt Cables (To Be Used With 1A Tools Upgrade Connector (Two). *1A Tools Alexa35 24 Volt Long Power Cable from Ronin2 Battery Hub (One). *Red Komodo Camera Power Cables (Two). *All Original DJI Supplied Cables Not Already Listed Are Also Included. *Original DJI Ronin2 Case. You Will Not Find A Cleaner, More Heavily Upgraded Ronin2 Out There. This Kit Was Put Together To Go Onto Any Set And Get The Shot Without Issue. It Has Made Me A Great Deal Of Money These last Few Years But Now I Am Trying To Streamline How Much Gear I Carry With Me On Jobs. One Of The Last Jobs This Ronin2 Did Was The Disney Movie, Crater (Out Now On Disney+). I Was The A Camera/Steadicam Operator And We Used The Ronin2 Often For VFX Shots, (Blending Flawlessly With Other Stabilized Heads Like The Matrix And Scorpio Mini V) As Well As A Lunar Surface Sequence With The Stunt Coordinator “Piloting” The Ronin2 On A Wire Harness Rig And Me Operating From Wireless Wheels (See Photos). It Worked Beautifully. You Can See Many Examples Of This Gimbal At Work Throughout The Movie. This is a Very Comprehensive Package Of Gear Worth Well Over $17,000 US. I’m Selling Everything Listed Here And Much More For $11,000 US. No Batteries Are Included Due To Shipping Hassles With Lithium Batteries And I Currently Use All My TB50 Batteries For All My Other Things. Serious Only Please. Email Me For Faster Response to: graysonaustin@me.com Grayson Grant Austin, SOC All Photos Were Taken By Me And Are My Property. They Are Not To Be Used By Anyone Else For Any Purpose.

Please read entire post carefully before emailing. For sale is a very complete, turnkey Tiffen M2 Steadicam rig. Meticulously maintained. Never sub rented. I personally picked each and every component and accessory to make this the very best M2 system possible and to match my main rig for quick changeover if needed. However, since my main M2 Volt rig has been absolutely bulletproof, i find myself not needing to carry around two complete rigs. Many/most components and accessories for this rig are as new/unused (other than testing). Sale Includes: M2 Rig with *M2 Tilting Topstage and built in Volt Sensor and controls. *Tiffen M2 Camera Dovetail Plate. *M2 1.58 inch Two Stage telescoping Centerpost. *Tiffen M2 As New/Unused Volt Gimbal with new GPI PRO Pan Bearing. Complete check out and firmware update from Tiffen last week. Your choice of 3/4 (Tiffen) or 5/8 (PRO) handle insert. *Spare Tiffen M2 As New/Unused Pan Bearing. *Your choice of Tiffen 3/4 inch or PRO 5/8 inch angled Low Mode Bracket. *Volt Gimbal Rain/dirt Cover. *Larry McConkey Volt Button extensions (short and long). *Jerry Holway Volt Cable Cover. *Jerry Holway Volt Counterweight Trim Kit. *Volt Motor Drive Cables (Two). *Spare Volt Motor Belts (Two). *Tiffen Blue Whale Gimbal Tool. *Tiffen M2 Telescoping Monitor Mount and Yoke System. *TV Logic Super High Bright (3600 Nits) Monitor. There is no brighter/Daylight Viewable Flat Panel Monitor currently available. Comes with dedicated yoke mounts made for this monitor. *Monitor Rain Cover. *CineLevel Sensor Box and Display. *Level Sensor Monitor Rod Mount. *Tiffen M2 Monitor Power Cable. *Tiffen M2 V Lock Two Battery Tilting Lower Electronics Base. *Jerry Holway M2 Base Switch Cover. *Jerry Holway Rod End Cable Routing clamp. *Tiffen M2 3rd Battery V Lock Plate with Dovetail mount. *V Lock to Anton Bauer Plate Converters. *Lower Electronics/Battery Rain Cover. *M2 Camera Power Cables for Arri Alexa (full size), Alexa Mini (and others) 12 volt, Alexa 35 (and Mini) 24 volt, Sony Venice (and other 12 volt cameras), Red Komodo. *Jerry Hill Gorelock (GAD2) With Tilt Function. Complete docking and spin balance bracket with one Docking Ring. Your choice of Tiffen 3/4 or PRO 5/8 spin balance. *Tiffen M2 Sled Case. Paid $35,500+ new for everything. Selling everything listed here (and more) for $28,000 US for a savings of over $7,500 US. Serious only please. Email me for faster response and more photos to: graysonaustin@me.com Grayson Grant Austin, SOC All photos were taken by me and are not to be used for any other purpose.

Please read entire post carefully before emailing with questions. No window shopping please. For sale is an absolutely pristine, turnkey Ravensclaw High Payload (rare) version of Talon Head, complete with tons of accessories, upgrades and cables: *High Payload Talon Head: This is not the standard version of Talon Head which peaks at 50 pounds of payload. This is the High Payload version from Ravensclaw (the actual manufacturer) and is rated at 75 pounds (easily) of payload and is fully stable even without the outrigger. This head has been completely redone inside and out with the brushless motor upgrade, high payload bearing upgrade, the backpan/stabilization upgrade which can be individually turned on and off for each axis, all new electronics and wiring within. This is essentially a new head. *The Control Console/Wheels: Also completely redone inside and out with updated electronics, wiring and new carbon fiber casing outside. A brand new (new style) set of wheels which are as new/unused as well as the original style wheels included. Console is Mitchell mount with a castle nut. Comes with two wheel interconnect cables. *(Two) 2 inch risers (electronic connections). *Outrigger/Side stabilizer allows for even larger builds with more extreme dynamics. *Standard and offset camera dovetail mounts. *Arri style dovetail mount as well as a brand new (still in plastic) Wooden Camera 12 inch dovetail. *Both the original standard mitchell as well as a brand new/unused new style keyed Mitchell mount and castle nut and castle nut wrench (two). *Long Power and Control Cables with duplicates (and more) of each. *Block battery adapter cables (two). *A/C power supply box. *Case included and will include brand new interior which allows for head to stay built with outrigger attached which is being fabricated now. This is a very complete, turnkey two axis remote head that is absolutely bulletproof. Has all the regular Talon Head features like repeatable moves, etc. Because it has been upgraded with the backpan/stabilization feature, this head is fantastic for car mounting and other applications. Turn on or off each axis of stabilization depending on the situation. This is why most stabilized heads have an issue when mounted to the actual vehicle being shot. A typical stabilized head wants to maintain it’s heading even when the vehicle turns. With this Talon Head, you can turn the stabilization off for pan but keep it on for the tilt axis or off all together. The brushless motor upgrade makes this head even more accurate, repeatable and quiet even at high speeds. Never sub rented. Only used on my jobs. Selling everything complete for: $35,000 US. You can message me through the forum but i may or may not get it quickly so please email for questions, more details and more photos to: graysonaustin@me.com Grayson Grant Austin, SOC All photos were taken by me and are my property and are not to be used for any other purpose.

I have an unused/as new XCS gimbal sleeve for Tiffen centerposts. Use your XCS gimbal on a 1.58 inch Tiffen M2 centerpost or Ultra2, Shadow, etc. Selling for $750 US. XCS standard gimbal handle unused/as new. can be used on XCS or PRO gimbal. Selling for $500 US. email me at: graysonaustin@me.com Grayson Grant Austin, SOC

Budget friendly Cinegears wireless HD video systems for sale: (1) Cinegears 600M (2000 ft plus) external antenna receiver 1:1 system. 10 channels. HD-SDI and HDMI inputs/outputs. Works beautifully. Selling for $1500 US. (2) Cinegears 600M (2000 ft) internal antenna 1:1 receiver systems. HD-SDI and HDMI. All 600M systems use the same transmitter and all units are compatible with each other as they use the same transmission channels. Selling each for $1000 US. (1) Cinegears Ghost Eye 400M (closer to 500M) 1:1 system. 12 channels. HD-SDI and HDMI. Not compatible channel-wise with the 600M. Selling for $750 US. All of these were backups to a much larger kit and have not been used on set. Only for testing. All systems come with a full set of antennas and a power cable for each unit and a case if available. email me at: graysonaustin@me.com Grayson Grant Austin, SOC

A sale fell through. Please do not contact me if you don’t have your finances in order. In other words, no window shoppers please. Price reduced: $61,000 worth of gear in pristine condition. Many items unused/as new. Now selling entire package for $49,000 US. Because i have had so many inquiries about splitting up the XL and the Fiber Optic Gyro, here is the option: Fiber Optic Gyro: if purchased new $27,500 US. Selling for $25,000 in pristine, untouched, as new condition. Comes with pelican case and two comm cables. There will be no price reductions for this item. Movi XL package without Fiber Optic Gyro: Selling for $25,000 All gear is in pristine condition and never sub rented. Anyone purchasing the complete package of Movi XL with the Fiber Optic Gyro will also have the opportunity to purchase a set of three axis Nodo Inertia Wheels (Max upgraded) for a discounted price. Email only please to: graysonaustin@me.com Grayson Grant Austin, SOC

Sold

Walter Klassen Hard Mount for sale. Great condition. This one is my 2nd one and was set up for Segway or speedrail only applications. Pipe/Speedrail clamp with reducer included. Does not include mitchell mount but this can be purchased separately from Walter Klassen. Adjustment knob is currently set up for regular side operator but can be used for either side. Hands down best Steadicam vehicle mount out there. If purchased new, this setup would cost over $1150 US for Hardmount, clamp and reducer. Selling all for $750. email to: graysonaustin@me.com Grayson Grant Austin, SOC

More items sold. Prices reduced on last remaining items: 1 left of 1:1 or 1:2 Storm 3000 transmitter and Storm 3000 Standard V Lock Receivers system. 1:1 system now $3000. 1:2 system now $4000 US. Purchase the 1:2 system and receive a free Vaxis Channel Scanner. 1 left of 1:1 or 1:2 Storm 3000 transmitter and Anton Bauer pass through receivers system. 1:1 system now $4000. 1:2 system now $5500 US. Purchase the 1:2 system with Anton Bauer pass through receivers and receive a free Storm 800 receiver. Vaxis Cine8 Monitor/Receiver still available after a sale fell through. Selling for $3800 US. See original post for details and listed accessories, etc. When contacting me, please let me know what country/location you are in so i can make sure of shipping availability and any funds transfer issues so neither party wastes their time. Email for faster response: graysonaustin@me.com Grayson Grant Austin, SOC

I have two SmallHD 702 monitors and two Atomos Shogun Flame Monitor/Recorders for sale. All of them have specific monitor cages included. Both 702 monitors also come with Rencher Industries 2 pin power/pass through battery adapters. The Atomos monitors are both in excellent condition with very little use and have always been used in an additional dual cage directors monitor setup. Screens are perfect. Both come with one empty recorder drive caddy. 702 monitors have mostly been used as operating monitors and show signs of use on their surface and cages but screen are still in excellent condition. Selling 702 monitors for $600 each or buy both for $1000 US. Selling Atomos Monitor/Recorders for $750 each or buy both for $1200. Email for faster response please: graysonaustin@me.com Grayson Grant Austin, SOC

Both Spin Balance portions have sold as well as the Cinewidgets Docking Fork and rings. Complete Jerry Hill Gorelock GAD2 and Balance Bracket with Tiffen size 3/4 balance spuds still available. Grayson Grant Austin, SOC

For Sale: *(1) Complete Jerry Hill Docking Bracket with Gorelock GAD2 with 3/4 inch (Tiffen) studs and docking stand stabilizer. Docking rings are not included. Selling for $800 US. *(2) Jerry Hill Spin Balance portions only with 5/8 inch (PRO) studs on both and expanded armpost and tool holder on each. Selling for $400 US each. *(1) Cinewidgets Jerry Hill compatible gorelock style docking bracket with two 2 inch docking rings. $200 US Email to: graysonaustin@me.com All photos were taken by me and are my property and are not to be used for any other purpose (this means you scammers). Grayson Grant Austin, SOC

For sale is an absolutely pristine M2 Volt Gimbal system. No dings, scratches, blemishes. The gimbal and Volt Nose Box have always been covered. This gimbal has a new PRO pan bearing installed. Kit includes: *Tiffen M2 Gimbal (set up for Tiffen M2 sled with 1.58 inserts but can be changed for 1.75 or 1.5 by purchasing inexpensive insert sleeves from Tiffen). *Tiffen Volt System with drive, nosebox, interconnect cable and nosebox power cable (drive is installed on gimbal and calibrated). *Additional spare Tiffen Interconnect cable. *Jerry Holway Volt cable protector. *Jerry Holway Volt Trim Balance kit (essential for proper trim/Volt operating. *Larry McConkey Volt Button extensions (Long and Short). *Volt Gimbal Weather cover. *(2) Spare belts. *Nosebox accessory mounting plate (for low mode monitor mounting, etc.). *Tiffen Blue Whale gimbal tool. *Tiffen Pan Bearing (as new/unused) as a spare. Total paid for everything: almost $12,000 US. Selling everything listed for: $9750. Serious only please. US buyer preferred. Email for faster response and additional photos. Grayson Grant Austin, SOC graysonaustin@me.com

As new, unused TV Logic F-7H Mk2 monitor for sale with extras. This version is 3600 Nits brightness (brighter than just about anything else including the SmallHD 703) and has an anti-glare screen as well. Set up for Steadicam with a Cam-Jam monitor yoke. Also has Sony battery plate on back which can use Rencher Industries dummy battery to 2 pin (not included). Cables included: (2) P tap to monitor. (1) Arri 2 pin to monitor. Also includes monitor cage for off steadicam use and case. This monitor by itself retails for over $2000 and with the cables, yoke and case cost me more than $2500. I am selling everything listed for $2000. Serious only please. US buyer preferred. email for faster response and additional photos: graysonaustin@me.com Grayson Grant Austin, SOC

Price Reduced: $50,000 US. Email or message for more details and photos. graysonaustin@me.com Grayson Grant Austin, SOC

Prices reduced on remaining wireless sets: *1:3 system with one regular Storm 3000 transmitter and three Anton Bauer pass through receivers now $9500. Includes free channel scanner ($300 value) and Storm 800 receiver ($1000 value). *1:1 systems (two) with one Storm 3000 transmitter and one regular Storm 3000 V mount receiver now $3500 each. email for more details and photos. graysonaustin@me.com Grayson Grant Austin, SOC

Last of my extra Vaxis Storm 3000 systems for sale. *One regular Storm 3000 transmitter and three Storm 3000 Anton Bauer pass through receivers. Buy this set with three receivers and get a Storm 800 receiver and Vaxis channel scanner free. Storm 3000 system with regular transmitter and three Anton Bauer pass through receivers retails for $14,624 not including Storm 800 and channel scanner. Selling for $10,000 including free Storm 800 receiver and channel scanner. *i also have two sets of one Storm 3000 regular transmitter and one standard Storm 3000 receiver (V mount on back). Each 1:1 system retails for $5680. Selling each system for $3750. *Vaxis Cine8 Monitor/Receiver (Anton Bauer mount) also available. Has the equivalent of a Storm 3000 receiver built in and can use either the internal antennas or external Vaxis antennas. This monitor/receiver is unused and includes antennas, deluxe cage with handles, screen protector, neckstrap, baby pin mount and case. Retails for $4388. Selling for $3800 if purchased separately. Purchase with the above Anton Bauer Pass through system for $3500. All gear is in excellent condition and has never been sub rented. Only used on my jobs. Please email me for more info and additional photos. Grayson Grant Austin, SOC graysonaustin@me.com

Heavily Modified Movi XL With Fiber Optic Gyro, Ignite-Digi TB50 Battery Adapter, Power Block, Brutal R&D Slipring And Tons Of Accessories For Sale: Please Read Entire Listing Carefully Before Contacting Me. For sale is an excellent condition Movi XL package. An incredibly complete Feature Film, Series, Commercial ready package in excellent condition and perfect working order with all needed accessories and cables including flight/travel case. Package Includes: Movi XL 3 Axis Stabilized Remote Head With Optical Gyro And Flight Case. Brutal R&D Full Slipring system for power and video (brand new/unused) with two remote power cables (new/unused). Complete Mimic system w/ Atomos Shogun Flame High Bright Monitor, Camera Cage With Handlebars and Anton Bauer Battery Plate, Mini Sliding Dovetail (to attach Mimic system to your favorite Fluid Head or Geared Head with an Arri Sliding Dovetail Plate), Mimic Quick Release, Antennas (short and long) and Charging/Power Cable. Arri Style Camera Plate (19mm studio). XL Dovetail Plate. XL Lens Support. XL Rod Support. 19mm Carbon Lens Support Rods (various lengths. X3 sets). Pop and lock 50mm. Movi XL Chargers (2). Movi XL Wiring Harness spare. Quick Release Kit. Movi XL to Mitchell Mount. Custom Easy 90 Degree Mitchell Male to Mitchell Female (For Nose Mounting Of The XL. New/Unused). Ignite Digi TB50 adapter and power block (original Movi XL battery plates included as well). The Power Block is new/unused). Ignite Digi power cables (2) for Alexa Mini, Mini LF and Alexa 35 (New/Unused). Ignite Digi 12 volt camera power cables (2) to universal 4 pin XLR. 4 Pin XLR to Anton Bauer adapter (X2) Plates. Extended Length 25mm Carbon Fiber Vertical Cage Rods (allows for a full studio build camera to go in the cage with the handle on it). The original cage rods are also included. Various P Tap power cables also included. Movi XL to NODO Inertia Wheels/Alpha Wheels Wireless Receiver Comm cables (X2) included. And many extras not listed here. No batteries are included in this sale as i use them (TB50) for my other remote heads and they are difficult to ship without carrier issues. A small sample of recent projects this Movi XL package has been used on include: Green Book. Anne Rice’s Mayfair Witches. On Becoming A God In Central Florida. Queen Sugar. NCIS: New Orleans. Crater. Filthy Rich. The Movi XL has a 50 pound camera payload and with the Fiber Optic Gyro is exceptional at stabilizing under all conditions and is immune from temperature changes or G Force. This entire package has been exceptionally well cared for and maintained. It has never been sub rented. It goes out only on my jobs. I purchased every item listed here brand new. Total to purchase everything listed new would be more than $61,000 US. Selling everything listed plus many useful extras: $51,000 US. Available Now. Expand your business. Start earning rentals now. Add A Flowcine Tranquilizer (complete with all available polymers and passive weight plates). Also comes with Shore 70 Pan Barrels. Mitchell Female Mount. Mitchell Male Mount. Overslung Mod with polymers and air bladder. Total to purchase new would be over $3000. Purchase with Movi XL Package: $1500. Purchase Separately: $1900. Serious only please. Please don’t email if you don’t have the funds available to purchase. I am also not splitting up the package at this time (other than the Tranquilizer) so please don’t ask. Use email address below to get to me quicker as i don’t check here that often. All gear is located in New Orleans, Louisiana area. Buyer is responsible for shipping costs and any insurance needed and optimally should have their own shipping account available(Fedex, UPS, DHL, etc). Email for additional photos and for further questions/details. Local pickup/Inspection is also available working around my current shooting schedule. Grayson Grant Austin, SOC graysonaustin@me.com

New Update: One more regular Storm 3000 receiver sold. Last items now remaining: 1)Regular Vaxis Storm 3000 Transmitter with up to three Vaxis 3000 Anton Bauer Pass Through Receivers. $7000 US for 1:2 system. $9000 for 1:3 system. 2)Regular Vaxis Storm 3000 Transmitter and two Regular Vaxis 3000 Receivers (V-Lock on back). $6000 US. First person to buy either system with two (or more) receivers at full price will get a free Vaxis Storm 800 receiver and a free Vaxis Channel Scanner. Either system can be a mix of Anton Bauer Pass Through and regular receivers as well. They are interchangeable and operate on the same twenty channels. Anton Bauer Pass Through Receivers are an extra cost. Each transmitter comes with mounting arm (pictured). Each regular V mount receiver comes with baby pin mounts. Both systems come with antennas (choice of Vaxis blade or stubby) and power cables. Channel scanner is as new/unused. 3000 feet line of sight. Easy channel selection. Rock solid performance beating out Teradek 3000 XT time and time again. the transmitter with the pass through receiver package is unused/as new. serious buyers only please. Email if interested. Grayson Grant Austin, SOC graysonaustin@me.com

Update: Anton Bauer Pass Through Transmitter/Receiver system is sold. The last couple of systems available are: 1)Regular Vaxis Storm 3000 Transmitter with up to three Vaxis 3000 Anton Bauer Pass Through Receivers. 2)Regular Vaxis Storm 3000 Transmitter and up to three Regular Vaxis 3000 Receivers (V-Lock on back). First person to buy either system with two (or more) receivers will get a free Vaxis Storm 800 receiver and a free Vaxis Channel Scanner. Either system can be a mix of Anton Bauer Pass Through and regular receivers as well. They are interchangeable and operate on the same twenty channels. 3000 feet line of sight. Easy channel selection. Rock solid performance beating out Teradek 3000 XT time and time again. one of the transmitters and one of the regular receivers are unused/as new. serious only please. Email if interested. Grayson Grant Austin, SOC graysonaustin@me.com

Last of my extra Vaxis Storm 3000 systems remaining: System 1) Vaxis Storm 3000 Anton Bauer pass through 1:1 Transmitter and Receiver system. Comes with antennas, power cables, and a free Storm 1000 Compact receiver (Anton Bauer Mount). Price if purchased new, $6580 (without the Compact receiver). Selling all for $4800. System 2) Vaxis Storm 3000 Standard system (V-Lock receivers but can be converted to anton bauer) 1:2 Transmitter and receivers. Comes with antennas, power cables, and a free Storm 800 receiver (V Mount) and a free Vaxis Channel Scanner. One of the standard receivers is as new/unused. Price if purchased new, $9080 (without Storm 800 receiver). Selling all for $6000 (price reduced). All gear was purchased directly from Vaxis by me and has only been used on my jobs. No sub rentals. These are the last of my excess systems. All gear is in fantastic condition and works perfectly (one receiver as stated is as new/unused). Serious only please. Email only please. Thanks. Grayson Grant Austin, SOC graysonaustin@me.com